Turbolock TL-100 Manuale utente
In order to continue serving our customers and providing the best products, our
product information including our user manuals may receive updates from time to
time. Please check our website for the latest user manuals and product materials. Ver. 1.0 6/15/17
www.turbolock.com
Customer Service: 855-850-8031
TM
Section 1
Information & Safety Warnings 4
1.1 Introduction 4
1.2 Safety Warnings 4
1.3 Disposal at End-of-Life 5
Section 2
Package Contents & Overview 6
2.1 Contents 6
2.2 Overview 7
Section 3
Installation 8
3.1 Step by Step 8
3.2 Battery Information 14
Section 4
How to Use the TurboLock 14
Using the Admin Password 14
Using the Micro USB Port 14
Using a MIFI Card 15
Using a User Password 15
Passive Function 15
Section 5
Using the Admin Password 15
5.1 Information 15
5.2 Changing the Admin Password 15
Section 6
Using the MIFI Cards 16
Adding a Card 16
Deleting a Card 17
Deleting all Cards 17
Section 7
Using Passive Function 18
Turning on the Passive Function 18
Turning o the Passive Function 18
Section 8
Using the Mute Function 18
Muting 18
Un-muting 19
Section 9
The Turbolock App 19
9.1 Installation 19
9.2 Pairing 20
Section 10
Resetting the Lock 21
Section 11
Maintenance 22
Section 12
Troubleshooting 23
Section 13
Warranty 25
13.1 Violation 25
13.2 Information 26
Table of Contents
4TurboLock TL - 100
Section 1
Information & Safety Warnings
1.1 Introduction
This user manual will guide you through the functions and usage of your TurboLock TL-100 Smartlock. It is important that you follow
all instructions and regard all notes that appear throughout this manual. Consult this manual before you attempt to use your lock. If
you have questions not answered by this manual or are in need of repair or non-routine service, contact customer service at 855-
850-8031. Before contacting customer service, please have your purchase information ready as this may be needed during the call.
This information may be recorded below.
Date of Purchase:
Place of Purchase:
1.2 Safety Warnings
When reading this manual, note these icons:
Notes with this icon MUST be read, understood, and obeyed to prevent injury or damage etc.
Notes with this icon include relevant information.
Overall Usage
• Never insert objects into the lock other than batteries as described in this manual.
• The lock is not a toy. Do not leave children unsupervised around the lock.
• Verify that all parts of the lock are accounted for. If any part is missing, contact customer service.
• The lock is best suited for standard doors made for buildings within the US.
• Use only the parts included in the original packaging or received from TurboLock.
TurboLock TL - 100 5
• Replace the batteries after receiving the lock’s low battery notication.
• Only use clean water, mild cleaner, and soft, non-abrasive cloth when cleaning.
• Never submerge the lock or any of the lock’s components.
• Never apply any cleaner directly to any part of the lock.
• Do not let water and liquids get into the lock’s electric parts or battery compartment.
• Objects should not be hung from the lock’s handles at any time.
• Installation surfaces must be level. Do not install on doors or surfaces with any type of deformity as gaps or warping may cause
the lock to malfunction or fail to operate entirely.
• Old and new batteries as well as batteries from dierent brands may not be mixed.
• Use only four alkaline AA batteries.
• Use the lock only as described in this user manual.
• If the battery compartment or surrounding parts are damaged, do not use the lock.
1.3 Disposal at End-of-Life
This product must not be disposed of by incineration, landlling, or mixing with household trash. Improper disposal of the battery
contained within this product may result in the battery heating up, rupturing, or igniting which may cause serious injury. The
substances contained inside the battery present chemical risks to the environment. The recommended disposal for any TurboLock
TL-100 Smartlock at its end-of-life is to dispose of the entire unit at or through an e-waste recycling center, program, or facility.
Local regulations and laws pertaining to the recycling and disposal of lithium ion batteries and/or products containing them will
vary according to country, state, and local governments. You must check laws and regulations corresponding to where you live in
order to properly dispose of the battery and/or unit. It is the user’s responsibility to dispose of their waste equipment properly with
accordance with local regulations and laws.
For additional information about where you should drop o your batteries and electrical or electronic waste, please contact your local
or regional waste-management oce, your household waste disposal service, or your point-of-sale.
