Ultra DURA+ Guida
MIXER GRINDERS • WET GRINDERS • PRESSURE COOKERS
Visit www.elgiultra.com
to shop for Ultra
products & accessories
Dear Customer,
We're delighted to welcome you to the Ultra family of
millions of happy customers worldwide.
You've made a smart and informed decision to invest in
a perfectly made Ultra. Ultra products are inventive and
aesthetically superb with a combination of good quality,
precision and durability to help prepare the tastiest and
healthiest meal.
Ultra assures you of trouble-free performance for years.
However, in the unlikely event of any operational
problem, we would be more than happy to assist you.
ULTRA CUSTOMER CARE
Visit: www.elgiultra.com
to find the nearest Ultra Care Centre
1800 102 2040(Toll Free)
1
Features
Form Table Top
Capacity 1.25L
Motor Wattage 85 watts
Voltage 230V, 50Hz
Grinding Stones Conical
Drum AISI-304 Rust-Resistant Food Grade Stainless Steel
Shell ABS
Drum Shape Cylindrical
PRODUCT
INFORMATION
Multi-Utility Drum Yes
Power Surge Protector Yes
Shock Proof Yes
Stone Assembly weight 1.7 KG
Warranty 5 Years
Net Weight 8.8 kg
Product Dimension (mm) 400 x 230 x 315
Drum Size (mm) ø190 x 175
Motor Speed (Rated without Load) 1350 RPM
Box Contents Grinder Unit, User Guide and Batter Cleaner
Drum Speed (with Load) 155 - 160 RPM
2
Recommended Measure and Grinding TIme *
Grinding Medium
1 cup (200 ml) – 180 gms of idly rice
1 cup (200 ml) – 180 gms of black gram
Grinding Instructions
Rice and Dhal should be ground separately.
For better grinding result, do grind rice first and dhal next.
Do not use cut pieces of coconut; instead use only shredded coconut for grinding.
*Results under lab test conditions and may vary with actuals
Rice
Dhal
Minimum 106 gms 4
4
2
2 390 ml
80 ml
100 ml
780 ml
781 gms
41 gms
195 gms
Load Condition Measurements
before soaking
Soaking TIme
in Hrs
Water to be
added
Maximum
Minimum
Maximum
(Raw / Boiled)
3
HOW TO OPERATE YOUR
ULTRA
TABLE TOP GRINDER
Wash and clean the
drum and roller stone
assembly
Place the roller
assembly in the drum
in position as
indicated above the
drum
Take a cup of water
and pour it in to the
drum
Add the grinding
medium in small
quantities with
adequate water and
close the drum with
hatch
Remove the hatch, hold
the arm and press lock
to release, then swing
the arm upwards and
rest it suitably
Remove the drum
and use required
amount of batter. Store
the rest in your
refrigerator
For pulse/cereals,
always add in small
quantities to ensure
even grinding
Note:
When required
consistency
is achieved, switch off
the grinder
Press the switch
downwards to
turn on the grinder
Close the arm and
press gently to lock
automatically
Place the drum on
pulley coupler. Gently
rotate till the drum
fixes itself
Sequence of Operation
4
Remove the roller stone
assembly, place it on the
batter cleaner as shown
and rotate the stones to
wipe down the batter
into the drum
• Make sure you keep your Ultra Wet grinder clean and dry, always
• When not in use, disconnect the electric cord from the mains
• For best results and trouble-free performance, use Ultra Wet grinder only
as specified in this User Guide
• Be alert and cautious while operating in the presence of children and physically
challenged persons
• Always keep your Ultra Wet grinder away from heat sources
• Lift the appliance at its base
• Clean the drum and roller assembly thoroughly after every use
• Ensure that the grinder is in unlocked position while not in use
• Keep the wiper position facing the motor while grinding
(Please refer diagram printed on Arm)
DOs
• Do not run the grinder empty for more than a minute
• Do not use any other attachments. Use only those recommended by us
• Do not put your hand into the drum while grinding
• Do not unlock the arm while in operation
• Do not insert sharp objects into the slits. This would damage the parts inside
• Do not lubricate any parts with oil/grease
• Do not keep the drum upside down after washing
• Do not attempt to repair the grinder yourself. If there’s any fault, contact Customer Care
DON’Ts
MAKE YOUR
ULTRA WORK LONGER
5
6
EXPLODED VIEW OF
ULTRA
7
SL.
No. Part Name
1 Base Frame
2 Bottom Shoe
3 Slotted CSK - M5 x 12
4 Cheese Head Screw M4 x 15
5 Cheese Head screw M4 x 20
6 Brg. Hsg Plate
7 Deep Groove Ball Bearing 6202
8 Bearing Spacer
9 Poly ‘V’ Belt - 4PJ745
10 Driven Pulley - (Poly ‘V’)
11 Driven Pulley
12 Hex Socket Grub Screw M5 x 6
13 Washer Gromment ID5.5 x OD17 x T1
14 Gromment Motor Mount
15 Hexagon Nut M4
16 Spring Washer M4
17 MS Washer 4.5 x 12 x 1
18 Motor Mounting Plate
19 Bush - Motor Mounting Plate
20 Hexagon Nut M5
21 Capacitor 5 MFD
22 Ultra Motor 230V, 50Hz, 85W
23 Motor Fan
24 Wago 3 Way Connector Assy.
25 Wire Cord - 230 V
26 Switch -230 V
27 Cheese Head Screw M4 x 15
28 Hexagon Nut M3
29 Cheese Head Screw M4 x 15
30 Ms Washer 4.5 x 12 x 1
31 Cover - Switch Knob
32 Shell Assy
33 Stopper Arm Channel
SL.
No. Part Name
34 Lock Spring
35 Lock
36 Shell Top Cover
37 Cheese Head Scraw M5 x 8
38 Channel Bottom Cover
39 Slotted CSK Head Screw M5 x 8
40 Housing
41 Sleeve
42 Main Spring
43 Arm Channel
44 Hinge with Insert
45 M.S. Washer ID 8.5 x 0D 14.5 x T 0.5
46 Rubber Washer ID 8.5 x 0D 15.5 x T 0.3
47 Disc Spring 12.5 x 6.2 x 0.7
48 SS Hexagon Lock Nut M6
49 Split Pin 1.4 x 15
50 Channerl Top Cover
51 Hatch
52 Pin - Hinge
53 Plug Hinge Pin
54 Collar Pad
55 Adaptor
56 Flate Stone
57 Drum
58 Wiper Assy
59 Hexagon Lock Nut M8
60 Roller Lock Screw
61 Taper Roller Assy - I
62 Roller Lock Screw
63 Taper Roller Assy - II
8
Additional Attachments (Optional)*
Atta Kneader
*Attachments have to be purchased separately at additional cost
Coconut Scraper
Visit www.elgiultra.com
to watch the demo video
Indice
