Turboair WORKSHOP TA3050 Manuale di installazione

COMPRESSOR

WORKSHOP SERIES

SET UP AND OPERATING INSTRUCTIONS

TA3050 CAST IRON DIRECT DRIVE COMPRESSOR

Read this material before using this product.

Failure to do so can result in injury.

SAVE THIS MANUAL

DIRECT DRIVE COMPRESSOR

CONTENTS

Introduction.................................................3

General Safety Rules...................................4

Specic Safety Rules...................................5

Parts Overview.............................................6

Assembling the Compressor........................7

Checking/Filling the Oil................................7

Pre-start Checklist........................................8

Operating Instructions.................................8

Preventative Maintenance Schedule.........10

Troubleshooting.........................................11

Glossary of Terms.......................................16

Warranty...................................................17

Notes...................................................18

DIRECT DRIVE COMPRESSOR

Congratulations on the purchase of your

TURBO AIR Direct Drive Compressor!

This product is manufactured to high quality standards

and will give you many years of service if you follow the

instructions for use and maintenance in this manual. If you

require any help with your product, whether it is a warranty

claim, spare part or user information, please visit www.

euroquip.co.nz rst and register your product online.

Once registered, please log a request online or call us on

0800 387 678. Your new Turbo Air compressor has been

manufactured under stringent AS/NZS Quality Standards to

meet superior performance criteria.

COMPRESSOR USAGE

This compressor has been designed for home workshop use and

ideal for the many tasks around home and in the shed that are

so much easier and quicker using the power and convenience of

compressed air.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as

waste. All tools, hoses and packaging should be sorted, taken to

the local recycling centre and disposed of in an environmentally

safe way.

DESCRIPTION OF SYMBOLS

The rating plate on your tool may show symbols. These represent

important information about the product or instruction on it’s use.

Wear hearing protection

Wear eye protection

Wear breathing protection

Conforms to relevant standards for

electromagnetic compatibility.

INTRODUCTION

SPECIFICATIONS:

• Powerful3.0HPInductionMotor

Designed for Aus / NZ conditions

• CastIronV-TwinPump

Super duty

• Large50LTankCapacity

Provides volume for high air demand applications

• 8Bar(115psi)

High pressure air delivery

• TwinOutletswithPressureRegulator

Includes 2 x quick release couplers

• HighCapacity300L/minFAD

(Free air delivery)

MODEL: TA3050

POWER: 3.0HP / 2250W

VOLTAGE: 230V~50Hz

NO LOAD SPEED: 2850rpm

CURRENT: 10A

MAX. OUTPUT: 360L/min, 12.7cfm

TANK CAPACITY: 50L

AIR OUTLET: 6.35mm (1/4”)

ARO Coupler x 2

CUT IN PRESSURE: 0.6Mpa (Factory Set)

MAX. OUTPUT PRESSURE: 0.8MPA (115psi)

FREE AIR DELIVERY: 300L/min

DIMENSIONS: 760 x 380 x 740mm (LxWxH)

WEIGHT: 37kg

CAUTION!

Carefully read through this entire instruction manual before

using your new compressor. Take special care to heed the

cautions and warnings. Your Iron Horse Compressor has

many features that will make your job faster and easier.

Safety, performance and dependability have been given top

priority in the development of this machine, making it easy

to maintain and operate.

DIRECT DRIVE COMPRESSOR

GENERAL SAFETY RULES

WARNING!

Read and understand all instructions. Failure to follow all

instructions listed below may result in electric shock, re,

and/or seriouis personal injury.

DIRECT DRIVE COMPRESSOR

SPECIFIC SAFETY RULES

DIRECT DRIVE COMPRESSOR

PARTS OVERVIEW

1. Compressor Pump

2. On / Off Pressure Switch

3. Safety Valve

4. Pressure Regulator

5. Regulator Gauge

6. Tank Gauge

7. Air Tank

8. Non Return Valve

9. Drain Valve

10. Electric Motor

11. Air Filters

DIRECT DRIVE COMPRESSOR

ASSEMBLINGTHECOMPRESSOR

This air compressor requires some minor assemble before it can

be used. Locate the accessory pack. It should contain:

• WheelsandAxleSet

• RubberStopper

• AirFilter

• OilBreatherPlug

• ABottleofOil

1. Fit the wheels to

the unit using the axle

kit provided and insert

the rubber stopper into the

spigot on the bottom of the tank.

