TTikorea TX-1446 PLUS Manuale utente
PMR 446 TRANSCEIVER
INSTRUCTION MANUAL
www.ttikorea.co.kr
Thank you for purchasing this radio.
All our products are built to offer excellent
value by combining advanced features,
great design and manufacturing quality.
To ensure you are familiar with the operation
and features of your radio, and in order to
obtain the best performance, please read
this manual carefully before operation.
ENGLISH
ENGLISH
Caution...................................................... 4
1.Radio Controls........................................... 5
2.Equipment andAccessories Supplied....... 6
3.Fitting the Battery pack.............................. 6
4.Battery Charging....................................... 7
5.Radio Controls........................................... 8
6.LCD Display............................................... 9
7.Basic Radio Operation............................. 10
8.Radio IDEditing ....................................... 10
9.Function Mode - User Mode.................... 11
10.Function Mode -Advanced Mode............ 12
11.Radio Features Explained....................... 13
Volume level.......................................13
Channels........................................... 13
Power Hi / Low ................................. 13
Privacy Codes................................... 14
Scan Pause Timer............................. 14
Hands Free (VOX) Mode................... 15
Busy Channel Lock Out (BCLO)....... 15
Priority Channel................................. 16
Priority Channel Scan Time............... 16
Dual Watch........................................ 16
Roger Beep....................................... 17
Key Beep........................................... 17
Time Out Timer.................................. 18
Call Alert............................................ 18
Clone................................................. 18
Squelch Level.................................... 19
Monitor............................................... 20
Display & Keypad Backlight.............. 20
Channel Scan.................................... 20
Privacy Code Scan/Decode.............. 21
Battery Level..................................... 21
Power Save....................................... 21
Keypad Lock...................................... 21
12.Troubleshooting........................................ 22
13.Safety Requirements................................ 22
14.Technical Specifications........................... 23
CONTENTS
4
TX-1446 plus
Caution
ENGLISH
IMPORTANT - READ ALL INSTRUCTIONS carefully and
completely before operating your radio and retain this manual
for future reference.
NEVER connect the radio to a power source other than the
supplied battery. This may damage your product.
NEVER operate your radio with the antenna less than 5cm
from exposed parts of the body.
NEVER use the radio in or near a mining facility or other area
which uses remotely triggered explosives or an area labelled
"Blasting Area".
NEVER use or charge your radio in a potentially explosive
atmosphere.
DO NOT place your radio in front of a vehicle airbag.
DO NOT operate your radio on board an aircraft.
DO NOT use your radio with a damaged antenna.
DO NOT attempt to modify your radio in any way.
ALWAYS charge your radio at normal room temperature.
ALWAYS switch off your radio where notices restrict the use of
two-way radio or mobile telephones.
ALWAYS replace the accessory jack cover (if applicable)
when the jack is not in use.
ONLY use TTI approved rechargeable batteries with the
supplied charger.
AVOID exposing your radio to water. It can widthstand spray
water and some rain, but has no higher waterproof class.
AVOID storing or charging your radio in direct sunlight.
AVOID storing or using your radio where temperatures are
below -20ºC or above +60ºC.
4
5
6
11
12
10
13
14
15
1
3
2
7
816
9
5
TX-1446 plus
1
2
3
4
5
6
7
8
9
Strap Hole
TX/RX Indicator
Antenna
PTT Button
Squelch & Monitor Button
Scan & Tone Button
Microphone
Mode & VOX On/Off Button
Keypad Lock &
Priority Channel Button
10
11
12
13
14
15
16
Power On/Off &
Volume Control Knob
Jack Cover Lid Holder
Accessory/Hanger Jack
Speaker
LCD Display
Up Button
Down Button
ENGLISH
1. Radio Controls
Fitting
1. Ensure that your radio is switched off.
2. Align the bottom of the battery pack with the securing slots at
the back of the radio.
3. Press the top of the battery into the back of the radio until it
'clicks' home.
Removal
1. Ensure that your radio is switched off.
2. Press down on the battery release catch and separate the
battery pack from the radio.
6
TX-1446 plus
Fitting Removal
1. TX-1446 plus radio (with fixed
antenna)
2. Li-Ion Battery pack (1000mAh)
3. Charging Cradle
4. Power Adaptor
1 unit
1 unit
1 unit
1 unit
1 unit
ENGLISH
2. Equipment and Accessories Supplied
3. Fitting the Battery pack
7
TX-1446 plus
LED
ENGLISH
To charge your radio, carefully follow these instructions:
1.Connect the power adaptor to the mains power supply and
connect the adaptor dual charger jack to the charging cradle.
