TW Audio BLS Manuale utente
Assembly
Instructions
BLS
Assembly Instructions BLS
2
Introduction
The BLS Boxlink connector set is an accessory part for products of the VERA10, VERA20
and VERA36 series.
It is characterized by a subtle look, a remarkable size to weight ratio and ease of use.
Instructions in this setup manual
NOTE
TIP
CAUTION
WARNING
Thank you for choosing a high-quality product “MADE IN GERMANY” from the brand
TW AUDiO.
If you lend your product to another party, inform that party of the safety-related operating pro-
cedures and hand over this assembly guide. If you require additional copies of this manual,
you can obtain them free of charge from TW AUDiO or download them from www.twaudio.de
Strictly adhere to the instructions contained in this operating manual that are marked as
follows:
This symbol in combination with the signal word “Warning” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to serious injury or even death.
This symbol in combination with the signal word “Caution” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to light or moderate injury.
This symbol in combination with the signal word “Note” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to product damage.
This symbol in combination with the signal word “Tip” identifies additional information or
notes that will simplify working with TWAUDiO products on the basis of practical experience.
Assembly Instructions BLS
3
Notes on the products
Read manual
before use!
Before using the boxlink connector set, carefully read the assembly instructions and keep the
instructions in a safe place together with the BLS boxlink connector set.
General Information
Assembly Guide: OM-BLS
Version 2.1 d, 03/2023
© by TWAMBO 2023; all rights reserved.
All information contained in this operating manual was correct to the best of our knowledge
at the time of printing.
Quality warranties or assurance of suitability for a certain type of use based on the technical
specifications, dimensions and weights are not granted by TWAMBO.
TWAMBO also shall not assume liability for any secondary damage (property damage and/or
personal injury) nor for the failure to comply with this operating manual!
TWAMBO reserves the right to update this document based on recent developments.
TWAMBO GmbH
Karl-Hofer-Str. 42
14163 Berlin
Germany
Phone : + 49 (0) 71 41-48 89 89 0
Fax: + 49 (0) 71 41-48 89 89 99
WWW: www.twaudio.de
Assembly Instructions BLS
4
Table of contents
1. Safety | Intended use...................................................................................................... 5
2. Overview ........................................................................................................................ 7
2.1 Components ........................................................................................................... 7
3. Technical specifications .................................................................................................. 8
3.1 Data sheet............................................................................................................... 8
4. Commissioning............................................................................................................... 9
4.1 Use of Boxlink connectors A and B ......................................................................... 9
4.2 System setup with boxlink connector .................................................................... 10
4.3 System setup with curved loudspeakers................................................................ 11
5. Transport and Storage.................................................................................................. 14
6. CE Declaration of Conformity........................................................................................ 15
7. Disposal ....................................................................................................................... 15
Assembly Instructions BLS
5
1. Safety | Intended use
The BLS boxlink connector set was developed for use in professional sound systems. The
outrigger may only be used by trained and qualified personnel.
Before each installation, check the integrity of the BLS boxlink connector set and ensure that
all components are in perfect condition.
The scope of delivery includes specified quick-lock pins. Only use this quick-lock pins.
WARNING
The BLS boxlink connector set must only be used with products of the VERA10, VERA20
and VERA36 series.
These assembly instructions describe how to use the BLS boxlink connector set. Any other
use shall be deemed improper and may result in damage or even injury.
Modifications or alterations to individual parts of the BLS boxlink connector set are not per-
mitted! Danger to life!
WARNING
At each system setup, check that all quick-lock pins are always completely inserted! All quick-
lock pins must always be used!
WARNING
The BLS is an accessory designed both for indoor and outdoor use.
CAUTION
The BLS boxlink connector set may only be used by trained and qualified personnel. Personnel
must check the BLS for its full suitability before each use.
WARNING
When visible damage to any part of the BLS boxlink connector set is detected, it must be
decommissioned immediately.
WARNING
Please adhere to the following safety instructions to avoid risks when using accessories.
Note the operating modes described in this assembly instructions. Other uses are not per-
missible.
Damage caused by improper use is not covered by TWAMBO.
Assembly Instructions BLS
6
The payload of each boxlink (A und B) is designed of 0,5 to [1102 lbs]. Do not exceed this
payload!
WARNING
Assembly Instructions BLS
7
2. Overview
2.1 Components
1. 2x boxlink B - surface KTL-coated as well as colorless-powder-coated
2. 2x boxlink A - surface KTL-coated as well as colorless-powder-coated
3. Captive quick-lock pins
Figure 2.1 - Overview
2
1
3
3
Assembly Instructions BLS
8
3. Technical specifications
3.1 Data sheet
maximum load capacity per Boxlink: 0,5 to [1102 lbs] (1 to WLL) [2204lbs]
Dimensions (h x w x d) 4x 102 x 26 x 52 mm [4,02 x 1,02 x 2,05in]
Weight Total: 0.85 kg [1,88 lbs]
Surface KTL-coated as well as colorless-powder-coated
Assembly Instructions BLS
9
4. Commissioning
4.1 Use of Boxlink connectors A and B
All boxlink connectors are provided with the notice: OUTSIDE (see figure 4.1.1).
Fit each Boxlink in such a way that the labeling of the loudspeaker points away (see figure 4.1.2).
Figure 4.1.1 - boxlink connector B und A
Two locking pins are fastened to each of connectors A and B.
Fasten the boxlink connectors to the product series VERA10, VERA20 and VERA36 with
both locking pins.
Figure 4.1.2 - Example: boxlink connector A
OUTSIDE
WARNING
NOTE
Assembly Instructions BLS
10
WARNING
4.2 System setup with boxlink connector
Figure 4.2 - Example system setup
Fasten the VERA S18 or VERAS33 loudspeakers front and rear to the associated flying frame
by means of a BLS boxlink connector set.
Connect all loudspeakers to each other (front and rear) using the boxlink connector sets. Use
all locking pins of the BLS boxlink connector sets.
Also heed chapter 4.1 “Use of boxlink connectors A and B” on page 9.
Boxlink A
Boxlink A
Boxlink BBoxlink B
Indice
Altri manuali TW Audio Rack e supporto
TW Audio
TW Audio QBM12i Manuale utente
TW Audio
TW Audio VERA LA900 Manuale utente
TW Audio
TW Audio SFV20 Manuale utente
TW Audio
TW Audio QBM15 Manuale utente
TW Audio
TW Audio QBM6 Manuale utente
TW Audio
TW Audio CBT24 Manuale utente
TW Audio
TW Audio SBT20 Manuale utente
TW Audio
TW Audio SBM8i Manuale utente
TW Audio
TW Audio VERA ORF900 Manuale utente
TW Audio
TW Audio SBM12 Manuale utente
TW Audio
TW Audio BCT24 Manuale utente
TW Audio
TW Audio CBQ30 Manuale utente
TW Audio
TW Audio VERA GSK36 Manuale utente
TW Audio
TW Audio SBC15 Manuale utente
TW Audio
TW Audio WHF Manuale utente
TW Audio
TW Audio SBM12i Manuale utente
TW Audio
TW Audio CBL Manuale utente
TW Audio
TW Audio SBC12 Manuale utente
TW Audio
TW Audio GSP20 Manuale utente
TW Audio
TW Audio SBM6 Manuale utente
