Unilumin Uslim-O Series Manuale utente
Uslim-O Product Manual
I
Revision Records
Version
Revised Content
Date
01
Initial release
Apr. 29, 2019
02
Add disclaimer
Update address
Update product specifications
Update maintenance method
Mar.24,2020
03
Update the drawing on page 8
June 29, 2020
04
Update to Knob Edition
Jan. 07, 2021
The manual may be modified without any prior notice.
Uslim-O Product Manual
II
Instructions
Thank you for choosing our product. Please read the Product Manual carefully before
using the product. The manual may contain errors despite all our efforts, and may be
subject to change without prior notice. Contact us if you have any questions or
suggestion when using themanual.We will try our bestto help you resolve the problems
in time, and highly appreciate your suggestions.
`
Copyright
The manual is the property of Unilumin Group Co., Ltd. The Unilumin LED’s operating
software is developed based on the Windows operating system. No part of the manual
can be transcripted, transmitted, reproduced, translated, edited, published, stored to a
retrieval system, or used in any form by any individual or organization without a prior
written permission of Unilumin.
Trademark
is the registered trademark of Unilumin Group Co., Ltd.
Uslim-O Product Manual
III
Read the following content carefully to ensure correct use of the LED
display products:
WARNING!
The LED display may be damaged and become irreparable if you ignore the following
warnings.
1) Do not place the LED display upside down or throw it during transport and storage.
2) Do not incline, scratch, or crash the LED display during installation.
3) Do not place or use the LED display in an environment with volatile, corrosive or
flammable chemical products.
4) Do not plug the power connector or socket before switch off the power.
5) Do not clean the LED display with chemical solvents.
6) Do not use any electrical accessories not approved by the equipment manufacturer.
7) You must install a lightning protection system to prevent the abrupt accident.
8) Make sure the LED display and its auxiliary devices must be grounded correctly
and reliably before they are used.
9) Switch off the power immediately and contact the professional personnel when the
LED display has any abnormal conditions such as peculiar smell, smoke, electric
leakage, and abnormal temperature.
Uslim-O Product Manual
IV
CAUTION!
The optimum displaying effect may fail to be achieved if you ignore the following
cautions.
1) Wear antistatic gloves when installing or repairing the product.
2) Ensure good ventilation for the LED display when designing the heat dissipation
solution.
3) Keep the storage environment of the LED display ventilated and dry, with a
humidity not exceeding 95%.
4) Use single-phase power supply for an LED display with the total power
consumption not exceeding 3 kW, and three-phase power supply for an LED
display with the total power consumption exceeding 3 kW.
5) Installing the LED display in the following places may result in an equipment failure
and reduce its lifespan: near the sea, in an area with salt and alkali or sulphurous
gases, near a kitchen exhaust position, or at a place where the difference between
indoor and outdoor temperatures is great. Consult our professional personnel at
the service center if the LED display must be installed in any of these places.
Uslim-O Product Manual
V
Contents
.......................................................................................................................1
Chapter 1 Product Introduction ........................................................................1
1.1 Features...................................................................................................1
1.2 Cabinet Appearance ................................................................................2
1.3 Specification.............................................................................................3
1.4 System Solution.......................................................................................4
1.5 Scope of Application ................................................................................5
Chapter 2 Installation and Wiring.....................................................................6
2.1 Out-of-Box Inspection ..............................................................................6
2.2 General Installation..................................................................................6
2.2.1 Installation of Fixed Front-maintenance Cabinet................................6
2.2.2 Front Maintenance Structures............................................................9
2.3 Wiring for LED Display.......................................................................... 10
2.3.1 Common Cables.............................................................................. 10
2.3.2 Signal Cable Connection..................................................................11
2.3.3 Power Cable Connection................................................................. 12
2.3.4 Smart Control Distribution Box........................................................ 13
Chapter 3 LED Display Control Setting......................................................... 15
3.1 Power-on Testing .................................................................................. 15
3.2 Preparation............................................................................................ 16
3.2.1 Starting the Hardware...................................................................... 16
3.2.2 Installing the Software ..................................................................... 16
3.3 Display Configuration............................................................................ 17
3.4 Brightness Adjustment.......................................................................... 21
3.4.1 Manual Adjustment.......................................................................... 22
3.4.2 Schedule Adjustment....................................................................... 23
3.4.3 Auto Adjustment............................................................................... 25
3.5 Correction Coefficient Management ..................................................... 32
3.5.1 Setting Coefficients for a New Receiving Card ............................... 34
3.5.2 Setting Coefficients for a New Module ............................................ 37
Uslim-O Product Manual
VI
3.6 Pre-storing Picture ................................................................................ 40
Chapter 4 LED Display Playing Setting......................................................... 42
4.1 Selecting a Playing Solution ................................................................. 42
4.2 Playing Setting...................................................................................... 43
4.2.1 Display Window Setting................................................................... 43
4.2.2 Startup Setting................................................................................. 44
4.3 Editing Professional Playing Solution ................................................... 45
4.3.1 Editing the Time Segment ............................................................... 45
4.3.2 Editing the Program Page ............................................................... 47
4.3.3 Editing the Display Window............................................................. 50
4.3.4 Editing the Media............................................................................. 53
4.3.5 Playing the Media............................................................................ 57
4.4 Saving and Opening a Playing Solution ............................................... 59
Chapter 5 Startup, Shutdown, and Maintenance.......................................... 60
5.1 Startup Sequence ................................................................................. 60
5.2 Shutdown Sequence............................................................................. 60
5.3 Maintenance.......................................................................................... 60
5.4 Warm-up Operation............................................................................... 61
5.4.1 Setting the Prestored Picture........................................................... 61
5.4.2 Ageing.............................................................................................. 62
5.4.3 Display Brightness and Ageing Time table...................................... 63
Chapter 6 Troubleshooting and Component Replacement........................... 64
6.1 Common Faults and Troubleshooting Methods.................................... 64
6.1.1 Failure in Lighting up the Display .................................................... 64
6.1.2 Incomplete Picture or Incorrect Position of Picture Displayed ........ 64
6.1.3 Screen Blinking................................................................................ 65
6.1.4 Blinking of a Cabinet in the Display................................................. 65
6.1.5 Failure in Lighting up of a Cabinet in the Display............................ 65
6.1.6 Failure in Lighting up Part of the Modules in the Cabinet ............... 66
6.2 Replacement of Main Components ...................................................... 66
6.2.1 Maintenance of Front-Maintenance Cabinets ................................. 66
Chapter 7 Packaging Transportation and Storage........................................ 71
Uslim-O Product Manual
VII
7.1 Packaging ............................................................................................. 71
7.2 Transportation....................................................................................... 71
7.3 Storage.................................................................................................. 71
Chapter 8 After-Sales and Warranty ............................................................. 72
8.1 The Warranty Terms.............................................................................. 72
8.2 Warranty Period .................................................................................... 72
8.3 Warranty Service................................................................................... 72
8.3.1 Warranty service type...................................................................... 72
8.4 Disclaimer ............................................................................................. 73
8.5 Warranty service process...................................................................... 74
8.6 Other..................................................................................................... 75
Attachment 1 - Product Warranty Card....................................................... 76
Contact Information....................................................................................... 77
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Unilumin Monitor
