TUYA Snap 11S Manuale utente
QUICK GUIDE
ORIGINALITY DESIGN SMART - AND BEAUTIFUL
BATTERY CAM
Snap 11S
1
Snap 11S
Screws(2 packages)
User manual
Bracket (B)
Power adapter
Please consult this checklist for all parts.
What's in the box
USB cable
Bracket (A)
2
Reset
SD card slot
Power button
Micro USB
Charging indicator
Microphone
PIR
Status light
Lens
Photosensitive
Speaker
Power port
Power on/off
Status light
DC 5V±10%
Press the button for 3 seconds to turn on/off the camera
Solid red light on: the camera is turning on or malfunctional
Blinking red light: awaiting WiFi connection (slowly blinking)
connecting the WiFi (quickly blinking)
Blinking blue light: currently connecting
Solid blue light on: the camera runs correctly
Support local SD card storage (Max.128G)
Press and hold on for 5 seconds to reset the camera
Reset
SD card slot
Solid red indicator on: battery is charging
Solid blue indicator on: charging completed
Charging
indicator
Battery capacity 9000mAh (two 21700 lithium-ion batteries)
3
Mode 1 Bracket (A) Installation
Mode 2 Bracket (B) Installation
Install
2.Install the camera in the bracket and lock it with the screw
1.Fix the bracket on the wall
1.Fix the bracket on the wall with screws
2.Bring the camera closer to the bracket
0~90°
0~360°
After ajusting your camera angle,
please lock this screw
4
Download
Smart Life is available for both iOS and Android OS. Rearch the name 'Smart
Life'in App Store or Android Market, or scan the QR-Code to download the
App.
Set up router
The router supports the 2.4GHz WiFi (doesn't support the 5GHz).Before
connecting to the WiFi network,please set the parameters of the router,
and record the SSID and password of your WiFi.
Android
IOS
·Support
Download App(IOS&android)
Connect
2.4GHz 5GHz
Please keep network available
5
Registration process
Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy"
and click "Agree" .
Step 2
Input a legal and valid Mobile number or Email address and click
"Continue". Input Verification Code, then log in the app.
6
QR Code Configuration
Open the Smart Life App, click "Create family", and you can customize
the Family name and related settings.
1
Continue to click "Security & Sensor" >> "Smart Camera", and then
choose" Add Device" or "+", ready to add camera.
2
7
In "Add Device" this interface,continue to click "next step", and then you
should input your WiFi's passwords.
3
Note:
1) Camera only supports 2.4GHz WiFi network.
2) The number of bits in the ssid and passwords of the router
should not exceed 24 digits.
8
In this interface, you should scan the QR code in your phone with the
camera, when the camera comes out "dong dong dong". And you can
complete the configuration about 30s.
4
9
When connecting, you should make sure your router, mobile,and camera
are as close as possible. When camera added successffully, click " "
you could also DIY the camera's name.
5
Indice
Altri manuali TUYA Macchina fotografica digitale
