Ubiquiti USG Manuale utente

UniFi Security Gateway Power Adapter (12V, 1A) Power Cord

Screws (Qty. 2) Screw Anchors (Qty. 2)

Console

Package Contents

UniFi Controller System Requirements

Microsoft Windows 8, Mac OS X, or Linux

Java Runtime Environment 1.6 (or above)

Web Browser: Mozilla Firefox, Google Chrome, Microsoft Edge, or Microsoft Internet

Explorer 11

UniFi Controller software v5.4 or higher (available at:

ui.com/download/uni

)

Hardware Overview

Ports Panel

RJ45 serial console port for CLI management. Use a RJ45-to-DB9 serial console cable to

USG Quick Start Guide

Click for

Table of Contents

Reset

WAN 1 Port

LAN 1 Port

WAN 2 / LAN 2 Port

System LED

Power LED

connect the Console port to your computer. Then congure using the following settings:

Baud rate 115200

Data bits 8

Parity NONE

Stop bits 1

Flow control NONE

Resets to factory defaults. The UniFi Gateway should be powered on. Press and hold the Reset

button for about 10 seconds until the right LED on the WAN 2 / LAN 2 port starts ashing and

then becomes solidly lit. After a few seconds, the LED will turn oﬀ, and the UniFi Gateway will

automatically reboot.

Supports 10/100/1000 Ethernet WAN connections. Default setting is DHCP client.

Supports 10/100/1000 Ethernet LAN connections. Default setting is DHCP Server.

Server IP: 192.168.1.1/24

Supports 10/100/1000 Ethernet connections. Congure the port using the UniFi Gateway

conguration interface.

LEDs

Click here

for detailed descriptions.

Oﬀ Power Oﬀ

USG Quick Start Guide

Click for

Table of Contents

Speed/Link/Act LED

Green Power On

Oﬀ No Link

Amber Link Established at 10/100 Mbps

Amber Flashing Link Activity at 10/100 Mbps

Green Link Established at 1000 Mbps

Green Flashing Link Activity at 1000 Mbps

Hardware Installation

Wall-Mounting (Optional)

USG Quick Start Guide

Click for

Table of Contents

USG Quick Start Guide

Click for

Table of Contents

Connecting Power

USG Quick Start Guide

Click for

Table of Contents

Network Connections

USG Quick Start Guide

Click for

Table of Contents

Software Installation

Download the latest version of the UniFi Controller software at:

ui.com/download/uni

From a management station connected to the same Layer-2 network, launch the installer and

follow the on-screen instructions.

Note:

If you already have UniFi Controller v5.4 or higher installed, go to the section,

Adopting the UniFi Gateway.

After you have installed the software and run the UniFi Installation Wizard, a login screen will

appear for the UniFi Controller management interface. Enter the username and password

that you created and click Sign In.

USG Quick Start Guide

Click for

Table of Contents

You can manage your network and view network statistics using the UniFi Controller

management interface. For information on using the UniFi Controller software, refer to the

User Guide located on our website at:

ui.com/download/uni

Adopting the UniFi Gateway

1. From the UniFi Controller dashboard, click Devices in the left menu bar.

2. Locate the UniFi Gateway in the list of devices under the Model column. Click Adopt.

3. The System LED on the UniFi Gateway will turn blue to conrm that it is successfully

adopted.

Optional WAN Port Conguration via Layer 3

USG Quick Start Guide

Click for

Table of Contents

By default, the WAN port is set to DHCP so it can be assigned network settings by the service

provider. To change the setting, connect a computer directly (or through a switch) to the LAN

1 port of the UniFi Gateway.

1. From a web browser, go to https://setup.ui.com

2. Enter your Username and Password. Click Sign In.

Note:

If the UniFi Gateway has not been adopted by a UniFi Controller, the login

window will be skipped and the Setup window will appear.

3. In the Setup window, click Edit Conguration to congure the WAN port to DHCP, Static IP,

or PPPoE.

For information on using the UniFi Controller software, refer to the User Guide located on our

website at:

ui.com/download/uni

Specications

USG

Dimensions 135 x 135 x 28.3 mm

(5.32 x 5.32 x 1.11")

USG Quick Start Guide

Click for

Table of Contents

USG

Weight 366 g (12.9 oz)

Networking Interfaces



Serial Console Port (1) RJ45 Serial Port

Data Ports (3) 10/100/1000 Ethernet Ports

Max. Power Consumption 7W

Power Supply 12VDC, 1A Power Adapter (Included)

Supported Voltage Range 9 to 24VDC

LEDs



System Status

Serial Console Port Power

Data Ports Speed/Link/Activity

Layer 3 Forwarding Performance



Packet Size: 64 Bytes 1,000,000 pps

Packet Size: 512 Bytes or Larger 3 Gbps (Line Rate)

Processor Dual-Core 500 MHz, MIPS64 with Hardware Acceleration for

Packet Processing

System Memory 512 MB DDR2 RAM

On-Board Flash Storage 2 GB

Rackmount Yes

Operating Temperature -10 to 45° C (14 to 113° F)

Operating Humidity 10 to 90% Noncondensing

Certications CE, FCC, IC

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specied by the manufacturer.

WARNING:

Failure to provide proper ventilation may cause re hazard. Keep at least 20 mm of

clearance next to the ventilation holes for adequate airow.

WARNING:

To reduce the risk of re or electric shock, do not expose this product to rain or

moisture.

WARNING:

Do not use this product in location that can be submerged by water.

WARNING:

Avoid using this product during an electrical storm. There may be a remote risk of

electric shock from lightning.

Electrical Safety Information

USG Quick Start Guide

Click for

Table of Contents

Altri manuali per USG

Altri manuali Ubiquiti Portale

Ubiquiti

Ubiquiti airGateway Manuale utente

Ubiquiti

Ubiquiti UniFi USG Manuale utente

Ubiquiti

Ubiquiti USG-PRO-4 Manuale utente

Ubiquiti

Ubiquiti Dream Machine Pro UDM-Pro Manuale utente

Ubiquiti

Ubiquiti GBE Manuale utente

Ubiquiti

Ubiquiti UniFi Manuale utente

Ubiquiti

Ubiquiti UDM-Pro Manuale utente

Ubiquiti

Ubiquiti UniFi Dream Machine Pro UDM-Pro Manuale utente

Ubiquiti

Ubiquiti USG Manuale utente

Ubiquiti

Ubiquiti USG-PRO-4 Manuale utente

Ubiquiti

Ubiquiti sunMAX SM-SG Manuale utente

Ubiquiti

Ubiquiti UniFi USG Manuale utente

Ubiquiti

Ubiquiti USG-PRO-4 Manuale utente

Ubiquiti

Ubiquiti UniFi UDM Manuale utente

Ubiquiti

Ubiquiti UniFi Dream Machine Pro UDM-Pro Manuale utente

Ubiquiti

Ubiquiti UniFi Security Gateway XG-8 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente