UCHIDA SP-22 Manuale utente
Operation Manual
UCHIDA STAPLER-PUNCHER
MODEL SP-22
Read this “Operation Manual” carefully before use.
Keep it at a specific place for handy reference.
17 April 2006
- 0 -
1
Safety Instructions
Definition of Symbols and Notes
In this manual following names and signs stand for possible dangers.
Danger
This Symbol stands for immediate danger threatening the life and health of persons.
Disregarding these instructions may cause severe damage to health and even serious
injuries.
Caution
This symbol stands for an endangering situation that may occur. Disregarding these
instructions may lead to slight injuries or damage to property.
Note
This symbol stands for notes, operational hints and other useful information. They are
convenient for exploiting the machine’s functional abilities.
Danger
Be sure to connect the ground. If not, electric leakage may result, which can cause fire or an electrical
shock. If you cannot connect the ground, consult your dealer or a maintenance or service company.
Operate the collator with AC current only. Use an exclusive outlet, as overloading may cause fire or an
electrical shock.
Do not place receptacles containing water, such as vases, flowerpots and cups, on the machine. Spilled
water can cause fire or an electrical shock
Do not remove the cover of the machine, as it can cause an electrical shock or injury.
Do not damage, destroy or process the power plug and cord. Placing heavy things on the cord, pulling it, or
bending it forcibly may damage the plug and cord and cause fire or an electrical shock.
Do not remodel the machine. It may cause fire or an electrical shock.
Do not plug or unplug the power cord from an outlet with a wet hand; it can result in an electrical shock.
Continuing operation in spite of irregularities, such as overheating, smoking and unusual odor, may cause
fire or an electrical shock. In such cases, turn off the power switch, remove the plug from the outlet and
contact your dealer.
When foreign substances, such as metal fragments, water or other liquids, fall into the machine,turn off the
power switch immediately, remove the plug from the outlet and contact your dealer. Continued operation
with such substances in the machine may cause fire or an electrical shock.
Caution
Do not install the machine in an unstable place, such as one that shakes or tilts. The machine may fall,
causing breakage or physical injury.
Do not install the machine in a humid or dusty place; excessive humidity and dust can cause fire or physical
injury.
Never unplug the power cord from the outlet by gripping the cord itself. Doing so may damage the cord,
causing fire or injury. Always disconnect the machine by gripping the plug.
Be sure to remove the power plug from the outlet when moving the machine, otherwise it may damage the
cord, causing fire or an injury.
When the collator will not be used for several days, such during consecutive holidays, etc., be sure to
unplug the power cord from the outlet for safety’s sake.
Do not open the unit cover and main cover during operation, or it may cause an accident.
Do not touch any part of the drive, including the roller, with a hand. It may cause an injury.
2
INTRODUCTION
Read this “Operation Manual” carefully before use.
Keep it at a specific place for handy reference.
Since the specifications of this machine are subject to change, be sure not to mistake this manual for one of
a different mode, descriptions of may differ.
CONTENTS
1. Precautions before Installation and Use ..............................................................................5
1.1 Place for installation.....................................................................................................5
1.2 Transport precaution.....................................................................................................5
1.3 Confirmation of contents and attachments...................................................................5
2. Component Name................................................................................................................6
2.1 Overview.......................................................................................................................6
3. Matters for Special Note......................................................................................................7
3.1 Definitions ....................................................................................................................7
3.2 Characteristics and purpose of use ...............................................................................7
3.3 When not in use............................................................................................................7
3.4 Caution while in use .....................................................................................................7
4. Preparations before Use.......................................................................................................8
4.1 Installation ....................................................................................................................8
5. Operation .............................................................................................................................9
5.1 Procedure and method ..................................................................................................9
5.2 Trouble symptoms and corrective action....................................................................11
5.3 Disposing of punch scraps..........................................................................................11
5.4 Stapling and punching position...................................................................................12
5.5 Staple cartridge replacement.......................................................................................12
5.6 Punching.....................................................................................................................14
5.7 Staple jam ...................................................................................................................14
6. Maintenance, Inspection, Expendables..............................................................................15
6.1 Important for maintenance and inspection .................................................................15
6.2 Daily maintenance......................................................................................................15
3
7. Troubleshooting.................................................................................................................16
7.1 Nature of problem and corrective action....................................................................16
7.2. In case of breakdown..................................................................................................17
8. Relocation or Disposal.......................................................................................................17
8.1 Relocation...................................................................................................................17
8.1.1 Removal of the machine from its present location..............................................17
8.1.2 Transport..............................................................................................................17
8.1.3 Installation ...........................................................................................................17
8.2 Disposal ......................................................................................................................17
9. Product Specifications.......................................................................................................18
9.1 Specifications..............................................................................................................18
4
1. Precautions before Installation and Use
1.1 Place for installation
This machine is also designed for IT power systems.
(1)Install the machine on a stable and level place.
(2) Use the Stapler-Puncher table designed for this machine.
(3) Avoid installing the machine in the following places for
safety’s sake and to avoid mechanical problems.
- Locations exposed to direct sunlight.
- Humid and/or dusty places
- Places exposed to wind, or near heat sources
1.2 Transport precaution
Handle with care so that the machine will not suffer shock or vibration.
1.3 Confirmation of contents and attachments
After unpacking the collator, check the attachments.
Should any part be missing, contact your dealer immediately.
Attachment Qty Figure
Staple cartridge 1
5
2. Component Name
2.1 Overview
6
3. Matters for Special Note
3.1 Definitions
Term Explanation
Paper jam Paper stuck in the machine
Double feed Feeding two or more sheets together
3.2 Characteristics and purpose of use
・Can staple and punch up to A3 size paper.
・Operation with or without punching can be selected.
3.3 When not in use
Remove the power plug from the outlet.
3.4 Caution while in use
・The power plug should be fully inserted into the outlet.
・Take care to prevent foreign matter from falling into the machine.
・Never turn the power switch off while the machine is operating.
・In the event of abnormal noise, bad odor or smoke, turn off the power switch immediately and contact
your dealer.
7
4. Preparations before Use
4.1 Installation
(1) Set the shift lever at Connection.
Connection
Independent
(2) Secure the hooks (one each at right and left
sides) of the stapler-puncher to the collator hook
pins. When removing them, do so while pulling
out the hook lever (one each at right and left
sides) of the stapler-puncher.
(3) Insert the connecting plug of the
stapler-puncher into the collator’s connector
and fasten them firmly with two screws.
Caution!
Be sure to insert the connector in the proper
direction.
(4) Insert the stapler-puncher power plug into the
collator optional power outlet.
8
5. Operation
5.1 Procedure and method
When using the stapler-puncher, also refer to the collator operation manual.
(1) Turn the power switch on.
(2) If stapling is not required, press the
PROGRAM key on the collator operation panel to
switch to Program mode.
( PROGRAM lamp will light)
(3) Press the STAPLE/1 key on the operation panel.
Stapling mode On: Lamp is lit.
Stapling mode Off: Lamp not lit.
Stapling is designed to be On with nothing
programmed after the collator power switch is on.
(4) Load the paper on the collator stations to be used;
adjust the stacking table guides left and right, slide
poles, and stacking slide guide to fit the paper size.
Caution!
Set the paper neatly and adjust it to fit the paper
feed guides. If the paper is not set properly, its
corners will not be uniform at the time of
stapler-puncher processing.
9
Indice
Altri manuali UCHIDA Attrezzature per ufficio
