tufin T-800 Manuale utente
T-800/1200 Quick Start Guide
Version 13.11
Table of Contents
Table of Contents 2
Chapter 1: Introduction 3
Welcome 3
Overview 3
Chapter 2: The T-800/1200 Front and Rear Panels 4
Front Panel 4
Front Panel LEDs and Buttons 4
Rear Panel 6
Chapter 3: Setting Up The T-800/1200 7
Power up and Connect to the Network 7
Advanced CLI Configuration 7
Chapter 4: Installing and Configuring Tufin Orchestration Suite Classic 8
Install Tufin Orchestration Suite Classic 8
Configure SecureTrack 8
Configure SecureChange 11
Chapter 5: Installing and Configuring Tufin Orchestration Suite Aurora 13
Network Requirements for Tufin Orchestration Suite Aurora 13
Install Tufin Orchestration Suite Aurora 13
Configure SecureTrack 15
Configure SecureChange 16
Chapter 6: Setting up the Remote Management Module 18
Prerequisites for Remote Computer 18
Ports 18
Configure RMM Using BIOS 18
Configure RMM Using SSH or a Console 19
Installing TufinOS 20
Chapter 7: Restoring Factory Defaults 21
The Next Step 22
Support 22
Tufin at a Glance 22
Trademarks 22
T-800/1200 Quick Start Guide
Table of Contents
Copyright 2003-2021, Tufin Software Technologies Ltd. 2
Chapter 1: Introduction
Welcome
Congratulations on choosing the T-800/1200 Appliance from Tufin Technologies, the industry’s most comprehensive Security Policy Orchestration
solution. Our worldwide technical services team is available to you through the web, email, or telephone. See http://www.tufin.com/support for your
preferred mode of communication. We look forward to supporting all of your current and future firewall operation’s needs.
Overview
Information in this guide applies to the T-800 and the T-1200 appliances.
The new T-Series Appliances are a Tufin-in-a-box solution that provides IT organizations with a quick, robust installation that lowers total cost of
ownership. T-Series Appliances are designed to support both Tufin Orchestration Suite Classic (default) and Aurora. You can choose which
product to install.
Using distributed deployment architecture, Tufin’s T-Series Appliances enable virtually unlimited scalability – multiple appliances can be connected
on-demand at multiple sites, according to network needs. With enterprise-grade memory and SSD drives, the T-Series combines power and
flexibility in several models to scale to the needs of mid-size to large enterprises and ensure optimal performance for your organization.
The T-Series Appliances come pre-installed with TufinOS and are designed to support both Tufin Orchestration Suite Classic (default) and Aurora.
You will need to choose the desired Tufin Orchestration Suite product and install it using the instructions provided in this document.
When setting up the appliance, we recommend that you also configure the Remote Management Module (RMM). With this module you can install
newer versions of TufinOS on the appliance without having to physically access the server.
All Tufin Appliances are rigorously lab-tested by our network security experts.
This document provides:
lShipping container contents, and descriptions of the appliance panels
lA step by step guide to getting the appliance and software up and running
lInstructions for restoring factory defaults
To set up device monitoring by SecureTrack, to configure SecureChange, or for more information about the Tufin Orchestration Suite, see the
Tufin Knowledge Center at https://forum.tufin.com/support/kc/latest (for Classic) or https://forum.tufin.com/support/kc/aurora (for Aurora).
Shipping Container Contents
Item Description
Appliance T-800/1200 appliance
Cables 2 power cables
1 RJ-45 (CAT 5e) network cable
1 DB9 console cable
USB flash drive USB flash drive for appliance recovery
Documentation This Quick Start Guide
Other hardware Rack mounting kit
Appliance front bezel
T-800/1200 Quick Start Guide
Chapter 1: Introduction
Copyright 2003-2021, Tufin Software Technologies Ltd. 3
Chapter 2: The T-800/1200 Front and Rear Panels
These sections describe the different elements in the front and rear panels.
Front Panel
Item Description
A Service/Asset Tag
B Hard drive bay 0
C Hard drive bay 1
D Hard drive bay 2
E Hard drive bay 3
F Hard drive bay 4
G Hard drive bay 5
H Hard drive bay 6
I Hard drive bay 7
J Front panel LEDs and buttons
K 2 USB 3.0 Ports
Front Panel LEDs and Buttons
All control buttons and status LEDs are located on the front of the appliance.
Item Feature Description
A Information
LED
Indicates system status as follows:
lContinuously on and red: An overheat condition has occurred (which may be caused by cable
congestion).
lBlinking red (1Hz): Fan failure, check for an inoperative fan.
lBlinking red (0.25Hz): Power failure, check for a non-operational power supply.
lSolid blue: UID has been activated locally to locate the server in a rack environment.
lBlinking blue: UID has been activated using IPMI to locate the server in a rack environment.
T-800/1200 Quick Start Guide
Chapter 2: The T-800/1200 Front and Rear Panels
Copyright 2003-2021, Tufin Software Technologies Ltd. 4
Item Feature Description
B NIC LED When flashing, indicates network activity on LAN1.
