RZ2 BioAmp Processor Operator’s Manual
5
Maintaining the RZ2
Safety Notices
This device has passed rigorous testing by Underwriters Laboratories and is UL compliant for
CAT II installation in laboratories and other indoor environments. Before applying power to the
RZ2 chassis, verify that the correct safety precautions are taken.
WARNINGS! Read the following warnings prior to operation.
➢If the device is damaged, or fails to operate according to the specifications described in
this manual, disconnect the power cord and contact TDT support immediately.
➢The mains disconnect for the device is the power cord. To completely disconnect power
to the device, the power cord must be disconnected.
➢The power cord is to be readily accessible after installation and during operation.
➢Before applying power to the device, you must correctly connect the power cord to a
properly rated standard socket outlet provided with a protective earth contact.
➢In the event of impaired ground protection, avoid using the device to prevent possible
damage.
➢When removing the power cord from either the power supply or socket outlet, grasp the
plug, not the cord, in order to avoid damaging the cable.
➢Do not attempt to disassemble the power supply or chassis by removing any of the
exterior housing of the RZ2. If you experience any issues, contact TDT support
immediately.
➢Do not attempt to alter this device in any way that deviates from its intended operation as
described in this operator’s manual.
➢Capacitors contained inside the device may retain their charge even after power has been
disconnected from its supply source.
➢Operation of this device in the presence of flammable gases or fumes is strictly prohibited
to avoid definite safety hazards.
➢Do not subject this device to excessive vibration or shocks during handling or shipping,
and avoid dropping the device.
➢Although there is a protective screen over the ventilation fan, do not attempt to stick any
objects into the fan. This may result in injury or damage to the device.
➢Do not attempt to store this device where it may be exposed to prolonged periods of
excessive sunlight, high temperatures, high humidity, or condensation. If exposed to such
conditions, the device may no longer work properly and its specifications may no longer
be satisfied.
➢The device is for indoor use only and is not waterproof; do not get the device wet.
➢Do not attempt to use this device in a manner unspecified by TDT.
