unication Uni Voice Manuale utente

Tone Alert and Ring Tone Amplifier

Category Model
Alphanumeric Alpha Gold, Alpha Elite and Alpha Gold Plus
Numeric, Two-way messaging NP88, M90 ReFlex
Category Model
Cell phones The UNI MAX device is compatible with most
cellular phones.
Non Unication Pagers The UNI MAX device is compatible with most
pagers.
Other applications:
Unication supported products:
02
Tone Alert and Ring Tone Amplifier

03
Thank you for purchasing Unication’s product, UNI MAX.
UNI MAX will always remind you that your pager has been paged. Its high volume audible alert will
always catch your attention. We sincerely hope you enjoy its capabilities.
This manual can be downloaded from Unication official website:
http://www.unication.com http://www.uni.com.tw
21
1
2
3
4
5
4
3
Base unit UNI MAX
Wall transformer
Dock adapter for the NP 88
numeric pager.
Dock adapter for the Unication
Alpha Gold and Elite pagers.
Two retaining screws are for
installingthe insert.
UNI MAX
wall transformer
screws for dock adapter
dock adapter
for Alpha Gold
dock adapter
for NP-88
5
Package Content
Your UNI MAX package should include the following items:

04
Tone Alert and Ring Tone Amplifier
UNI MAX can be used with pagers or other alerting device such as cell phones.
We’ll introduce you how to install UNI MAX with your alerting device and its key features below.
For best operation, make sure to place the alerting device into its toner alert mode,
or the alert may not be detected.
1. Operation with your Unication Pager:
For best operation, select the correct dock adapter if needed and settle in place to match your Unication pager.
Then simply set the pager into UNI MAX as shown in the illustrations below.
General Information
M90 NP88 Alpha
Gold
Alpha
Elite
Before inserting the right
pager type dock adapter,
please be sure to remove
the screws which are fitted
inside the socket.
After settling the right dock
adapter, please remember to
screw back to secure it.

05
2. Operation with your Cell Phone:
Your Uni Max is also designed to work with most of the popular brands of cellular phones.
Please turn the cell phone to any audible alert mode and then place into the UNI Max.
3. Feature and Function Locations
Phone
Alert time setting
Alert tone selector
Reset
Volume control
For better performance,
please check a best way
to locate the cell phone to
make a better reaction.

06
Tone Alert and Ring Tone Amplifier
Your UNI MAX can use three separate power sources. Using the wall transformer supplied with the unit,
installing the optional rechargeable battery pack. Or you can install the standard AA alkaline batteries only.
The UNI MAX will operate normally from the wall transformer, but if the main power is interrupted, the UNI
MAX will automatically switch over to the rechargeable batteries.
NOTE:
(1) The UNI MAX will only recharge the optional Unication rechargeable battery pack.
You can use rechargeable batteries and still leave the wall transformer connected.
(2) Do not use standard AA batteries and still leave the wall transformer connected.
Charging UNI MAX

07
1. Connecting to the Wall Transformer
2. Installing the Rechargeable Battery Pack
You can select to use rechargeable battery pack as the main power source. You can
connect the wall transformer additionally, and then the rechargeable battery pack will be
used as a backup power source. Before installing the rechargeable battery pack, you can
remove the wall transformer if needed.
Connect the power cable to the UNI MAX and then plug the AC transformer into the
electrical socket (90-240VAC).
When the UNI MAX is powered, the GREEN power LED will illuminate.

08
Tone Alert and Ring Tone Amplifier
Step1: Remove the retaining screw in the battery door and then lift off the battery compartment cover.
Step2: Then simply insert the pin connector from Battery Pack into the mating connector inside
the battery compartment of the UNI MAX unit.
Step3: Reinstall the battery cover and the fastener, and then you can reinstall the wall transformer
if needed. After the batteries are inserted, the GREEN Power LED will automatically light.
NOTE:
To avoid the risk of electrical shock, DO NOT alter the charging or charge batteries other than
the battery pack intended for this unit.
Socket

Step3: Reinstall the battery cover and the fastener. After the batteries are inserted,
the GREEN Power LED will automatically light and flash.
NOTE:
For best operation, please unplug the wall transformer before using the alkaline batteries. 09
3. Installing the Alkaline Batteries
You can select to install 3 standard AA alkaline batteries as the main power source alone.
Step1: Remove the retaining screw in the battery door and then lift off the battery
compartment cover.
Step2: Observing the correct polarities, and please insert the normal batteries into
the UNI MAX battery compartment accordingly.

10
Tone Alert and Ring Tone Amplifier
3. LED Indicator
Action With wall transformer Meaning
Green Yes The main power status is normal.
Orange Yes Rechargeable batteries are low and charging.
Red Yes Rechargeable batteries have problem,and can’t be
charged.
Green flash No The batteries are normal.
Red flash No The batteries are low.
No No No power
LED indicator will help you to identify the status of UNI MAX.
Altri manuali per Uni Voice
1
Indice

















