UfiSpace S9500-22XST Manuale
Hardware Installation Guide
Disaggregated
Cell Site Gateway
S9500-22XST
R1.0
S9500-22XST Hardware Installation Guide | i
Table of Contents
1 Overview.......................................................................................1
2 Preparaon ...................................................................................2
2.1 Installaon Tools..........................................................................................2
2.2 Installaon Environment Requirements ......................................................3
2.3 Preparaon Check List .................................................................................4
3 Package Contents ..........................................................................5
3.1 Accessory List ..............................................................................................5
3.2 Component Physical Informaon ................................................................6
4 IdenfyingYourSystem .................................................................7
4.1 S9500-22XST DC Version Overview ............................................................7
4.2 S9500-22XST AC Version Overview.............................................................8
4.3 DC Version PSU Overview............................................................................9
4.4 AC Version PSU Overview ..........................................................................10
4.5 Fan Overview.............................................................................................10
4.6 Port Overview............................................................................................11
5 Rack Mounting ............................................................................ 12
6 InstallingFanModules................................................................. 13
7 InstallingPowerSupplyUnits ...................................................... 14
8 GroundingtheRouter.................................................................. 16
9 ConnecngPower ....................................................................... 18
9.1 DC Version .................................................................................................18
1. System Power Consumpon....................................................................................... 18
2. Aaching the Power Cable ......................................................................................... 18
3. Tighten the screw ....................................................................................................... 18
4. LED Indicaon on PSU................................................................................................. 18
5. Feed DC Power ........................................................................................................... 18
9.2 AC Version .................................................................................................19
1. System Power Consumpon....................................................................................... 19
2. Aaching the Power Cable ......................................................................................... 19
3. Tighten the screw ....................................................................................................... 19
10 VerifyingSystemOperation ..........................................................20
10.1 Front Panel LED .........................................................................................20
10.2 PSU FRU LED ..............................................................................................21
10.3 Fan FRU LED ...............................................................................................21
S9500-22XST Hardware Installation Guide | ii
11 Initial System Setup..................................................................... 22
12 CableConnecons.......................................................................23
12.1 Connecng the USB Extender Cable..........................................................23
12.2 Connecng a Cable to the ToD Interface ...................................................23
12.3 Connecng a Cable to the BITS Interface ..................................................23
12.4 Connecng the GNSS Interface .................................................................23
12.5 Connecng the 1PPS Interface ..................................................................24
12.6 Connecng the 10MHz Interface...............................................................24
12.7 Connecting the Transceiver........................................................................24
13Cautions ......................................................................................25
S9500-22XST Hardware Installation Guide | 1
1 Overview
The UfiSpace S9500-22XST is a high-performance, versatile open networking white box
router that is designed to address the changing needs of backhaul transport requirements
as Telecoms make the transition from legacy technologies towards 5G. It enables telecoms
and service providers to deploy disaggregated open network infrastructure to lower costs
and rapidly scale existing services for edge computing, mobile backhaul, and broadband
access applications.
The S9500-22XST is future-proofed with a powerful quad-core processor, 22 high-speed
interfaces, and full timing features supporting IEEE 1588v2 and SyncE. It is suitable for both
indoor and outdoor deployments with redundant, hot-swappable components for
convenience, increased availability, reliability and lower costs of maintenance.
This document describes the hardware installation process for S9500-22XST.
S9500-22XST Hardware Installation Guide | 2
2 Preparaon
2.1 InstallaonTools
Screwdriver
Crimping Tool
Grounding Lug
Screwdriver Crimping tool
d2 > 3.5 mm, W < 8.2 mm
14-AWG
W
d2
Insulaon Wire Lead
Ground Wire
(size #6 AWG)
0.5 +/- 0.02”
(12.7 +/- 0.5 mm)
14 AWG wire with ring terminal for
DC power supply
6-AWG wire for grounding
Wire-stripping tools for
stripping 6-AWG copper wire
Console cable
•PC with terminal emulation software. Refer to the "Initial System Setup" section for
details.
•Baud rate: 115200 bps
•Data bits: 8
•Parity: None
•Stop bits: 1
•Flow control: None
S9500-22XST Hardware Installation Guide | 3
2.2 InstallaonEnvironmentRequirements
•Power Reserve: The S9500-22XST power supply is available with:
1. DC Version: 1+1 active-active -48 voltage DC power supply field replaceable unit. or;
2. AC Version: 1+1 active-active universal 100-240V AC power supply field replaceable unit.
To ensure the active/active feed power design functions properly, a field with dual power
circuit is recommend and a reserve of at least 200 watts on each power circuit.
•Space Clearance: The S9500-22XST chassis width is 17.32 inches and shipped with a rack
mount kit and adjustable mounting rails suitable for 19 inch (48.3cm) wide racks. The depth
of the S9500-22XST chassis is 11.89 (30.2cm) inches without the field replaceable units
(FRUs). The handle of fan FRU is 1 inch (2.54cm) and the handle for the PSU FRU is 1.5
inches (3.81cm), therefore, a minimum space clearance of 2 inches (5.08cm) required on the
side with the fan FRUs and PSU FRUs. A total minimum reserve depth of 15.89 inches
(40.36cm) is required.
