UAV-1005202-001 Rev A
1.3 skyLinkApp and Mission Planner
Open the skyLinkApp.exe, configure the COM Settings to TCP, enter the IP
address of the skyStation, and enter the default Control port 42431. When
the data arrives, skyLinkApp.exe will begin graphing the radio link statistics.
NOTE: If you are not able to connect to the skyStation it is likely your
firewall is blocking the broadcast on port 42431. Please setup your
firewall to allow skyLinkApp.exe broadcast access to port 42431.
Figure 1-2 Automatic discovery. The IP address of the skyStation appears in the upper left
If you encounter a message from Windows Defender Firewall when
launching skyLinkApp, select Private Networks and press “Allow
Access”.
