Ubiquiti UAP-AC-LR Manuale utente

802.11AC Scalable

Enterprise Wi-Fi Technology

Model: UAP-AC-LR

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi®AP.

This Quick Start Guide is designed to guide you through

installation and also includes warranty terms.

Package Contents

UniFi AP AC LR Mounting Bracket Ceiling Backing Plate

Flat Head Screws

(M3x50, Qty. 4)

Keps Nuts

(M3, Qty. 4)

Screws

(M2.9x20, Qty. 4)

Screw Anchors

(M3x20, Qty. 4)

802.11ACScalable

EnterpriseWi-Fi Technology

Model:UAP-AC-LR

Gigabit PoE* (24V, 0.5A)

with Mounting Bracket

Power Cord* Quick Start Guide

* Only the single-pack of the UAP-AC-LR includes a PoE adapter and

power cord.

Installation Requirements

• CAT5/6 cable

• Phillips screwdriver

• Drill and drill bit (6 mm for wall-mounting or 3 mm for

ceiling-mounting)

• Optional: Drywall or keyhole saw (to cut 18 mm hole for

Ethernet cable feed)

responsibility to follow local country regulations, including operation within legal frequency

channels, output power, indoor cabling requirements, and Dynamic Frequency Selection

(DFS) requirements.

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8

• Java Runtime Environment 1.6 (or above)

• Web Browser: Mozilla Firefox, Google Chrome, or Microsoft

Internet Explorer 10 (or above)

• UniFi Controller software v4.6 or higher (available at:

downloads.ubnt.com/unifi)

Network Topology Requirements

• A DHCP-enabled network (for the AP to obtain an IP address

as well as for the wireless clients after deployment)

• A management station running the UniFi Controller

software, located either on-site and connected to the same

Layer-2 network, or off-site in a cloud or NOC

UAP-AC Outdoor

NetworkHealth

DASHBOARD

MAP

DEVICES

CLIENTS

CALLS

STATISTICS

INSIGHTS

SETTINGS

CURRENTSITE

Default

REFRESHRATE

2minutes

O-Site

Cloud/NOC

On-Site

Management

Station

UniFi Switch

UniFi

Security

Gateway

Internet

UAP-PRO

LAN

WAN

NetworkHealth

DASHBOARD

MAP

DEVICES

CLIENTS

CALLS

STATISTICS

INSIGHTS

SETTINGS

CURRENTSITE

Default

REFRESHRATE

2minutes

UAP-AC-LR

Sample Network Diagram

All UniFi devices support off-site management controllers.

For setup details, see the User Guide on the website:

documentation.ubnt.com/unifi

Hardware Overview

LED

LED Color Status

White Factory default, waiting to be integrated.

Flashing White Initializing.

Alternating

White/Blue

Device is busy; do not touch or unplug it.

This usually indicates that a process such

as a firmware upgrade is taking place.

Blue

Indicates the device has been successfully

integrated into a network and is working

properly.

Quickly

Flashing Blue

This is used to locate an AP.

When you click Locate in the UniFi

Controller software, the LED on the AP will

flash. It will also display the location of the

AP on the map.

Steady Blue

with occasional

flashing

Indicates the device is in an isolated state

(all WLANs are brought down until an

uplink is found).

Ports

Locking Notch

Cable Feed Plug Reset ButtonEthernet Port

Locking Notch The Locking Notch will be used with the

Mounting Bracket to help secure the UniFi AP. (This is described

further in the Mounting Bracket section.)

Ethernet This Gigabit Ethernet port is used to connect the

power and should be connected to the LAN and DHCP server.

Power can be provided by a Ubiquiti Networks UniFi Switch or

Gigabit PoE adapter (included with single-pack only).

Reset The Reset button serves two functions for the UniFi AP:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

Alternatively, the UniFi AP may be reset remotely via a Reset

button located on the bottom of the Gigabit PoE adapter.

Cable Feed Plug If your Ethernet cable feeds along the

mounting surface, remove the Cable Feed Plug.

