TSI Instruments CH-23 Manuale utente
Revised: July 2022
CH-23
Stand for CH-22
description
READ INSTRUCTIONS THOROUGHLY BEFORE OPERATING
buyTSI.com - 800.223.4540
Contact us for any assistance
800.223.4540
Tire Service International, LLC
3451 S. 40TH ST.
Phoenix, AZ 85040
Ofce: 602.437.5020
Email: [email protected]
Fax: 602.437.5025
buyTSI.com - 800.223.4540
1. READ THIS MANUAL BEFORE OPERATING
2. SAFETY GLASSES ARE REQUIRED
3. Do not wear loose clothing.
4. Use with caution to avoice possible pinch points while operating
5. Before each use visually inspect the for loose bolts, and damaged or improperly assembled
accessory equipment.
6. Use in a clean area to avoid slipping and have enough room to operate safely.
Safety Requirements
Installation Requirements
Set-Up Instruction
General Description
• Remove machine from packaging materials.
• Prepare a clean, level surface with adequate room to maneuver tires around the unit.
• Fasten the CH-23 Stand to a solid surface. Use 3/8” hardware to bolt to a cement oor. (If using
the optional Floor Plate, secure it rmly to oor using 3/8” hardware and bolt the units together.)
• Insert the leverage bar, if necessary adjust shoe height for the tire size.
No power or air requirements, but unit should be bolted to a solid, clean, level surface.
TSI has developed a Floor Stand (sold separately)for this purpose.
The CH-23 Stand w/Bead Breaker is primarily used in conjunction with mounting the CH-22
Small Tire Changer (sold separately) on it.
As a Bead Breaker it’s fully adjustable to accept many ranges of tire sizes and using it is quick,
easy and effortless.
buyTSI.com - 800.223.4540
Primary Parts
Plate to mount the
optional CH-22
(sold separately)
Shown mounted to a very durable Floor Plate (an optional accessory) that bolts to the oor.
The CH-23 is 12” wide x 22.5” long x 26.5” high. Shipping weight is 46 pounds.
Floor Plate
PN 6192
(sold separately )
Three Tool
Holders
Wheel
Locator
Leverage
Bar
Main Stand
With Bead Breaker
Fig. 1Fig. 1
buyTSI.com - 800.223.4540
Operational Instructions
Use
Deate the tire.
Place the inside edge of tire on wheel locator.
Position bead breaking shoe in bead area and
adjust the pivoting tube to an appropriate
height with pin (see A). It should be situated
above the tire to apply a reasonable amount
of pressure with the leverage bar in order for
the shoe to displace the bead from the rim
(see B).
It may be necessary to rotate the tire around
the Wheel Locator (see C) and repeat
operation until the entire bead is loose from
the rim.
Flip tire over and repeat.
Adjust
For wider tires simply adjust pin (see A) and
proceed. There are four heights to choices.
Make sure the area around shoe is free from
hands or ngers before prying down on
leverage bar.
Store the leverage bar on tool holder when
not in use.
Maintenance
If pivot tube becomes loose tighten the bolt
holding it in place.
Lightly lubricate with oil or grease.
Make sure the CH-23 remains bolted down
rmly while in use.
Fig. 2Fig. 2
AA
BB
CC
LeverageLeverage
BarBar
buyTSI.com - 800.223.4540
Options and Accessories
The optional CH-22 comes complete with
the fully adjustable rim clamps and 2 center
posts to accommodate open hub and bearing
wheels. It is easily mounted on the top of the
CH-23 Stand.
Optional Floor Plate
PN 6192
The complete package is shown below which
includes the CH-22 Small Tire Changer,
the CH-23 Stand, and the 6192 Floor Plate.
All are sold separately. This Manual Tire
Changing Station makes the tire changing
job easy, fast and economical. No other multi
tire changer works as well as the CH-22 ... we
GUARANTEE it.
buyTSI.com - 800.223.4540
Notes
buyTSI.com - 800.223.4540
Warranty and Return Policy
Warranty & Workmanship you can depend on.
With over 30 years of manufacturing experience we maintain the ability to provide competitive
prices while employing and manufacturing the majority of our products in the USA. Pride in
our workmanship and standing behind each and every product is not just our claim but our
uncompromising responsibility.
Tire Service International equipment is warranted to be free from defects in materials and
workmanship for a period of one year from the date of original purchase to the original owner.
Repair labor is warranted for 90 days from the date of original purchase. Bushings, blades, bearings
and normal wear and tear are not covered under warranty. Careless handling, negligence, misuse,
abuse, mutilation, improper operation, making unauthorized repairs, additions, and or alterations
automatically cancel this warranty and relieves TSI of any obligation. Cheetah tanks claimed to be
defective while under warranty will be evaluated at our manufacturing plant and either repaired
if possible or exchanged and returned or credit issued to the customer account at our discretion.
Damage resulting from dropping the tanks will not receive warranty consideration. Warranty parts
need to be returned prepaid to the plant for credit. Any replacement parts shipped from the plant
will be shipped at the customer's expense. Machines requiring warranty work must be brought to
the manufacturing plant in 201 Chelsea Rd, Monticello, MN or to a repair facility authorized by TSI.
!!WARNING!! Goods returned without an RGA will be refused. A Returned Goods Authorization
form must be obtained before returning any material or goods. All non-warranty returns will be
subject to a 15% restocking fee plus any additional charges for reconditioning/repacking.
Visit www.buyTSI.com for any additional information. Also be sure to follow us on all the Socials,
and subscribe to our YouTube channel for all our product videos.
Copyright © 2022 Tire Service International, LLC
No part of this manual may be reproduced
without specic approval from Tire Service
International, LLC.
Register your product
online!
www.buytsi.com/registration
Indice
Altri manuali TSI Instruments Rack e supporto
