Uncaged Ergonomics KT1 Manuale utente
www.UncagedErgonomics.com
ASSEMBLY & OPERATING INSTRUCTIONS:
KT1
Adjustable Height &
Angle Keyboard Tray
IMPORTANT: Before using your KT1:
Read and clearly understand the contents of this manual
Understand how to adjust KT1correctly
Practice adjusting KT1with nothing on it.
KT1allows you to easily adjust the height & angle of your keyboard to optimize your typing posture.
IMPORTANT: BEFORE using KT1or placing a keyboard & mouse on KT1, practice adjusting KT1’s height & angle.
1
A B
C
D
E
Have Questions? Need Help?
Out A+ customer support team is here to help:
EMAIL: [email protected]
PHONE: 240-583-0517
G
8 Black M6 Nuts
F
6 Silver M6x16 Screws H
8 Black M6x14 Screws
Plastic Runners
2
A
2. Align the Rail (A) with the edge of your desk 3. Use 6Fscrews to connect the Rail (A) to
the bottom of your desk.
4. Slide the Arm (B) into the Rail (A)
- Reinstall the 2 stopper screws
3 4
E
1. Remove the ARM (B) from the Rail (A).
A. Remove two Stopper Screws from the front edge
of the Rail (A).
B. Slide the ARM (B) off of the Rail (A)
1
A
B
Stopper Screws
A
B
Stopper Screws
www.UncagedErgonomics.com
ASSEMBLY & OPERATING INSTRUCTIONS:
KT1
Adjustable Height &
Angle Keyboard Tray
2
7
7. The Mouse Pad (D) attaches to the right or left side of the
Keyboard Tray (C). Release the thumb screw on the attachment to
move the Mouse Pad closer to or farther away from the Keyboard Tray.
D
C
8
8. Press down to tilt the Mouse Pad.
If the Mouse Pad is too loose, tighten the
2 screws on the Mouse Pad Mounting Bracket.
10
10. To adjust KT1’s height and tilt:
- Release the lever (10A) and simultaneously raise and
tilt the keyboard panel to your desired position
9
9.The Keyboard Tray slides in/out by pushing/pulling.
G
H
5. Attach the Keyboard Panel (C) to the mounting panel with
4 H Screws & 4 G nuts.
56
6. Connect the metal Mouse Pad Bracket to the keyboard tray
using 2 H Screws. Connect the Mouse Pad to the Mouse
Pad Bracket using 2 H Screws & 2 G Nuts.
4A
G
H
Altri manuali Uncaged Ergonomics Accessori per computer
