Unisys My VisionX Manuale utente
Operator Manual
imagine it. done.
Cover unisys 22-09-2006 9:12 Pagina 1
Unisys MyVision X
Operator Manual
OM_Unisys.qxd 22-09-2006 9:13 Pagina 1
CONTENTS
0. Preface
1. General
1.1 Audience
1.2 Safety precautions
1.3 If the machine is damaged
2. Learning about the Unisys MyVision X
2.1 Packaging list
2.2 External parts description
2.3 Internal parts description
3. Operating your Unisys MyVision X
3.1 Document support installation
3.2 Extension plate installation
3.3 Power cables connection
3.4 USB2 cable connection
3.5 HP C6602A Ink jet cartridge installation
3.6 Pocket length adjustment
Page 2
OPERATOR MANUAL Preface
OM_Unisys.qxd 22-09-2006 9:13 Pagina 2
4. Getting started
4.1 Status lights
4.2 How to prepare and load checks
4.3 Clearing jams
5. Maintenance
5.1 Cleaning the transport
5.2 Cleaning the Contact Image Sensors
5.3 Cleaning the HP C6602A ink jet cartridge
5.4 Cleaning photocells detector
5.5 Replacing the feeder and separator rollers
5.6 Cleaning the reading transport belt
5.7 Install the external covers
6. Specifications
6.1 Technical specifications of the Unisys MyVision X
6.2 Technical specifications of the PC
Page 3
OPERATOR MANUAL Preface
OM_Unisys.qxd 22-09-2006 9:13 Pagina 3
Page 4
OPERATOR MANUAL Preface
NO WARRANTIES OF ANY NATURE ARE EXTENDED BY THIS DOCUMENT. Any product or related information described
herein is only furnished pursuant and subject to the terms and conditions of a duly executed agreement to purchase or lease
equipment or to license software. The only warranties made by Unisys, if any, with respect to the products described in this
document are set forth in such agreement. Unisys cannot accept any financial or other responsibility that may be the result
of your use of the information in this document or software material, including direct, special, or consequential damages.
You should be very careful to ensure that the use of this information and/or software material complies with the laws, rules,
and regulations of the jurisdictions with respect to which it is used.
The information contained herein is subject to change without notice. Revisions may be issued to advise of such changes
and/or additions.
Notice to U.S. Government End Users: This is commercial computer software or hardware documentation developed at private
expense. Use, reproduction, or disclosure by the Government is subject to the terms of Unisys standard commercial license
for the products, and where applicable, the restricted/limited rights provisions of the contract data rights clauses.
© 2006 Unisys Corporation. All rights reserved.
The Unisys MyVision X is CE compliant and it has been tested in
accordance with the requirements of the CEE directive N 89/336
The Unisys MyVision X is UL 950 compliant.
OM_Unisys.qxd 22-09-2006 9:13 Pagina 4
Page 5
OPERATOR MANUAL Preface
FCC Statement
The statement below is included in this document to comply with a Federal Communications Commission (FCC) regulation.
The FCC is an agency of the United States government; thus, the statement below applies to computing equipment installed
in the United States of America. Unisys is taking appropriate steps to be in compliance with FCC regulations and similar
regulations of other countries.
WARNING: This equipment has been tested and found to comply with the limits for a Class A device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required
to correct the interference at his own expense.
Unisys is a registered trademark of Unisys Corporation in the United States and other countries. Panini, MyVision X, and MICR
Plus are trademarks of Panini SpA. All other brands and products referenced in this document are acknowledged to be the
trademarks or registered trademarks of their respective holders.
OM_Unisys.qxd 22-09-2006 9:13 Pagina 5
O. Preface
Here is an overview of the manual layout:
Chapter 1: “General” introduces you to all the general information regarding the manual or the
Unisys MyVision X.
Chapter 2: “Learning about Unisys MyVision X” introduces you to all the major components of
your machine.
Chapter 3: “Operating your Unisys MyVision X” describes simple installation procedures.
Chapter 4: “Getting started” explains how to operate the MyVision X.
Chapter 5: “Maintenance” describes how to solve problems that you may encounter using this
machine.
Chapter 6: “Specifications” lists the main functions of the MyVision X and the features of the PC.
Page 6
OPERATOR MANUAL Preface
OM_Unisys.qxd 22-09-2006 9:13 Pagina 6
1. General
Congratulations on your selection of the Unisys MyVision X!
The Unisys MyVision X is a new generation of check scanners.
With a small footprint, sleek design and quiet operation, the Unisys MyVision X fits perfectly in a small
area such as a teller window, or on the back counter of bank branches.
The Unisys MyVision X incorporates the latest, state-of-the-art technology and the latest standards for
check processing in the marketplace.
A unique, patent-pending 3-mode feeder can be found in the Unisys MyVision X, allowing for single item
feeding, up to 30 items batch feeding with single hand insertion (in this case it is always possible to insert
documents with one hand only) or up to 100 items batch insertion by manually moving the pressure plate.
Options with limited feeder capacity are also available to cover specific customer needs.
MICR reading technology available with the Unisys MyVision X is comparable to the larger and faster
reader sorter, thanks to the Panini MICR PlusTM technology.
Taking advantage of the most up to date technology, the Unisys MyVision X connects to computers via
USB2.0 interface, allowing for fast data transfer at no additional cost.
A rear ink jet endorser can also be found on the Unisys MyVision X.
The Panini Vision API is standard on the MyVision X, guaranteeing easy and reliable software integration.
Finally, the Unisys MyVision X has been designed specifically to allow for entire track accessibility,
including scanner area (patent pending), for easy intervention and for maintenance purposes.
Page 7
OPERATOR MANUAL General
OM_Unisys.qxd 22-09-2006 9:13 Pagina 7
1.1 Audience
1.2 Safety Precautions
This manual is written primarily for personnel who process checks or other documents.
Page 8
OPERATOR MANUAL General
Before you begin operating or servicing your MyVision X as instructed in this manual, please make sure
you read and understand these important safety instructions.
• Dress safely. Do not wear loose clothing, long hair or jewelry that can become entangled in moving parts.
• Do not allow anything to rest on the power cord. Do not locate the MyVision X where people may
walk on the cord.
• Always unplug the MyVision X before cleaning.
• Do not attempt to service or repair the MyVision X, except as instructed elsewhere in this manual.
• Attempting to service or repair the external power supply of the MyVision X may expose you to
dangerous voltage points or other risks.
• Refer all servicing to qualified service personnel.
OM_Unisys.qxd 22-09-2006 9:13 Pagina 8
1.3 If the Machine is Damaged
Unplug the MyVision X from the wall outlet and refer servicing to qualified personnel under the following
conditions:
• If the power cord is damaged or frayed.
• If liquid has been spilled into the product.
• If the equipment has been exposed to rain or water.
• If the equipment does not operate normally when the operating instructions are followed.
• If the equipment has been dropped or damaged.
• If the equipment exhibits a distinct change in performance, indicating a need for service.
Adjust only those controls and replace only those items that are covered by the instructions in this manual.
If you attempt to make adjustments not covered in this manual, you may damage the
equipment and void the warranty.
Unauthorized adjustments or repairs may result in the need for extensive work by a qualified technician
to return the equipment to its proper working condition.
Page 9
OPERATOR MANUAL General
OM_Unisys.qxd 22-09-2006 9:13 Pagina 9
Indice
Altri manuali Unisys Scanner