C NIC LED When flashing, indicates network activity on LAN2.
D HDD When flashing, indicates activity on the hard drive.
E Power LED Indicates power is being supplied to the system power supply units. This
LED is illuminated when the system is operating normally.
F UID
button/LED
The unit identification (UID) button turns on or off the blue light function of the Information LED and a blue LED
on the rear of the chassis. These are used to locate the server in large racks.
PWR Power button The main power switch applies or removes primary power from the power supply to the server but maintains
standby power.
T-800/1200 Quick Start Guide
Chapter 2: The T-800/1200 Front and Rear Panels
Copyright 2003-2021, Tufin Software Technologies Ltd. 5
Rear Panel
Item Description Notes
A Power supply 1
B Power supply 2
C LAN 10GB ethernet port 1
D LAN 10GB ethernet port 2
E LAN 10GB ethernet port 3
F LAN 10GB ethernet port 4
G 2 USB 3.0 ports
H IPMI LAN Dedicated IPMI management interface that gives you remote management (“lights-out
management”) of the system.
I Serial port Standard serial port that gives you serial access to the system via console redirection.
J VGA port
K 1 PCI-E 3.0 low profile slot
L 2 PCI-E 3.0, full height, full
length slots
Note: For Tufin Orchestration Suite 2.0 (Aurora), you must use only LAN Ethernet port 1 (C in the figure) for all network
connections.
T-800/1200 Quick Start Guide
Chapter 2: The T-800/1200 Front and Rear Panels
Copyright 2003-2021, Tufin Software Technologies Ltd. 6
Chapter 3: Setting Up The T-800/1200
Power up and Connect to the Network
Note: The appliances have a predefined IP address. Before racking the appliances, make sure to change the IP address either
in the first-time wizard (as described Chapter 4: Configure SecureTrack), or using a console connection (see Advanced CLI
Configuration) in CLI. For CLI instructions, see https://forum.tufin.com/support/kc/latest/Content/Suite/1584.htm.
To power up the appliance and connect it to the network:
1. Connect the power cable.
2. Boot up the appliance by pressing the Power button on the front panel.
3. Connect a network cable to the ethernet port 1 (Chapter 2: Rear Panel, item C) and to a PC (with a crossover cable), or to a local network
that is in the same subnet as the eth0 port. If you have not changed it, the default is 192.168.1.100/24.
Advanced CLI Configuration
You can achieve CLI access using a console connection or SSH access. To use a console connection, configure the terminal to match the
following appliance console port settings:
l57600 bits per second
l8 Data bits
lParity: None
lStop bit: 1
lFlow Control: None
T-800/1200 Quick Start Guide
Chapter 3: Setting Up The T-800/1200
Copyright 2003-2021, Tufin Software Technologies Ltd. 7
Chapter 4: Installing and Configuring Tufin Orchestration
Suite Classic
This section includes instructions to install and configure Tufin Orchestration Suite Classic R21-1 and above running on TufinOS 3.60.
Install Tufin Orchestration Suite Classic
1. Install Tufin Orchestration Suite Classic (SecureTrack and SecureChange/SecureApp):
a. Open a command line via SSH to the IP address of eth0 (if you have not changed it: 192.168.1.100).
b. Log in as tufin-admin with password admin.
You are prompted to change the default password when you first log in.
c. To install Tufin Orchestration Suite Classic, run the following commands:
screen -S install
sudo su –
cd /opt/tufin/data/classic
sh <filename>
The installation file is in /opt/tufin/data/classic.
d. Follow the installation instructions in the command line.
If you disabled SecureTrack and will not be using it on this appliance, skip to Configure SecureChange.
2. (SecureTrack only) Log into SecureTrack:
a. To access SecureTrack with Mozilla Firefox or Google Chrome, browse with HTTPS to the IP address of eth0. If you have not
changed the IP address, browse to: https://192.168.1.100.
b. Accept the certificate.
The login window appears.
c. Log in with these credentials (admin/admin) and click Login.
Configure SecureTrack
After logging into SecureTrack for the first time, the SecureTrack Setup Wizard opens. The wizard includes the following pages:
T-800/1200 Quick Start Guide
Chapter 4: Installing and Configuring Tufin Orchestration Suite Classic
Copyright 2003-2021, Tufin Software Technologies Ltd. 8
lLogin: For security reasons, change the admin password.
lEULA: Read and accept the End User License Agreement.
lPassword: Type system for the Old Password of the TufinOS root user, and change the password.
T-800/1200 Quick Start Guide
Chapter 4: Installing and Configuring Tufin Orchestration Suite Classic
Copyright 2003-2021, Tufin Software Technologies Ltd. 9
lNetworking (optional): Configure networking (DNS settings can also be configured later from SecureTrack's web interface)
lTime: Configure date and time settings.
lUser Details: Configure the admin user’s details. Username and password cannot be changed in this page.
T-800/1200 Quick Start Guide
Chapter 4: Installing and Configuring Tufin Orchestration Suite Classic
Copyright 2003-2021, Tufin Software Technologies Ltd. 10
Altri manuali per T-800
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali tufin Firewall
