
AEOLOS / AEOLOS PLUS OPERATING MANUAL
_______________________________________________________________________________________
______________________________________________________________________________
TSAKIRIDIS DEVICES - TUBE AUDIO AMPLIFIERS
©2009 All rights reserved
2. Connection and Installation
• To prevent fire or shock hazard, do not expose this nit to rain or moist re.
• Dangero s voltages inside. Do not open the amplifier cabinets. There are no ser
serviceable parts inside. Repairs sho ld be carried o t by q alified service
personnel only.
• Take care to handle the power cord caref lly and not to crimp or damage it as this
can ca se electric shock or damage the device.
• Do not insert any objects into the amplifier.
• To install the device, select an open place with good ventilation. The amplifier
sho ld be placed so that the valves (vac m t bes) are always vertical.
• The amplifier operates with alternating c rrent voltage 240 VOLT, 50 HZ. Before
connecting power check that the req ired s pply voltage corresponds to yo r local
AC s pply. If a different voltage is stated, do not connect the amplifier to the mains
power, and seek advice from yo r dealer / distrib tor.
• Never p ll the power cable from the cord.
• Connect to the mains power sing a high q ality mains cable.
• Always disconnect the amplifier from the mains power before connecting or
disconnecting any of the inp t or lo dspeaker cables.
• Never expose the device directly to the s n or attempt to operate it o tdoors.
• Do not place the amplifier near radiators or other so rces of heat and generally
avoid placing the device in an adverse environment.
• All valve amplifiers need time to reach their optimal operating temperat re. We
recommend, therefore, that yo allow at least fifteen min tes for the amplifiers to
‘warm p’ before se. Warming p sho ld be done with the vol me control (on the
pre amplifier) set to zero, with no signal passing to the power amplifier.