Trycom Technology TRP-C41 Manuale utente

TRP-C41

User’s Manual

Ethernet To Fiber Media Converter

User’s Manual

Printed Oct. 2013 Rev 1.2

Trycom Technology Co.,Ltd

No.35, Zhongxing Rd., Guishan Township, Taoyuan County 333, Taiwan.

Tel : 886-3-350-3351 Fax: 886-3-350-3352

Web: www.trycom.com.tw

function and does not represent a commitment on the part manufacturer. No part of this manual may be

reproduced, copied, or transmitted in any form, without prior written permission by the manufacturer. Products

mentioned in this manual are mentioned for identification purposes only. In this manual, product names appearing

may or may not be registered trademarks of their respective companies or copyright.

1. Introduction

TRP-C41 is a device for Ethernet extension over fiber, it supports point-to-point and networked

systems. The high fiber bandwidth connections solve problems with electrical noise and different

ground potentials over long transmission lines. TRP-C41 supports 10/100Base-TX transmissions

up to 100 meters and 100Base-FX transmissions up to 60KM. It is the perfect solution for wide

distance connections with high immunity to electrical noise.

1-1. Features

 Wide input range DC power supply.

 Plug-and-Play design for the installation within seconds.

 Compact and Rugged Metal case capable of withstanding harsh environment.

 Data rate: 10/100Mbps auto-negotiation and half-/Full-duplex mode on TX port.

 Auto MDI-X/MDI-II for 10/100Base-TX port.

 Provides media conversion from UTP to Fiber Optic media types

 Supports link fault pass through function.

 Supports far end fault function.

 LED display to indicate the whole working status.

 3 power input types: Direct USB power, external DC adapter and screw terminal.

 Support IEEE Standard: 802.3u 100BaseTX & 100BaseFX.

1-2. Specification

 Cable: Fiber cable (9/125um).

 One 10/100Base-TX auto-negotiation Ethernet RJ-45 port.

 One 100Mbps fiber port with Single-mode SC connector.

 Built in 128Kb RAM for data buffer.

 Wavelength: 1310 nM.

 Fiber Power:-15 ~ -8 dBm.

 LED indicator: Power and power and TX and fiber link/activity, full/half, 10/100MB.

 Distance : 20KM can be up to 60KM (option).

 Speed : Auto 10/100MB.

 Power Consumption: 12V/160mA.

 Power requirement: USB port power or DC input or screw terminal from +10 to 30V.

 Operating temperature：0 to 50℃.

 Storage temperature : -20 to 55℃.

 Humidity: 10-90% Non-condensing.

 Dimension: 151mm X 75mm X 26mm.

 Weight: 400g.

2. Hardware description

2-1. Panel layout

2-2. Block Diagram

2-3. LED Indictor

PWR-: Power LED.

E-LINK LED: Ethernet Connection.

E-SPD LED: Ethernet 100MB.

F-Link LED: Fiber Connection.

F-SD LED: Fiber cable detect.

F-FDX LED: Fiber Active.

DC Jack: Input from +10V to +30V (it is recommended to use the 5.5*2.1*12mm DC JACK).

3. Install TRP-C41

3-1. Power input type

The TRP-C41 has three power input types, power can be supplied from

1. 2-pin screw terminal block

2. External DC plug

3. USB port.

When power is properly supplied the PWR LED will lighting to indicate the system is up. User

can only choose one of the three power sources, do not connect different power source

simultaneously.

3-2. Select power source

User may select the power source by power select switch. The method is as below.

1. Find the power select switch located at the right side of 2-pin screw terminal block.

2. Move the switch to “USB PWR” to enable USB power input, and disable screw terminal and

external DC adapter. User may input power from USB port by USB A/B cable.

3. Move the switch to “EXT PWR” to disable USB power input, and enable screw terminal and

external DC adapter, user may input power from either screw terminal block or DC adapter.

3-3. Ethernet Connection

TRP-C41 support auto MDI/MDIX RJ-45 cable that mean user may use a straight-through or

crossover cable connection between TRP-C41 and Ethernet hub, switch, or wall plate. And also

can link directly to the NIC (Network Interface Card) on a PC or laptop. If the cable is properly

connected the “E-LINK” LED will light up.

3-4. Fiber connection

TRP-C41 has a 100Mbps fiber port with single mode SC fiber connector, user may use standard

62.5/125um, 1310 nM wavelength fiber cable for TX and RX connection, when fiber cable is

connected the F-Link, F-SD and F-FDX LED will light up.

4. Getting Start

1. Connect power source with TRP-C41.

2. Connect TRP-C41 with LAN port (Ethernet Hub or Switch) by RJ45 LAN cable.

3. Connect TRP-C41 with SC Fiber RX and TX cable

Indice

Altri manuali Trycom Technology Convertitore multimediale

Trycom Technology

Trycom Technology TRP-C08S Manuale utente

Trycom Technology

Trycom Technology TRP-C39 Manuale utente

Trycom Technology

Trycom Technology TRP-C32S Manuale utente

Trycom Technology

Trycom Technology TRP-C51 Manuale utente

Trycom Technology

Trycom Technology TRP-C31S Manuale utente

Trycom Technology

Trycom Technology TRP-C08H Manuale utente

Trycom Technology

Trycom Technology TRP-C08E Manuale utente

Trycom Technology

Trycom Technology TRP-C68 Manuale utente

Trycom Technology

Trycom Technology TRP-C36 Manuale utente

Trycom Technology

Trycom Technology TRP-C08D Manuale utente

Trycom Technology

Trycom Technology TRP-C34X Manuale utente

Trycom Technology

Trycom Technology TRP-C51 Manuale utente

Trycom Technology

Trycom Technology TRP-C34H Manuale utente

Trycom Technology

Trycom Technology TRP-C08H Manuale utente

Trycom Technology

Trycom Technology TRP-C06H Manuale utente

Trycom Technology

Trycom Technology TRP-C08 Manuale utente

Trycom Technology

Trycom Technology TRP-C51 Manuale utente

Trycom Technology

Trycom Technology TRP-C39S Manuale utente

Trycom Technology

Trycom Technology TRP-C08X Manuale utente

Trycom Technology

Trycom Technology TRP-C37 Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente