Turck 6870375 Manuale utente

Flow monitoring

Immersion sensor without integrated processor

FCS-G1/2A4-NAEX0-H1141/L065

Edition • 2014-06-17T22:21:51+02:00

1 / 2 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

Type code FCS-G1/2A4-NAEX0-H1141/L065

Ident no. 6870375

Mounting conditions insertion style sensor

Water Operating Range 1…100cm/s

Oil Operating Range 3…200 cm/s

Stand-by time typ. 8 s (2…18 s)

Switch-on time typ. 2 s (1…13 s)

Switch-off time typ. 2 s (1…15 s)

Temperature jump, response time max. 12 s

Temperature gradient ð 250 K/min

Medium temperature - 20…60 °C

Device designation É II 1/2 G EEx ia IIC T6

Protection type Ex ia IIC

PowerPið 0.69 W

Internal inductances/capacitances negligibly small

Ex approval acc. to conformity certificate TÜV 99 ATEX 1517X

Protection class IP67

Housing material stainless steel, V4A (1.4571)

Sensor material stainless steel, AISI 316Ti

Max. tightening torque housing nut 100 Nm

Connection male, M12 x 1

Pressure resistance 60 bar

Process connection G ½″

■ATEX category II 1/2 G, Ex zone 0

■Intrinsically safe flow sensor for liquid

media

■Calorimetric principle

■Adjustment via potentiometer at Ex sig-

nal processor

■Status indicated via LED chain on sig-

nal processor

■Sensor length 65 mm

■Intrinsically safe EEx ia IIC T6, for use

in zone 0

■Plug-in device, M12 x 1

■4-wire connection to an Ex0 processor

Wiring diagram

Functional principle

Our insertion - flow sensors operate on the

principle of thermodynamics. The measur-

ing probe is heated by several °C as against

the flow medium. When fluid moves along the

probe, the heat generated in the probe is dis-

sipated. The resulting temperature is mea-

sured and compared to the medium tempera-

ture. The flow status of every medium can be

derived from the evaluated temperature differ-

ence. Thus TURCK's wear-free flow sensors

reliably monitor the flow of gaseous and liquid

media.

Flow monitoring

Immersion sensor without integrated processor

FCS-G1/2A4-NAEX0-H1141/L065

Edition • 2014-06-17T22:21:51+02:00

2 / 2 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

Operating manual

Intended use

This device fulfils the directive 94/9/EC and is suited for use in explosion hazardous areas according to EN50014, EN50020 and EN50284.

For use in explosion hazardous areas conform to classification

II 1 G (Group II, Category 1 G, electrical equipment for gaseous atmospheres).

Marking (see device or technical data sheet)

É II 1/2 G and EEx ia IIC T6 acc.to EN50020 and EN50284

Installation / Commissioning

These devices may only be installed, connected and operated by trained and qualified staff. Qualified staff must have knowledge of protection

classes, directives and regulations concerning electrical equipment designed for use in explosion hazardous areas.

Please verify that the classification and the marking on the device comply with the actual application conditions.

This device is only suited for connection to approved EExi circuits acc. to EN500014 and EN50020. Please observe the maximum admissible

electrical values.

After connection to other circuits the sensor may no longer be used in EExi installations. When interconnected to (associated) electrical equip-

ment, it is required to perform the "Proof of intrinsic safety" (EN60079-14).

Installation and mounting instructions

Avoid static charging of cables and plastic devices. Please only clean the device with a damp cloth. Do not install the device in a dust flow and

avoid build-up of dust deposits on the device.

If the devices and the cable could be subject to mechanical damage, they must be protected accordingly. They must also be shielded against

strong electro-magnetic fields.

In order to avoid contamination of the device, please remove possible blanking plugs of the cable glands or connectors only shortly before in-

serting the cable or opening the cable socket.

service / maintenance

Repairs are not possible. The approval expires if the device is repaired or modified by a person other than the manufacturer. The most important

data from the approval are listed.

Questo manuale è adatto per i seguenti modelli

Altri manuali turck Accessori

turck

turck FCS-G1/2HC4-NAEX0/L065 Manuale utente

turck

turck RU130U-M18E-LI8X2-H1151 Manuale utente

turck

turck NCLS Series Manuale utente

turck

turck BI1.5-HS865-Y1 Manuale utente

turck

turck FCS-G1/2A4-NAEX/D100 Manuale utente

turck

turck BC3-M12-AP6X 15M Manuale utente

turck

turck RU600 Series Manuale utente

turck

turck LRS510 Serius Manuale utente

turck

turck BI10-G30-Y2X 7M Manuale utente

turck

turck Li-Q25LxE Series Manuale utente

turck

turck FCS-G3/4A4-NAEX0-H1141 Manuale utente

turck

turck RU40U-M18MS-AP8X2-H1151 Manuale utente

turck

turck FCS-G1/2A4-NAEX0 Manuale utente

turck

turck PK01VR P Series Manuale di istruzioni

turck

turck LI-Q25L-IOLX3 Series Manuale utente

turck

turck RU100-CP40 Series Manuale utente

turck

turck FCS-G1/4A4-NAEX/D100 Manuale utente

turck

turck NI5-EM12-Y1X-H1141 Manuale utente

turck

turck FS100 L Series Manuale utente

turck

turck BCT Series Manuale utente

turck

turck FCS-G1/2HC22-NAEX/D100 5M Manuale utente

turck

turck RU40U/3GD Series Manuale utente

turck

turck RU40-M18 Series Manuale utente

turck

turck FCS-GL1/2T-NAEX-H1141 Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuale utente

turck 6870375 Manuale utente

Manuali Accessori popolari di altre marche