6TurboLock TL - 100
Section 2
Package Contents & Overview
2.1 Contents
Inside Section 1x
Outside Section 1x
BMHA Latch 1x
Adjustable Latch 1x
MIFI Cards 2x
Latch Screws 2x
Strike Screws 2x
Inside Screws 4x
Pegs 4x
Back Screws 3x
Spring 1x
Latch Pin 2x
To purchase additional keycards,
visit www.turbolock.com.
Latch & Strike Plates
Battery Compartment
(Batteries not included.)
Reset Button
Battery Cover
Outside Section Inside Section
MIFI Cards
Inside Screws
Latch Pin
Spring
Back Screws
Latch Screws Strike ScrewsPegsLatch Assembly
TurboLock TL - 100 7
2.2 Overview
See the next section for installation information.
Keypad
Outside Section
(Front View)
Outside Section
(Back View)
Micro USB Port
Handles
Button
Peg Openings
8TurboLock TL - 100
Section 3
Installation
3.1 Step by Step
• The following installation instructions were made in reference to a door which did not already have a handle opening. If
switching out an existing handle, it may be possible to skip some steps.
• For ease of installation, it is recommended to perform installation with the assistance of another person.
• After nishing installation, be sure to use the door at least once to make sure all parts of the lock function correctly.
KEEP DOOR AJAR. At all times during, before, and shortly after installation, keep the door open. If the lock is incomplete or
improperly installed, and the door is then closed, the lock and/or door may become stuck.
Pre-Installation
If installing the TL-100 on a new door without a hole cut for the door handle, follow the instructions below. If retrotting the TL-
100 to an existing hole, measure the diameter and continue to Part 2.
Part 1
Step 1. Marking the Door
Using the template, mark a hole on both sides of
the door at required backset, then mark the latch
hole on door edge.
Step 2. Drilling Holes
Bore a 54mm hole on door face, then drill a
25mm hole in the door edge to intersect with center of 54mm hole.
Drill a 54mm hole from both sides of door to stop wood splintering.
TurboLock TL - 100 9
Step 3. Installing the Latch
• Insert the latch into the hole, mark a line around edge of latch plate to use as a guide, and remove latch. (Fig. 3a)
• Chisel approx. 3mm deep or until latch plate sits ush with door edge. (Fig. 3b)
• Insert the latch ensuring the rounded side faces out towards the front of door, drill 2x 3mm holes for and fasten the
latch with the 2x latch screws. (Fig. 3c)
Step 4. Installing the Strike
• Push the door until nearly closed and mark the horizontal center of the latch on the
door frame. Mark the vertical line where the door edge meets the frame and measure
in half of the door’s thickness to nd the vertical center. (Fig. 4a)
• Extend both lines until they intersect and drill a 25mm hole to 15mm depth.
• Position the strike plate and mark around the edge.
• Chisel the frame to approx. 1.5mm depth or until the strike sits ush.
• Drill 2x 3mm screw holes and x the strike to the frame with the 2x strike screws.
(Fig. 4b)
(Fig. 3a)
(Fig. 4a)
(Fig. 4b)
(Fig. 3b) (Fig. 3c)
10 TurboLock TL - 100
Part 2
Step 5. Installing the Pegs (Fig. 5a)
• Retrieve the outside section of the lock and look at the back.
• Locate the four holes around the interior of the lock and
screw in the 4x pegs.
Step 6. Outside Handle Positioning
• Retrieve the outside section of the lock and look for the
arrow engraving on the back. (Fig. 6a)
• Push the button on the bottom and turn the handle to the
desired orientation. (Fig. 6b)
• Use the square latch pin to turn the center so that the arrow
is pointing up. (Fig. 6c)
• Remove the latch pin.
(Fig. 6a) (Fig. 6b) (Fig. 6c)
(Fig. 5a)
Button
Latch Pin
Altri manuali per TL-100
1
Indice
Altri manuali Turbolock Serratura
Turbolock
Turbolock tl-200 Manuale utente
Turbolock
Turbolock TL-400KBL Manuale utente
Turbolock
Turbolock TL111PRO Manuale utente
Turbolock
Turbolock TL117 Manuale utente
Turbolock
Turbolock TL114 Manuale utente
Turbolock
Turbolock TL116 Manuale utente
Turbolock
Turbolock TurboSafe Manuale utente
Turbolock
Turbolock TL-400KBL Manuale utente
Turbolock
Turbolock TL117 Manuale utente
Turbolock
Turbolock TL88 Manuale utente