2.Disconnect any radio accessories and ensure the radio is
switched off.
3.Insert the radio into the charging cradle until it 'clicks' home.
The charger LED will glow red and charging will start. If the
charger LED blinks red and green or the charger LED does
not light, re-insert the radio into the charging cradle.
4.The battery charging time is typically 4 to 5 hours. When the
battery is fully charged the charger LED will turn green.
4. Battery Charging
Charge Cradle
Adaptor Power Plug
Power Adaptor :
- Input: 230VAC
- Output: 9VDC
* This radio can also be charged by the direct connection of the power
adaptor or the cigar light adaptor to the radio charging jack. This direct
charging normally require more than 15 hours for the full charging.
8
TX-1446 plus
1. Power On/Off/Volume control
2. Push-To-Talk (PTT) button
3. UP button
4. DOWN button
5. MODE/VOX button
6. SQUELCH/MONITOR button
Turn the knob clockwise to switch on and increase
the volume and counter-clockwise to decrease the
volume and switch off the radio. The radio will emit a
confirmation tone when it switches on.
Press and hold this button to speak (transmit) and
release the button to hear (receive) messages. You
can only communicate with other PMR446 radios
when the channel and privacy code settings are the
same as yours.
Pressing this button will increase the channel
number. In some modes this button is used to adjust
the function setting.
Pressing this button will decrease the channel
number. In some modes this button is used to adjust
the function setting.
Press this button briefly to activate the function
mode. Press the button again (repeatedly) to step
through the function menu. Press and hold this
button to activate or de-activate the VOX function.
Press this button briefly to activate and de-activate
the squelch level mode. Press and hold this button to
activate or de-activate the MONITOR function.
ENGLISH
5. Radio Controls
1
2
3
4
5
6
7
8
9
Receiver Busy
Icon
Transmit Icon
Dual Watch Icon
VOX Icon
Key Lock Icon
DCS Icon
/ Display
Keytone Icon
Time Out Timer Icon
Monitor Icon
10
11
12
13
14
15
16
17
18
19
Scan Icon
Roger Beep Icon
Battery Icon
Priority Channel Icon
Hi Power Icon
BCLO Icon
Clone Icon
Information Display
Channel Display
CTCSS Icon
/ Display
9
TX-1446 plus
1 2 3 4 5 6 7 8 9 10 11 12
19 13
15
16
14
18
17
ENGLISH
7. SCAN/TONE button
8. KEYPAD LOCK/PRIORITY CHANNEL button
Press this button briefly to activate or de-activate the
scan mode. Press and hold this button to activate or
de-activate the current privacy code (CTCSS/DCS).
Press this button briefly to activate or de-activate the
priority channel mode. Press and hold this button to
activate or de-activate the keypad lock.
6. LCD Display
The PMR446 service which this radio uses shares channels on a
'take turns' basis. This means that other users and groups may be
using any channel and privacy code combination.
To communicate with other PMR446 radios, all units must be
switched to the same channel (8 choices) and privacy code (50
CTCSS and 104 DCS choices). If the combination you have
chosen is already in use please make an alternative selection.
1.Switch on your radio.
2.Check and if necessary change the channel and privacy code
settings (see Function Mode).
3.To speak, hold the radio upright, about 10cm from your mouth
and press the PTT. Speak slowly and clearly towards the
radio. Release the PTT when you finish speaking.
You will hear messages from other radios that are within range
and have the same channel and privacy code setting.
The appropriate icon will appear in the radio display when you
receive or transmit a message.
An up to 3 digit Radio ID can be programmed when the radio is
switched on. You can customise this Radio ID to identify your
radio.
To enter the Radio ID edit mode, switch on the radio whilst
pressing the SCAN button and the MODE button.
1.Press the MODE button to select the first position.
2.Use the UP or DOWN button to change the character.
3.Press the MODE button to select the next letter.
4.Repeat steps 2 and 3 until the ID is complete.
5.Turn off the radio to finish editing.
ENGLISH
7. Basic Radio Operation
8. Radio ID Editing
10
TX-1446 plus
Indice
Lingue:
Altri manuali TTikorea Ricetrasmettitore
