Uberhaus 1820 Manuale utente

DIGITAL CERAMIC TOWER HEATER

OWNER’S MANUAL

MODEL: 1820

RONA SKU: 63545000

IMPORTANT INSTRUCTIONS

READ & SAVE

TABLE OF CONTENTS

Important Instructions ………………………………………………………………………………………… 3

Getting to know your heater………………………………………………………………………….……… 5

Installation…..……………………………………………………………………………………………….. 5

Operating Instructions……………………………………………………………………………………… 6

Safety Feature………………………………………………………………..…………………………..… 7

Troubleshooting………………………………………………………………………………………………. 8

Maintenance…..…………………………………………………………………………………………….. 9

Storage….………………………………………………………………………………………..…………... 9

Warranty………………………………………………………………………………………………………. 9

IMPORTANT INSTRUCTIONS

RULES FOR SAFE OPERATION

NOTE: There may be a trace of smoke or odour when unit is first operated. Do not be

alarmed. This indicates that a drop of oil fell on the heating coil during the manufacturing

process. It will quickly evaporate and should not re-occur.

Make sure that the room in which the appliance is located is well ventilated during this

operation.

WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED

TO REDUCE RISK OF FIRE, ELECTRICAL SHOCK AND INJURY TO PERSONS OR PROPERTY,

INCLUDING THE FOLLOWING

1. Read all instructions before using this heater.

2. Check that neither the appliance nor the power cable has been damaged in any way during

transportation.

3. Make sure that no pieces of polystyrene or other packaging material have been left between

elements of the appliance. It may be necessary to pass over the appliance with a vacuum

cleaner.

4. Be sure that the plug is fully inserted into appropriate receptacle. Please remember that

receptacles also deteriorate due to aging and continuous use: check periodically for signs of

overheating or deformations evidenced by the plug. Do not use the receptacle and CALL your

electrician.

5. Connect to properly polarized outlets only.

6. We do not recommend use of an extension cord as it may overheat and cause a risk of fire.

However, if you have to use an extension cord, the cord should be No. 14 AWG minimum size

and rated not less than 1875 watts, and has to be used only for supplying power to this heater.

7. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over.

8. Extreme caution and supervision is necessary when any heater is used near children or pets.

Do not operate the heater if unattended.

9. Always unplug heater when not in use.

10. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Place

cord away from traffic area where it will not be tripped over.

11. It is normal for the heater’s plug and cord to feel warm to the touch. A plug or cord which

becomes hot to the touch or becomes distorted in shape may be a result of a worn electrical

outlet. Worn outlets or receptacles should be replaced prior to further use of the heater.

Plugging heater into a worn outlet/receptacle may result in overheating of the power cord or fire.

12. To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft

surfaces, like a bed, where openings may become blocked.

13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may

cause electric shock, fire or damage to the heater.

14. To prevent overload and blown fuses, be sure that no other appliance is plugged into the same

outlet or into another outlet wired into the same circuit.

15. A heater has hot or arcing or sparking pads inside. Do not use it in areas where gasoline, paint or

flammable liquids are used or stored.

16. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has

been dropped or damaged in any manner. Return the heater to an authorized service facility for

examination, electrical or mechanical adjustment or repair.

17. This heater is not intended for use in any area where there is standing water. Never locate

heater where it may fall into a bathtub or other water container.

18. Do not use outdoors.

19. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use

handle when moving the unit. Keep flammable materials, such as furniture, pillows, bedding,

papers, clothes and curtains at least 3 feet (0.9 meters) from the front and top of the heater and

keep them away from the sides and rear. Keep the rear grille away from walls or drapes so as not

to block the air intake.

20. To disconnect the heater, turn controls to OFF, then remove the plug from the outlet.

21. Use this heater only as described in this manual. Any other use not recommended by the

manufacturer may cause fire, electric shock and injury to persons or damage to property.

22. Do not use attachments or filters. They are not recommended.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS

HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES.

ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING.

DO NOT IMMERSE HEATER IN WATER!

SAVE THESE INSTRUCTIONS

GETTING TO KNOW YOUR HEATER

INSTALLATION

The heater comes fully assembled in the box.

