TWD Bicycle Pte MARS Manuale utente
MARS
PEDAL ASSIST ELECTRIC BICYCLE
OWNER’S MANUAL
Copyright© 2016 by TWD Bicycle Pte Ltd ® All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without
the express written consent of TWD Bicycle Pte Ltd, Singapore.
2
IMPORTANT
This manual contains important information that should be reviewed before riding the
Pedal Assist Electric Bicycle (Pedelec). Any user should read and understand this
manual before riding it. Always wear a helmet and follow the local regulations while
riding your Pedal Electric Bicycle. Obey local traffic rules and regulations at all times.
Ensure this Pedal Assist Electric Bicycle is in good condition before riding. Use
common sense and Ride Safely.
WARNING
When using the Pedal Assist Electric Bicycle for the first time, ensure that you are in
a safe open area to ride before you engage the Pedal Assist System (PAS) feature.
Start on the first level of pedal assist until you are comfortable with how the pedal
assist feature works. Never engage the pedal assist feature unless you are in a
balanced, ready to ride position with both hands on the handlebar controls. Failure to
follow and understand these instructions may result in risk of serious injury or even
fatal, and it may also damage your bicycle and void your warranty.
3
PAGE CONTENT
___________________________________________________________________
PAGE NO
1. PARTS GUIDE ................................................................................................ 4
2. HANDLE BAR ............................................................................................... 5
3. CONTROL UNIT ............................................................................................ 5
4. CHARGING .................................................................................................... 6
5. POWER ON /OFF ......................................................................................... 7
6. DISPLAY INDICATOR .................................................................................. 8
7. LIGHTS ......................................................................................................... 9
8. SHIFTING GEARS......................................................................................... 10
9. BELL ………………. ..................................................................................... 10
10.RIDING …………………………………………………………………………….. 11
11.BATTERY AND SAFETY PRECAUTION..…………………………………….. 12
12.USING THE CHARGER ………..……………………………………………….. 13
13.SERVICING …...………………………………………………………………….. 13
14.IN THE BOX ………………………………………………………………………. 14
15.SPECIFICATION ….……………………………………………………………… 14
16.WARRANTY AND DISCLAIMER ……………………………………………….. 15
4
1. PARTS GUIDE
___________________________________________________________________
1. Wheel
2. Rear Derailleur
3. Chain
4. Crank Set
5. Pedal
6. Seat Post
7. Saddle
8. Frame
9. Fork Suspension
10.Stem
11.Handlebars
12.Brake Lever
13.Control Unit (Display)
14.Suspension Adjuster
15.Front Brake
16.Front Light (when equipped)
17.Kick Stand
18.Motor
19.Rear Light (when equipped)
20.Rear Brake
21.Battery Casing
22.Charger Port / Battery Switch
5
2. HANDLEBAR
___________________________________________________________________
3. CONTROL UNIT
___________________________________________________________________
6
4. CHARGING
___________________________________________________________________
To Charge the Battery:
1. Open the protective flap and insert the charging point of the charger to the battery
module charging port securely.
2. Charge the battery until the charge indicator on the charger LED light turns from
red to green. When fully charged, unplug it and close back the protective flap.
NOTE: THE PROPER STORAGE TEMPERATURE FOR THE LITHIUM ION
BATTERY IS BETWEEN 5°C AND 30°C. BATTERY PERFORMANCE WILL BE
AFFECTED BY EXTREME TEMPERATURES. BATTERY DISTANCE PER
CHARGE MAY NOT BE OPTIMUM WHEN OPERATING IN EXTREME
TEMPRATURES. IT IS STRONGLY RECOMMENDED TO PARK IN A COOL, DRY
ENVIRONMENT. AVOID EXPOSING IT TO HOT SUN OR HEAT
CAUTION: ONLY USE THE ORIGINAL CHARGER AND BATTERY OTHERWISE
WARRANTY WILL BE VOID. DO NOT OPEN OR DISMANTLE CHARGER OR
BATTERY AS IT WILL VOID THE WARRANTY. THE LITHIUM ION BATTERY
SHOULD BE CHARGED IMMEDIATELY AFTER USE. DO NOT STORE THE
BATTERY FOR LONG PERIODS OF TIME WITHOUT CHARGE. IF YOU MUST
STORE THE BATTERY FOR A LONG TIME PERIOD WITHOUT USE, CHARGE IT
EVERY 2 TO 3 MONTHS TO AVOID REDUCING BATTERY’S OPERATING LIFE.
LITHIUM ION BATTERY MUST BE RECYCLED IN ACCORDANCE TO LOCAL
REGULATIONS AND IN SAFELY MANNER TO ENVIRONMENT.
7
5. POWER ON / OFF
___________________________________________________________________
To Power ON and OFF:
1. Set the battery module SWITCH to ON position.
2. To turn ON the control unit, hold the MODE button for 2 seconds.
3. To turn OFF the control unit hold the MODE button for another 2 seconds.
NOTE: WHEN NO ACTIVITY FOR MORE THAN 10 MINUTES. THE SMART
CONTROL UNIT WILL SHUT DOWN ITSELF TO CONSERVE ENERGY
8
6. DISPLAY INDICATORS
___________________________________________________________________
POWER ASSISTANCE LEVEL (PAS)
There are 9 (Nine) levels of pedal assist power. Start off slowly, using the first level
of pedal assist until you get a proper feel for the bike and how it handles in pedal
assist mode. Assistance levels indicate the output power of the motor. The default
value is level “1”.The default power ranges from level “0” to level “9”. Level “1” is the
minimum power. Level “9” is the maximum power. To adjust the desired level, press
UP or DOWN button. While riding, motor output level is indicated in the
varying power bar
NOTE: TO CONSERVE BATTERY ENERGY, CHOOSE THE MINIMUM POWER
ASSIST WHILE PEDALLING.
CAUTION: WHEN ERROR INDICATION APPEARS, POWER OFF YOUR
CONTROL UNIT AND CONTACT YOUR AUTHORISED DEALER FOR SERVICING
9
7. LIGHTS (When Equipped)
___________________________________________________________________
FRONT LED Light ON and OFF:
1. To turn ON the Front Light (when equipped) press and hold the UP button
for 2 seconds. The control unit display backlight will also be ON.
2. To turn it OFF, press and hold the UP button in the same way for another 2
seconds. The control unit display backlight will also be OFF.
REAR LIGHT: turn ON or OFF rear Red LED by pressing the button in the middle.
10
8. SHIFTING GEARS
___________________________________________________________________
FRONT and REAR gears shifting:
1. Shifting gear up, press with your thumb on the low shifter lever
2. Shifting gear down, pull the upper shifter lever one gear at a time
NOTE: YOU NEED TO PEDAL WHEN SHIFTING UP OR DOWN GEARS.
9. BELL
___________________________________________________________________
This bicycle comes with integrated bell at the left brake lever for your convenience.
Indice
Altri manuali TWD Bicycle Pte Bicicletta
