Ubiquiti AirCube Manuale di istruzioni

Ubiquiti airCube Router Config & Install Instructions

(for Experienced Installers) v3.2

Before Pugging in the Router:

• Make sure you have the current airCube ﬁrmware on your laptop. (www.ui.com/

download/accessories/aircube).

• You’ll want these instructions open on your computer so you can copy UNMS key.

Power Up Router:

• Plug POE into airCube’s gray “24V POE In” port (NOT the blue port).

• Alternately use a 5V micro USB.

Plug/Connect Laptop to Router:

• Connect laptop via Ethernet to port 2 or 3 on the airCube.

• Alternatively, you can connect via Wi-Fi to the airCube -XXX Wi-Fi using the WPA2

password printed on the bottom of the router–but be sure your computer is not seeing

other Wi-Fi sources, they may hijack your config session.

Open airCube Dashboard in Browser and Log In:

• Open a browser and go to https://192.168.1.1

• Advance through “connection is not private” warnings

• Login with username “ubnt” and the “PSWD” printed on bottom of airCube (next to QR

code).

Update Firmware:

• Click “System” (gears icon) from black menu bar at left.

• Under “Device Maintenance” select “Upgrade Firmware.” (Alternatively, you can select

this from the top right of the main dashboard).

• Select the ﬁrmware ﬁle from your computer, then proceed through the steps to Verify

and Upgrade it.

• You will need to log back into the airCube after the upgrade completes—again using the

username “ubnt” and the “PSWD” on the bottom of the router.

(continued on next page)

Configure Settings on System Tab:

• Click “System” (gears icon) from bottom of black menu bar at left.

• Change the Device Name to the member’s PPPoE username with an -ac appended at the

end (get the PPPoE name from the Network | Radius area in Sonar)

• Change the Administrator Name to “admin”

• Click “Change Password” and change the password to the member’s PPPoE password.

• Make sure “POE Passthrough” is turned ON (unless this is a direct connect member)

• Turn Connect to UNMS on.

• From file copy of these instructions, copy/paste this text string into the UNMS Key field:

wss://172.16.2.200:443+h685PMGxcoBr9vMqyylP8rOKBdFtkSSTS3cWntHRkJ7k6k1M+allowSelfSignedCertificate

• Scroll to the bottom of the screen and click “Save Changes.”

Configure Settings on Network Tab:

• Select “Network” (ﬂowchart icon) from the left-side nav area and do the following:

• Change “Connection Type” to PPPOE.

• Enter the Radius Username and Password (from the Network | Radius area in Sonar).

• Make sure “Block Management Access” is turned OFF.

• Scroll to the bottom of the screen and click “Save Changes.”

Optional: Change WiFi SSID and PW

• (Do this optional Wi-Fi change as the last step so you don’t lose connection).

• Select the “Wi-ﬁ” (signal strength icon) from the left-side Nav menu and enter the new

SSID and WPA2 password.

• Remember to hit “Save Changes."

• The WPA2 password printed on the bottom of the airCube will no longer work.

Plug in Configured Router at Member’s Location (not for direct connect members):

• Use a shielded patch cable to connect the POE port on the POE power supply to the

airCube’s gray “24V POE In”. Note that the LAN port on the POE will remain empty.

• Plug the member’s CPE radio Ethernet cable in to the airCube’s blue WAN port.

• Use ports 2 and 3 for any local Ethernet networks.

• Using black electrical tape, tape over the Reset button hole.

Update Yellow Tips Sheet and Sonar Router records:

• Enter info at bottom of yellow Tips sheet and hand to member.

• In Sonar account page go to Custom Fields tab and enter airCube in router brand and

enter admin un and pw. Check the Router is in Managed Mode checkbox.

Indice

Altri manuali Ubiquiti Router di rete

Ubiquiti

Ubiquiti AFi-ALN Manuale utente

Ubiquiti

Ubiquiti EdgePoint R8 Manuale dell'operatore

Ubiquiti

Ubiquiti LTU LR Manuale utente

Ubiquiti

Ubiquiti UFiber UF-WIFI Manuale di istruzioni

Ubiquiti

Ubiquiti LiteStation2 Manuale utente

Ubiquiti

Ubiquiti EdgeRouter ER-8 Manuale utente

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Manuale utente

Ubiquiti

Ubiquiti EdgeRouter 6P Manuale utente

Ubiquiti

Ubiquiti AiAF-5 Manuale utente

Ubiquiti

Ubiquiti TS-8-PRO Manuale utente

Ubiquiti

Ubiquiti EdgeRouter X ER-X Manuale utente

Ubiquiti

Ubiquiti EdgeRouter X ER-X-SFP Manuale utente

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Manuale utente

Ubiquiti

Ubiquiti edgepoint r6 Manuale utente

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Manuale utente

Ubiquiti

Ubiquiti EdgeRouter PRO Manuale utente

Ubiquiti

Ubiquiti UniFi US-24-250W Manuale utente

Ubiquiti

Ubiquiti ER-12 Manuale utente

Ubiquiti

Ubiquiti UFber UF-WIFI Manuale utente

Ubiquiti

Ubiquiti EdgeRouter ER-12P Manuale utente

Ubiquiti

Ubiquiti ER-4 Istruzioni operative e di manutenzione

Ubiquiti

Ubiquiti UniFi Security Gateway PRO Manuale utente

Ubiquiti

Ubiquiti ER-8-XG Manuale utente

Ubiquiti

Ubiquiti Bullet Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza

Ubiquiti airCube Manuale di istruzioni

Manuali Router di rete popolari di altre marche