TTS Easi-Speak Pro Manuale utente
™
User Guide
Version 5
Please Read All Instructions Carefully Before Using
Primary ICT Ltd - www.primaryict.co.uk
Easi-Speak PRO User Guide
2
•Please retain these instructions for future reference
•Easi-Speak PRO contains a non-replaceable,
rechargeable battery
•Do not atte pt to re ove the battery
•Do not allow your Easi-Speak PRO to co e into
contact with water or other liquids
•In the event of an electro-static discharge, your
Easi-Speak PRO ay alfunction. In this case, you
ay need to connect to a co puter to reset it
•Warranty is void if the case is opened for any reason
•The warranty does not cover any data loss fro the
unit nor any consequential loss of infor ation
FCC compliance
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID
THE USER AUTHORITY TO OPERATE THE
EQUIPMENT
Primary ICT Ltd - www.primaryict.co.uk
Easi-Speak PRO User Guide
3
NOTE: This equip ent has been tested and found to co ply
with the li its for a Class B digital device, pursuant to Part 15
of the FCC Rules. These li its are designed to provide
reasonable protection against har ful interference in a
residential installation. This equip ent generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, ay cause har ful
interference to radio co unications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equip ent does cause har ful interference to radio or
television reception, which can be deter ined by turning the
equip ent off and on, the user is encouraged to try to correct
the interference by one or ore of the following easures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equip ent and
receiver.
•Connect the equip ent into an outlet on a circuit different
fro that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician
for help
Primary ICT Ltd - www.primaryict.co.uk
Easi-Speak PRO User Guide
4
Know Your Easi-Speak PR
Built
-
in Speaker
Red ‘Record’
B
utton
Microphone
Status LED
Green ‘Play’
Button
4
-
way Rocker
Switch
LCD Screen
On
-
Off Switch
Menu
Button
USB connector
cover
Primary ICT Ltd - www.primaryict.co.uk
Easi-Speak PRO User Guide
5
Easi-Speak Controls
There are two sets of controls which are used to control
the Easi-Speak PRO
Status Record Play / Pause
LED (Red ring) (Green ring)
Status area
Selec
tion
area
Menu key
Vol +
Vol
-
Next
Prev
LCD Screen
4-way Rocker
Primary ICT Ltd - www.primaryict.co.uk
Easi-Speak PRO User Guide
6
Recording & Playing your First Track
•Switch on the Easi-Speak PRO by sliding the On-Off
switch until the Status LED lights Orange (steady or
flashing), indicating it is waiting in standby
•Press and release the Record button (Red ring). After a
second or so, the Status LED will change to Red
indicating it is recording
•Speak or sing clearly into the top of the icrophone
about 15c to 30c away for at least 2 seconds
•The recording can be paused at any ti e by pressing
the Record button briefly. The Status LED will flash
to show the recording has been paused. Si ply press
the Record button again to continue recording
•When you are finished Recording, press the Record
button, and hold for 2 seconds, to stop the recording
and save it as the last track. The Status LED will
change to Orange (steady or flashing)
•Alternatively you can press and hold the Record
button during the whole of the recording and release it
when you have finished recording
•Press the Play button (Green ring) to play your track.
The Status LED will light Green while the track is
playing
Primary ICT Ltd - www.primaryict.co.uk
Easi-Speak PRO User Guide
7
•When the track is finished, Easi-Speak PRO will
return to standby and the Status LED will be Orange
•The Easi-Speak PRO will not store recordings of less
than 2 seconds, so ensure you record for longer than
this
•Please note that the Easi-Speak Pro can only store a
axi u of sixty two tracks, regardless of the length
of track.
Recording & Playback Modes
Easi-Speak Pro can record and playback files in two
for ats: MP3 or WAV files. Depending on your
application, you ay want to use one of these for ats
rather than another. For instance, uch podcasting is
done using MP3 files so this would be the best for at if
you wanted to ake podcasts. For infor ation on
recording lengths for both for ats see page 15.
.
Status LED
The Status LED provides you with a clear indication of
what is happening with your Easi-Speak Pro. Please take
note of the following infor ation so that you can get
the best results.
•Flashing Orange: Ready to Play/Record MP3 file
Primary ICT Ltd - www.primaryict.co.uk
Easi-Speak PRO User Guide
8
•Steady Orange: Ready to Play/Record WAV file
•Steady Green: Playing (or fully charged)
•Flashing Green: Playing Paused
•Steady Red: Recording
•Flashing Red: Recording Paused
•Flashing Red/Green: Charging
•Flashing Orange/Green: Battery low
Pausing or Stopping a Track
•Press the Play button (Green ring) to play a track. The
Status LED will shine steady Green
•Press the Play button again to pause the track at the
current place. The status LED will flash Green
•Press the Play button again to resu e playback
•To stop a playing track co pletely, press and hold the
Play button for 2 seconds
Fast Forward & Reverse
•While a track is Playing or Paused…
•Press and hold the Prev(ious) or Next track button on
the 4-way rocker switch
Primary ICT Ltd - www.primaryict.co.uk
Easi-Speak PRO User Guide
9
•The Status LED will flash Green and will ove within
the current track at a fast rate
•When the button is released, Play or Pause will
continue at the new position within the track
•The Play position will not pass beyond the start or end
of the current track
Moving Between Tracks
•While a track is Playing or Paused…
•Press the Prev(ious) or Next track button on the
4-way rocker to ove to the selected track
Charging the Battery
Easi-Speak PRO is supplied with a partially charged
battery and can be used i ediately without charging
first. The battery can be charged by connecting to the
USB port of an active co puter or the charger. No
software is required:
•Connect Easi-Speak PRO to the USB port or charger
•The Status LED will flash Red and Green (or Orange
if connected to the separate charger)
•When Easi-Speak PRO is fully charged the Status
LED will change to steady Green
Primary ICT Ltd - www.primaryict.co.uk
Easi-Speak PRO User Guide
10
•A co plete charge of a fully discharged battery will
take about 4 hours
Using the Menu System
The LCD on the Easi-Speak PRO provides a ulti-level
enu syste that allows you to select certain
configurations, anage the sound files and select
recording and playback functions.
The display co prises two separate parts: the status area
at the top in Yellow and the selection area at the botto
in Blue.
Standby Screen
The Standby screen is the
first screen shown when
the Easi-Speak PRO is
switched on. The status
shown here is:
active track is nu ber 1 out of 7 tracks
repeat ode setting is repeat
record/playback ode is MP3
volu e is set to 17
battery is fully charged
Primary ICT Ltd - www.primaryict.co.uk
Altri manuali per Easi-Speak Pro
1
Indice
Altri manuali TTS Microfono