Carefully remove the heater from the bag and the carton.

The heater must be placed on a firm, level surface.

Plug the cord set into a 120V

～

electrical outlet. Be sure plug fits tightly in outlet. A loose fit will cause

overheating and damage the plug. Plug and cord set may feel warm during normal usage.

When the heater is initially plugged in, there will be a “beep” and the red light will come on indicating

that there is power to the unit. The red light will remain lit until the heater is unplugged from the

electrical outlet.

Control Panel with LCD display

OPERATING INSTRUCTIONS

Remove the heater from the packaging and place on a firm level surface.

To operate, connect to properly polarized outlet only. Match wide blade of plug to wide slot and fully

insert. Be sure to plug into a 120V AC, 60Hz outlet. This heater will not operate until the unit is

plugged in.

When the heater is plugged in a “beep” will sound once. The power indicator light will be illuminated

red for the duration of the heater’s operation.

Once the heater is turned ON (see section on POWER/OSC.), the LCD screen will display the room’s

current temperature.

YOUR HEATER IS EQUIPPED WITH 4 CONTROL SETTINGS, THERMOSTAT AND TIMER.

POWER/OSCILLATION

This button has 2 functions- 1) powering the heater ON/OFF and 2) controlling the heater’s

oscillation feature for widespread distribution of heat through the room. Oscillation can be

controlled at any time the heater is ON.

Using button Control Result

Press Power Heater powered ON at LOW heat output.

Press Oscillation Oscillation is on. Heat output is widely distributed.

Press Oscillation Oscillation is stopped. Heat output is targeted to one spot.

Additional Presses Oscillation Oscillation will cycle between ON and OFF.

Button held down for 3 seconds. Power Heater will power OFF.

MODE BUTTON

This button allows you to choose between 4 control settings (Low/High/Auto/Fan Only):

Using button Control Setting Displayed on LCD Use of Thermostat

Default

LOW heat output (900W) Current room temperature.

Press HIGH heat output (1500W) HIGH

Cannot be adjusted at these

settings.

Press AUTO SET TEMPERATURE Adjustable*

Press FAN ONLY (No heat) FAN Cannot be adjusted at this

setting.

Additional Presses Cycles the heater through HIGH/LOW/AUTO/FAN-ONLY settings.

THERMOSTAT

This heater is equipped with a thermostat function to sustain the desired temperature. Follow the

above directions to set the heater on AUTO mode. The thermostat can only be used and adjusted

while the heater is on AUTO mode.

To adjust the thermostat, set desired temperature with the (▲) and (▼) buttons. The LCD can display

temperature in ºF or ºC. Press the (▲) and (▼) buttons together to switch between ºF or ºC readout.

Once the room warms up to the set temperature, the heater will stop heating. The unit will continue

after the room temperature drops lower than the set temperature.

NOTE: It is normal, when using the thermostat, for your heater to cycle ON and OFF. The heater is

maintaining the set temperature for energy efficiency.

TIMER

This heater is equipped with a timer that can be set to countdown (1-8 hours) to automatic shutoff.

Pressing this button will shuffle through time ranges of 1-8 hours, indicated by illuminated lights at the

selected timed hour. When lights at these numbers are off, the heater will operate continuously.

Once the timer has been set, the timer will countdown the hours in 1 hour increments. The LCD

screen will display the remaining operating time and the heater will turn OFF automatically.

REMOTE CONTROL

Plug the heater into outlet and open the power switch on the base. Review the

above setting instructions to operate the remote control.

POWER- Press this button to start the heater.

OSCILLATION- Press the button to control the heater’s oscillation

feature for widespread distribution of heat through the room.

TIMER- Press the button to set the timer for the heater.

TEMPERATURE buttons (▲,▼or +,-) are for the thermostat function in the exact

same as Rotating the Power & Thermostat knob.

This button allows you to choose between 4 control settings (Low/High/Auto/Fan

Only)

•The remote control is powered by two AAA batteries (sold separately). There is a cover on the back of

the remote control that can be removed for replacement of the batteries as required.

•Do not mix old and new batteries, or batteries of different specifications.

•The batteries must be removed from the remote control before it is scrapped; it is to be disposed of

safely.