GNSSRST
GNSS ANT
S9500-22XST
SYNC STAT
IN
IN
OUT
BITS TOD
OUT
1PPS
10WHZ
FAN PWR
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
0
1
RTN
-75V-36
RTN
-75V-36
19”
For 19” rack width Depth from rack
to fan handle
Figure1.
GNSSRST
GNSSANT
S9500-30XS
SYNC STAT
IN
IN
OUT
BITS TOD
OUT
1PPS
10WHZ
FAN PWR
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
0
1
RTN
-75V-36
RTN
-75V-36
19” 22” 33”
For 19” rack width
4 POSTs case
For 22”~33” rack depth
Figure2.
15.89"
S9500-22XST Hardware Installation Guide | 4
•Cooling: The S9500-22XST airflow direction is front-to-back. Make sure the equipment on
the same rack have the same airflow direction.
GNSS ANT
1PPS
10WHZ
GNSSRST
S9500-22XST
SYNC STAT
IN
IN
OUT
BITS TOD
OUT
FAN PWR
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
0
1
RTN
-75V-36
RTN
-75V-36
Cool
Hot
Figure3.
Rear wall clearance = 1.0”
Boom DUT
Top DUT
AIR FLOW
AIR AIR AIRAIR AIR
Figure4.
2.3 PreparaonCheckList
Task Check Date
Power voltage and electric current requirement
DC version: -48V DC, 8-4 ampere maximum or;
AC version: 100-240V, 3-1.5 ampere
Installation spacing and weight load requirement:
(S9500-22XST is 1RU (1.75”/4.5cm) in height, 19” (48.3cm) in width,
and 16” (40.6cm) in depth without considering cable routing)
Thermal requirement
(S9500-22XST working temperature is -40 to 65°C (-40°F to 149°F),
airflow direction is front-to-back)
Installing tools requirement
(#2 Philips Screwdriver, 6-AWG wire stripper, and crimping tool)
Accessory requirement
(PC with terminal emulation software, console cable, 14-AWG wire
with ring terminal for power, 6-AWG wire for grounding)
S9500-22XST Hardware Installation Guide | 5
3 Package Contents
3.1 AccessoryList
Item Descripon Spec.&Dimensions Qty Weight
1Grounding Lug
1.97” x 0.44” x 0.3”
(# 6 AWG)
(50 x 11.1 x 7.5mm)
1 pcs 0.22lbs (10.0 g)/1 pcs
2Screw Kit (for
Grounding Lug)
2 x Screws M4*L8.0mm
4 x M4 Lock Washers 6 set 0.008lbs (3.8g)/1 set
3Rack Mount Bracket
1.98” x 1.69” x 0.79”
(19” width rack)
(50.4 x 43 x 20mm)
2 pcs 0.15lbs (67.2g)/2 pcs
(0.07lbs (33.6g)/pcs)
4Screw Kit (for Rack
Mount Bracket) 8 x Screws M4.0*L6.5mm 8 sets 0.01lbs (6.5g)/1 set
5Adjustable Mounng
Rail (for 4 post)
16.02” x 1.69” x 0.83”
(22” to 33” rack depth)
(406.8 x 43 x 21mm)
2 pcs 1.79lbs (810g)/2 pcs
(0.89lbs (405g)/pcs)
6
Screw Kit
(for Adjustable
Mounng Rail)
8 x Screws M4.0*L6.5mm 8 sets 0.01lbs (6.5g)/1 set
7
Cable USB 2.0 A
Type Male to Female
200 mm
7.87” (200mm) 1 pcs 0.021lbs (9.7g)/1 pcs
S9500-22XST Hardware Installation Guide | 6
3.2 ComponentPhysicalInformaon
Specicaon Item Descripon
Weight
Enre Chassis 22.05lbs (10kg)
S9500-22XST full set 14.44lbs (6.55kg)
DC/AC PSU 1.5lbs (691g)
Fan 0.2lbs (90g)
Ground lug 0.022lbs (10g)
Rack mount bracket 0.07lbs (33.6g)
Adjustable mounng rail 0.89lbs (405g)
USB extension cord 0.021lbs (9.7g)
Screw kit for ground lug 0.008lbs (3.8g) per set
Screw kit for rack mount
bracket and adjustable
mounng rail
0.1lbs (6.5g) per set
Dimension
S9500-22XST (W x D x H) 17.32” x 11.89” x 1.713”
(440 x 302 x 43.5mm)
PSU (W x D x H) 1.99” x 8.31” x 1.58” (50.5 x 211 x 40.2mm)
Fan (W x D x H) 1.57” x 1.57” x 1.1” (40 x 40 x 28mm)
S9500-22XST Hardware Installation Guide | 7
4 IdenfyingYourSystem
4.1 S9500-22XST DC Version Overview
SPEC LABEL CUS BAR CODE
SPEC LABEL CUS BAR CODE
D = 11.89”
(302 mm)
W= 17.32”
(440 mm)
H = 1.713”
(43.5 mm, 1RU)
Figure5.
Altri manuali per S9500-22XST
1
Indice
Altri manuali UfiSpace Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