2. Fit the air lter to the

cylinder head.

3. Locate the plastic dust plug

in the oil breather hole and

remove it to expose the oil

breather hole.

1. Always check the oil

level in the pump before

use. When lling, ll the oil

from the oil breather hole

until the oil reaches the red

mark on the sight glass.

RecommendedCompressorOil:

Use SAE30 for temperatures over 10oand use SAE10 below 10o.

NOTE: The oil must be changed after the rst 10 hrs of operation

then every 20 hrs thereafter.

CHECKING/FILLINGTHEOIL

WARNING!

This unit is shipped with oil in the compressor pump. Oil

must be added to the unit prior to operating.

2. Check that the small hole

in the top of the breather

pipe is clear and then

insert it into the oil ller

hole.

DIRECT DRIVE COMPRESSOR

PRE-STARTCHECKLIST

• Ensure the unit is stable in a well-ventilated dry position.

• Ensure that the drain valve is closed and all air outlets are

closed.

• Connect the power lead to the mains.

• Start the compressor by pulling on the red knob.

• Check for air leaks.

NOTE: Output ttings may differ from those shown

OPERATING INSTRUCTIONS

The pressure in the tank is controlled by the action of the pressure

switch located under the pressure switch cover.

When the set maximum pressure is reached the pressure switch

activates and the motor is turned off. The pressure will then de-

crease as the air is used until the set minimum is reached after

which the pressure switch turns the motor on again.

The operator of the compressor should be well aware that during

use of the compressor the motor will cycle (start and stop) under

the inuence of the rising or falling pressure in the tank and the

motor will start without any warning.The maximum and minimum

pressures are factory set and should not be altered.

You can utilize either the direct outlet and/or the regulated outlet.

The pressure of the regulated outlet can be changed by turning the

control knob. Rotate the knob clockwise to increase pressure and

anti-clockwise to decrease.

EACHTIMEYOUUSETHECOMPRESSOR

Please read the owners manual thoroughly. Make sure that you

completely understand all of the safety warnings, system controls

and instructions provided before attempting to operate this air

compressor. Every effort has been made to provide you with the

information needed to obtain many years of reliable and trouble-

free service out of your new air compressor. It is your responsibility

to operate the air compressor properly. To obtain the longest pos-

sible service life from your compressor you must always keep the

following instructions in mind:

WARNING!

Use the red knob to turn the unit on and off, not the mains

switch. Turning the unit on and off from the mains only will

result in damage to the motor. Regulator Gauge

Safety Valve

Tank Gauge

Air Outlet

Pressure Regulator

Turn Off

Turn On

DIRECT DRIVE COMPRESSOR

ALWAYSMAKESUREYOU:

DIRECT DRIVE COMPRESSOR

10.

PREVENTATIVEMAINTENANCESCHEDULE

WARNING!

Before maintenance operation, stop the air compressor, disconnect the unit from the mains supply and discharge

all air in the air tank.

IMPORTANT! The pump oil must be changed after the rst 10 hours of operation. This

will remove contaminants contained in the crankcase due to break-in Recommended

Compressor Oil: Use SAE30 for temperatures over 10oC and use SAE10 below 10oC.

Indice

Altri manuali Turboair compressore d'aria

Turboair

Turboair TA1500 Manuale utente

Manuali compressore d'aria popolari di altre marche

Sparmax

Sparmax DC-25XR Manuale utente

KAESER

KAESER M122 Manuale utente

GMC

GMC GAC1500 Manuale utente

Briggs & Stratton

Briggs & Stratton Air Compressor Manuale utente

Fini

Fini F3GST2TK Manuale utente

Industrial Air

Industrial Air CP1580325 Manuale di programmazione

Campbell Hausfeld

Campbell Hausfeld RP3300 Guida rapida

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuale utente

Hitachi

Hitachi EC99S Manuale dell'operatore

Parkside

Parkside PKO 270 A1 Manuale utente

Sullair

Sullair 185 Manuale utente

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuale utente

Ferm

Ferm CRM1046 Manuale utente

BE AC153 Manuale utente

RIDGID

RIDGID OF25150A Manuale utente

Johnson Controls

Johnson Controls QUANTUM LX Manuale

Sears

Sears Craftsman 919.167463 Manuale utente

Ring Automotive

Ring Automotive RAC700 Manuale utente