SAFETY FEATURES

SAFETY FEATURES OF THIS HEATER

Thermal Cut-off: If the unit overheats, the heater will temporarily be disabled. When this happens, turn

the unit OFF and unplug. Allow it to cool for 5-10 minutes. Inspect and remove any objects on or adjacent

to the heater. Resume use after unit has cooled sufficiently.

Overheat Alarm: This heater is equipped with an alarm that will sound to let you know parts of the unit

are getting excessively hot. Should this occur, unplug immediately. Once it is cooled, inspect for and

remove any objects on or adjacent to the unit. DO NOT OPERATE THE HEATER WITH THE ALARM

SOUNDING.

Safety Grilles: The heater is equipped with safety grilles at the front to protect the heater element. This

part of the heater can get extremely hot. Do not block this grille as it could cause fire.

Reset Instructions

1. Unplug the heater and wait 10 minutes for the unit to cool down.

2. After 10 minutes, plug the unit in again and operate normally.

TROUBLESHOOTING

If your heater fails to operate, please follow these procedures prior to contacting Customer Service:

Problem Probable Cause Solution

Heater is not plugged into a 120V

polarized outlet/receptacle.

Ensure unit is in OFF position. Plug in

unit and attempt to turn on again.

Thermal Fuse has permanently

disabled the unit’s fuse due to

extreme heat.

Do not attempt to fix heater yourself.

Contact customer service for repair

information.

Thermal Cut-Off has temporarily

turned off the heater due to high

temperatures.

Turn heater off and allow it to cool for

5-10 minutes. Once heater has cooled

off, check to make sure there are not

objects on or very close to the unit. To

resume operation, plug unit back in

once it has cooled off.

Heater will not

power on.

Breaker/Fuse has been tripped.

Please check your electrical box to

confirm the breaker has not been

blown. This may occur if the unit is

sharing a receptacle with another high

power consuming appliance. Ensure

unit is in OFF position. Plug in unit and

attempt to turn on again.

Attempt to plug unit into another

independent receptacle in the house.

Problem Probable Cause Solution

Room temperature has been

warmed up to thermostat setting.

To resume heating, adjust thermostat to

a higher setting. Refer to

THERMOSTAT section on page 6 for

more information.Power light is on,

but no heat is

released from unit. The timer was set for the heater to

turn off automatically.

Turn the timer function OFF by pressing

the timer button until lights at the hour

numbers are all off. For more

information, see TIMER section on page

A drop of oil fell on the heating coil

during the manufacturing process. It

will quickly evaporate and should

not occur again.

Ensure room in which heater is located

is well ventilated.The heater is

creating a burning

smell. Check & ensure there are no

flammable materials 3 ft (0.9m)

surrounding the heater.

Remove any flammable material

preventing air intake into the heater.

Unit over heats,

temporarily

disabling unit.

Objects placed near the heater

preventing proper air circulation.

Ensure room in which the heater is

situated is well ventilated and there is at

least 3 ft (0.9m) of space between the

heater and any objects.

The heater is

making a beeping

noise.

The heater has overheated,

activating the safety alarm.

Power the unit OFF and unplug. Check

to ensure there are no objects on or

adjacent to the heater causing it to

overheat. Refer to page 7 for more

information.

CLEANING AND MAINTENANCE

1. Before any cleaning, make sure that:

a.The heater is turned OFF.

b.Disconnect power supply at source by removing plug from power outlet.

c. Your heater is now ready to be cleaned.

2. Regular cleaning:

a. Do not use cleaning liquids or other chemicals to spray on the unit.

b. Interior dust can often be removed by using a vacuum cleaner with a crevice tool

attachment. DO NOT ATTEMPT TO OPEN THE UNIT.

c. To clean the enclosure, use a clean, soft and lightly damp cloth to gently wipe off the dirt

from the surface of the unit. Be sure not to wet the heating element and the switches.

Allow the unit to dry completely before using it.

CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE HEATER AS THIS

COULD CREATE A FIRE OR ELECTRIC SHOCK HAZARD, DAMAGING THE UNIT.

