UIS WPC-110 Manuale utente

Wireless Power Controller User's Manual

Product Name: Wireless Power Controller

Model No: WPC-110

Input Power: AC110V 50/60Hz

Features Description:

1. The way to a wireless receiver by the WG-110 (Wireless Gateway) issued to the ON / OFF

signal to control the WPC-110 (Wireless Power Controller) on a Power outlet, control power

supply , you can phone from a distance through remote control home electrical equipment, to

provide users more convenience.

2. Can use the WCS-110 (Wireless Contact Sensor) or WMS-110 (Wireless Motion (PIR)

Sensor) to do even control, For example: Corridor night auxiliary lighting.

3. Easy to install, Play as long as you can in the power outlet.

4. Can be a positive and transparent operation of the button panel to control the WPC-110

(Wireless Power Controller) for power outlet of ON or OFF state, and bright blue LED lights

that action.

5. Easy link, when install at the first time to press the set button on the side of product binding

with repeater.

Outline Dimensions:

Feature Locator:

Installation Hints:

1. First WPC-110 (Wireless Power Controller) play in the City electric power outlet, press the

WPC-110 (Wireless Power Controller) side of the SET button, and then press the WR-110

(wireless repeater) at the bottom of the SET button, Wait for 30 seconds to 1 minute. If LED

indicator light flash three times that means linking success. If LED indicator light flash two

times that means fail.

2. Transparent front panel buttons, you can directly control the WPC-110 (Wireless Power

Controller) for to control ON / OFF output, If outlet have power output at the same time,

High-brightness blue LED lights also follow the light.

3. By WCC-110 (Wireless console controller), control WPC-110 (Wireless Power Controller) to

control ON / OFF output, can also make use of WMS-110 (Wireless Motion (PIR) Sensor)

signal, the WPC-110 (Wireless Power Controller) to do even controls, Please reference the user

manual of WCC-110(Wireless console controller) when setting.

Troubleshooting:

1. Problem: When link with WR-110 (Wireless repeater), there is no display of LED indicator

light for WPC-110 (Wireless Power Controller) to flash two or three times.

Solution: a. Be able to use small night light to confirm the plug power valid.

b. May be not press set button, need to link with repeater again.

c. Can press the transparent button in positive, check there is ON or OFF

response action.

d. If the above handles are invalid, please contact with agency.

2. Problem: Unable to link with WR-110 (wireless repeater).

Solution: a. It needs to confirm the distance between WCS-110 (Wireless Contact Sensor)

1. State of LED window

2. Button and red LED

3. Power outlet

4. (SET) Setting button

5. America power plug

and WPC-110 (Wireless Power Controller). Wireless connects in

non-camouflage straight line effective range 10 meters. May pull closer between

booth's distance tests to have a look first, whether to have the improvement

segment condition.

Specification:

Wireless Power Controller

Model No. WPC-110

Electrical Specification

Transmit Frequency 2.4GHz

Modulation GFSK

Transmit Power 0 dBm

Channel spacing 1 MHz

Channel NO. 81 Channel(2401~2481Mhz)

Range of operation 10 meters

Input Voltage (VAC) 110V AC +/- 5% (220V AC +/- 5%)OPTION

Output Current Capacity 13Amp. (AC) Max.

Display Type Red For communication status indication

Blue LED for power on/off indicator

Operation Interface Push Switch

Environmental Requirement

Operating temperature -20°C to 60°C

Storage temperature -20°C to 70°C

Humidity 90% RH Max. Non-Condensing

Mechanical Specification

Dimension (WxHxD, mm) 92x50x36

Weight 96g

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Canada Warning

"Industry Canada regulatory information Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device must accept any interference,

including

interference that may cause undesired operation of the device.""The user is cautioned that this

device should be used only as specified within this manual to meet RF exposure

requirements. Use of this device in a manner inconsistent with this manual could lead to

excessive RF exposure conditions."

Altri manuali UIS Controllori

UIS

UIS WAC-110 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente