U-Line H-2449 Manuale utente

Altri manuali U-Line Magazzinaggio

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente

0313 IH-2449PAGE 1 OF 3

GARMENT STORAGE

CENTER WITH SHELVES

H-2449

PARTS

ASSEMBLY

Connector x 6 36 x 18" Shelf x 1

Tall Post Top x 6 Tall Post Bottom x 6

18 x 18" Shelf x 12

Shelf Support (52 Sets)

Garment Rod x 1

Self-leveler x 8 Garment Rod Hanger x 2

Short Post x 2

Figure 1

Figure 2

POST ASSEMBLY

1. Connect tall post tops and tall post bottoms to each

other by screwing them together. (See Figure 1)

NOTE: Tall post tops have a black plastic cap in

the top of the post.

TO INSTALL SELF-LEVELERS

1. Make sure post is positioned as shown. (See Figure 2)

2. Insert self-leveler into open end of post. Tap on

ground to slide self-leveler into post.

3. Repeat step 2 for all other posts.

TO INSTALL OPTIONAL CASTERS

1. Make sure post is positioned as shown. (See Figure 3)

2. Engage the wheel brakes to keep casters from

rolling during assembly. Use a rubber mallet to tap

caster stem into posts. (See Figure 3)

Figure 3

0313 IH-2449PAGE 2 OF 3

UNIT ASSEMBLY

1. Snap shelf supports into the very bottom groove of

two short and two tall posts. (See Figure 4)

2. Slide posts through underside of square shelf until it

slides firmly over the supports. (See Figure 5)

3. Take the other four tall posts, snap shelf supports into

the very bottom groove on all four posts. Slide posts

through underside of square shelf until it slides firmly

over the supports. (See Figure 6)

4. Position each set of four posts as shown and snap

four sets of shelf supports into the groove directly

above the square shelves of the inner four posts.

(See Figure 7)

5. Slide a square shelf onto the inner four posts until

shelf slides firmly over the supports. (See Figure 8)

6. Snap four sets of shelf supports onto the outer posts

with 5 grooves visible. And 4 sets of shelf supports on

the inner posts with 3 grooves visible. (See Figure 9)

7. Slide two square shelves onto the posts until shelves

slide firmly over the supports. (See Figure 10)

Figure 7

Figure 8

ASSEMBLY CONTINUED

Figure 4 Figure 5

Figure 6

Figure 9

Figure 10

0313 IH-2449PAGE 3 OF 3

ASSEMBLY CONTINUED

UNIT ASSEMBLY CONTINUED

8. Snap eight sets of shelf supports onto the posts with

five grooves visible on all eight posts. Slide two

square shelves onto the posts until shelves slide firmly

over the supports.

9. Repeat step 8 one more time. (See Figure 11)

LEFT SIDE OF THE UNIT

10. Snap four sets of shelf supports onto the left four posts

with twelve grooves visible between the lower shelf.

11. Slide a square shelf onto the posts until shelf slides

firmly over the supports. (See Figure 12)

12. Repeat steps 10 and 11 twice. (See Figure 12)

RIGHT SIDE OF THE UNIT

13. Snap four sets of shelf supports onto two inner posts

and two outer posts. (See Figure 13)

14. Slide the rectangular shelf at the top of the posts until

shelf slides firmly over the supports. (See Figure 13)

15. Slide garment rod hangers onto garment rod.

(See Figure 14)

16. Slide the longer end of garment rod hangers

through the shelf wires. (See Figure 15)

17. Hook the short end of garment rod hangers onto the

center wire of the shelf. (See Figure 16)

18. Pull garment rod

back and down,

one side at a time,

until long end

of garment rod

hanger snaps into

place.

Fig ur e 11

Figure 12

Figure 13

Figure 14

Figure 15

VIEW FROM

THE BOTTOM

Figure 16

π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA

1- 80 0 -295 - 5510

uline.com