STORAGE

1. Perform the cleaning procedures described in “Cleaning/Maintenance”.

2. Wipe all parts to dry.

3. Pack heater in a plastic bag.

4. Keep in a cool, dry place.

PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO COULD

VOID THE WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.

WARRANTY

Thank you for purchasing this UBERHAUS product. These products have been made to demanding,

high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of

12 months from the date of purchase. This warranty does not affect your statutory rights.

For service within the warranty period, please contact the store where the product was purchased.

Product model number and proof of purchase are required for any service request. RONA reserves the

right to repair or replace the defective product, at its discretion.

For any other question, please call our toll-free service line at 1-866-283-2239, Monday to Friday from 8

AM to 6 PM, Eastern time.

Normal wear and tear, including accessory wear, is not covered under this warranty. The product is

guaranteed for 12 months if used for normal trade purposes, and is valid for the original buyer only. Any

warranty is deemed invalid if the product has been overloaded or used improperly, or subject to neglect or

attempted repairs other than by an authorized agent. Heavy-duty, daily professional or hire usage are not

guaranteed. RONA is not responsible for any costs related to labour, injuries or any other loss incurred

during the product installation, repair or replacement, including any indirect or consequential damages.

Due to continuous product improvement, we reserve the right to change the product specifications without

prior notice.

CHAUFFERETTE TOUR EN CÉRAMIQUE

À AFFICHAGE NUMÉRIQUE

MANUEL D'UTILISATION

MODÈLE: 1820

CODE RONA: 63545000

DIRECTIVES IMPORTANTES À LIRE ET À

CONSERVER

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Uberhaus Stufa

Uberhaus

Uberhaus 70395004 Manuale utente

Uberhaus

Uberhaus 10625001 Manuale utente

Uberhaus

Uberhaus HC15-10 Manuale utente

Uberhaus

Uberhaus Pro HFK48 Manuale di istruzioni per l'installazione

Uberhaus

Uberhaus 05775003 Manuale utente

Uberhaus

Uberhaus 97955001 Manuale utente

Uberhaus

Uberhaus HPS-C-GH Manuale utente

Uberhaus

Uberhaus 1861 Manuale utente

Uberhaus

Uberhaus 68125108 Manuale utente

Uberhaus

Uberhaus 68125104 Manuale utente

Uberhaus

Uberhaus HMFD-1500 Manuale utente

Uberhaus

Uberhaus HC09C15 Manuale utente

Uberhaus

Uberhaus 10625002 Manuale utente

Uberhaus

Uberhaus 70395001 Manuale utente

Uberhaus

Uberhaus PRO PH-936M Manuale utente

Uberhaus

Uberhaus HO-0221 Manuale utente

Uberhaus

Uberhaus 1362 Manuale utente

Uberhaus

Uberhaus 10635000 Manuale utente

Uberhaus

Uberhaus HMC-1500TW Manuale utente

Uberhaus

Uberhaus PH-822 Manuale utente

Uberhaus

Uberhaus PH-891 Manuale utente

Uberhaus

Uberhaus ECH106 Manuale utente

Uberhaus

Uberhaus 05775001 Manuale utente

Uberhaus

Uberhaus 68125105 Manuale utente

Manuali Stufa popolari di altre marche

oventrop

oventrop Regucor Series Manuale utente

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuale utente

ELMEKO

ELMEKO ML 150 Manuale utente

BN Thermic

BN Thermic 830T Manuale utente

KING

KING K Series Guida

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guida rapida

Well Straler

Well Straler RC-16B Manuale utente

EUROM

EUROM 333299 Manuale utente

Heylo

Heylo K 170 Manuale utente

Eterna

Eterna TR70W Manuale utente

Clarke

Clarke GRH15 Manuale di istruzioni

IRSAP

IRSAP The Radiator Company Ovali Manuale utente

Empire Heating Systems

Empire Heating Systems WCC65 Manuale utente

Wetekom

Wetekom 92 86 43 Manuale utente

Desa

Desa SPC170-F Manuale utente

Watlow

Watlow Watrod Electric Tubular Heaters Manuale utente

Haverland

Haverland ECO-DRY GPS Series Manuale elenco delle parti

Stelpro

Stelpro ASILVC2060 Series Manuale utente