Mounting Bracket

Locking Tab

Mounting Bracket

Locking Tab During installation, the Locking Tab on the

Mounting Bracket moves from the Initial Position to the Final

Position, where the Locking Tab fits securely into the Locking

Notch on the UniFi AP to help prevent theft.

Initial Position SlotFinal Position

Note:

If you need to remove the UniFi AP from the

Mounting Bracket, insert a paper clip in the Slot to release

the Locking Tab and turn the UniFi AP counterclockwise.

Hardware Installation

The UniFi AP can be mounted on the wall or ceiling. Perform

the steps for the appropriate installation:

Wall Mount

1. Position the Mounting Bracket at the desired location on

the wall with the arrow pointing up.

2. Use a pencil to mark the four mounting holes. Use a 6 mm

drill bit to drill the mounting holes.

Arrow

3. If your Ethernet cable feeds through the wall, then cut or

drill a circle approximately 18 mm in diameter. Then feed

the CAT5/6 cable through the hole.

25 mm

Note: 25 mm is the distance from the center of the

bottom mounting hole to the center of the cable hole.

4. Insert the Screw Anchors into the 6 mm holes. Secure the

Mounting Bracket to the wall by inserting the Screws into

the anchors.

5. If the Ethernet cable runs along the mounting surface, then

remove the Cable Feed Plug.

6. Connect the Ethernet cable to the Ethernet port.

7. Align the arrow on the UniFi AP with the arrow on the

Locking Tab of the Mounting Bracket.

Locking Tab

Arrow

8. Ensure that the UniFi AP is firmly seated on the Mounting

Bracket. Turn the UniFi AP clockwise until it locks into place

and the Locking Tab fits securely into the Locking Notch.

Indice

Altri manuali Ubiquiti Punto di accesso

Ubiquiti

Ubiquiti NanoBeam NBE-5AC-19 Manuale utente

Ubiquiti

Ubiquiti UniFi UAP-IW Manuale utente

Ubiquiti

Ubiquiti UniFi UAP-AC-IW Manuale utente

Ubiquiti

Ubiquiti PowerBeam AC PBE-5AC-620 Manuale utente

Ubiquiti

Ubiquiti Rocket AC R5AC-PTMP Manuale utente

Ubiquiti

Ubiquiti powerbeam m5 PBE-M5-400-ISO Manuale utente

Ubiquiti

Ubiquiti NanoBeam M2 NBE-M2-13 Manuale utente

Ubiquiti

Ubiquiti UAP-AC-M Manuale utente

Ubiquiti

Ubiquiti AF-3X Manuale utente

Manuali Punto di accesso popolari di altre marche

LevelOne

LevelOne WAP-6101 Manuale utente

Ruckus Wireless

Ruckus Wireless ZoneFlex R300 Manuale utente

Meru Networks

Meru Networks ap400 Manuale utente

Tranzeo Wireless Technologies

Tranzeo Wireless Technologies EL-500 Manuale utente

LevelOne

LevelOne WAP-8101 Manuale utente

Pakedge

Pakedge WK-1-C Manuale utente

EnGenius

EnGenius EWS550AP Manuale utente

Edge-Core

Edge-Core ECW5320 Manuale utente

Ruijie

Ruijie RG-AP130(W2) Manuale di installazione e funzionamento

Intellinet

Intellinet 524711 Manuale utente

Zoomnet

Zoomnet Bgate-GT10-D24-N22-P Manuale utente

Comtrend Corporation

Comtrend Corporation WAP-PC1200C Manuale utente

Ruijie Networks

Ruijie Networks RG-AP520-I(G2) Series Manuale di installazione e funzionamento

Hamlet

Hamlet Wireless Access Point 150 Manuale utente

Zhone

Zhone SkyZhone 1600 Manuale utente

Commax

Commax T45-T Manuale utente

Linksys

Linksys LAPN600 Manuale utente

LG-Ericsson

LG-Ericsson EARU 1112 Manuale utente