ENGLISH
7
4) Scan/Lock Button
Scan : Press this button momentarily to start
scanning upward to catch any channels that are
occupied by others.
To activate/deactivate the channel scan, press the Scan button
briefly. The Scan icon will appear when the channel scan is
active. Scanning will only stop when you deactivate the scan
function.
Turn the channel selector counter-clockwise during scanning in
order to change the scanning direction.
The transceiver will scan through the whole transceiver
channels. If your transceiver detects a valid signal the scan will
pause for the period that has been set by the menu mode setting
(continuously receiving or 1-99 seconds for scan receive time
and immediate response or 1-99 seconds for scan delay time).
If you press the PTT button when your transceiver detects a
signal, the radio will transmit on the same channel. Scanning
will resume after the scan receive time and/or the scan delay
time. Use the channel selector or quick up/quick down selector
to resume scanning immediately.
If you press the PTT button during scanning, the radio will
return to your original channel. Scanning will resume after the
scan receive time and/or the scan delay time. Use the channel
selector or quick up/quick down selector to resume scanning
immediately.
Lock : Press this button for more than 2 seconds to activate
and deactivate the keypad lock function. This function locks
only the channel selector, quick up/quick down buttons, scan
button. Other buttons and selectors work normal.
5) AM/FM and LCR Button
When the transceiver is used in UK, UE, or EC
freequency band modes this button activates or
deactivates Last Channel Recall function. In all
other modes (where national regulations permit
this), this button allows user to switch between AM and FM
modes by momentarily pressing this button.
