Unit UTi720E Manuale utente

UTi720E/ UTi730E

Professional Thermal Imager

User Manual

Professional Thermal Imager User Manual

Preface

Dear user：

Thank you for selecting the brand new UNI-T E Series Infrared Thermal Imaging Device. In order

to use this product correctly, please read the full text of this manual carefully before using, especially

the part about "Safety Precautions".

If you have read the full text of this manual, it is recommended to keep this manual properly with

the accessories of the thermal imaging device or in a place where you can refer to it at any time for

future use.

Limited warranty and limited liability

Our company guarantees that the product is free from defects in material and workmanship for

one year from the date you purchase it. For the warranty, it does not cover the damage caused by

accident, negligence, misuse, modification, contamination or abnormal operation or handling etc.. The

Distributor shall not be entitled to give any other guarantee in the name of the Company. If you need

warranty service during the warranty period, please contact the authorized service center nearby to

obtain the product returning authorization information; andthen send the product to the service center

with the product problem description.

This guarantee is the only compensation you can get. Otherwise, the Company does not provide

any warranty, express or implied, like the implied warranty for the particular purpose. Meanwhile, the

Company shall not be liable for any special, indirect, incidental or consequential damage or loss arising

out of any cause or conjecture whatsoever. For some states or countries do not allow limitations on

implied warranties and incidental or consequential damages, the above limitations and requirements

may not apply to you.

Professional Thermal Imager User Manual

Contents

1. Performance indicators....................................................................................................4

2. Structure ..........................................................................................................................6

3. Display instructions..........................................................................................................7

4. Power on-off.....................................................................................................................7

5. Instruction of configuration menu ....................................................................................8

6. Marking tool .....................................................................................................................8

7. Image mode.....................................................................................................................9

8. Swatches switching .........................................................................................................9

9. Temperature measuring tool............................................................................................9

10. Vitta tool ....................................................................................................................... 11

11. Photo view and edit...................................................................................................... 11

12. Digital amplification & fusion ratio adjustment.............................................................12

13. System setup ...............................................................................................................12

13.1 Camera mode.....................................................................................................12

13.2 Units ...................................................................................................................13

13.3 Parameters .........................................................................................................13

13.4 Alarm ..................................................................................................................14

13.5 QR CODE...........................................................................................................15

13.6 Language............................................................................................................15

13.7 Date and time .....................................................................................................16

13.8 Wi-Fi ...................................................................................................................16

13.9 USB mode ..........................................................................................................16

13.10 Brightness.........................................................................................................16

13.11 Automatic Shutdown.........................................................................................17

13.12 Factory reset ....................................................................................................17

13.13 Formatting ........................................................................................................17

13.14 About ................................................................................................................18

14. SD Card .......................................................................................................................18

15. Maintain .......................................................................................................................18

16. Safety precautions.......................................................................................................18

17. FCC Compliance statement ........................................................................................19

18. Common emissivity table.............................................................................................19

Professional Thermal Imager User Manual

1. Performance indicators

UTi720E:

Mode

Low temperature scale (-20℃~ 150℃)

High temperature scale (0℃~ 550℃(manual selecting scale)

Thermal imaging pixel

256*192（49152）

IFOV

3.8mrad

Focal length

3.2mm

Sensitivity

<50mK @25℃

Frame frequency

<25Hz

Precision

-10℃~550℃, room temperature of 25℃, and ±2℃/±2% to take the

maximum value

Temperature measurement

scale

- 20℃~ 550℃(-4℉~1022℉)

UTi730E:

Mode

Automatic gain

Thermal imaging pixel

320*240（76800）

IFOV

3mrad

Focal length

4.0mm

Sensitivity

<65mK @25℃

Frame frequency

9Hz

Precision

-10℃~400℃, room temperature of 25℃, and ±2℃/±2% to take the

maximum value

Temperature measurement

scale

-40℃~400℃（-40℉~752℉）

UTi720E/UTi730E：

Sensor

Un-cooled vanadium oxide

Display resolution

640*480

Emissivity

0.95（default）0.01~ 1.00

Visible light pixel

2 million

Thermal imaging pixel size

12μm

Swatches

Iron red, rainbow, black heat, white heat, red heat, lava, and high

contrast rainbow

Infrared spectral bandwidth

8~14μm

Field of view

HFOV 56°

Professional Thermal Imager User Manual

Focusing mode

Free Focus

Digital zoom

2x,4x

Temperature Sweep

5 points,3 rectangles,3 circles, and1 line (add up to 6)

Vitta tool

Automatic isothermal, proportional isothermal, downward isothermal,

upward isothermal, interval isothermal, and manual isothermal

Temperature display

Center point temperature, and high/low temperature tracking

Temperature measurement

unit

℃(default)、℉、K

High and low temperature

alarm

Yes (LED lighting alarm, and LCD animation alarm)

Image mode

Thermal imaging, visible light, fusion, and picture in picture

Image capture mode

Take pictures, and automatically take pictures

Image save format

JPG

Image browse

Temperature analysis, changingswatches, and remarks

QR code scanning

Yes

USB communication

Type-c USB (Charging, real-time image and USB disk storage)

WIFI

Yes

PC projection screen

Yes

PC analysis software

Yes (live image, photo download and analysis)

Mobile phone APP

Yes (Photo download and analysis)

LED lighting

Yes

Language

English/French/German/Spanish/Russian

Authentication

CE FCC UKCA ROHS

Operation temperature

0℃~ 50℃(32℉~ 122℉)

Storage temperature

-10℃~ 60℃(14℉~ 140℉)

Operation humidity

10%~95%RH（Non - Condensing）

Battery

5200mAh(Detachable battery pack)

Auto Power -Off

Yes

Service duration

More than 3 h

Charging period

Less than 4h

Charging voltage/current

5V/ 1.5a 9V/1A 12V/1A

(supported only with standard USB charging below QC2.0)

Image saving

The microSD card supporting 32 GB for maximum

IP level

IP54 ( IEC 60529:1989+A1:1999+A2:2013 )

Drop height

Professional Thermal Imager User Manual

2. Structure

No.

Description

No.

Description

The USB Type - C interface

Photo browsing button

Upper casing

Back key

Lower casing

Right key

SD card slot

SET key

Interface protection cover

Down key

LCD display

Bracket fixed screw hole

Start key

Infrared thermal image window

Lighting key

Lamp

Left key

Visible light camera window

Up key

Photo trigger key

Professional Thermal Imager User Manual

3. Display instructions

Displayresolution: 640×480

No.

Description

No.

Description

Marking tool

Automatic tracking of the minimum point

Image mode

Color temperature bar

Swatches switch

Upper limit of swatchesscale

Temperature measuring tool

Electric quantity

Vitta tool

Temperature of the measurement central

point

System setup

Automatic tracking of the maximum point

Lower limit of swatchesscale

Temperature measurement central point

4. Power on-off

Long press the "Power button" for 5 seconds to start up the thermal imaging device (if start up the

device just now, the device is not being used for a long time or after the measurement environment

changes, it will take up 30 minutes for starting up the device to measure the temperature). Long press

the "Power button" for 5 seconds to turn off the thermal imaging device. When the thermal imaging

device is in low power mode, the reminder of low power will pop up. At this time, the thermal imaging

device needs to be turned off to charge. When the thermal imaging device is in low power mode all the

time, the thermal imaging devicewill automatically be shut down.

Professional Thermal Imager User Manual

5. Instruction of configuration menu

Configuration options for main menu

Main page of the thermal imaging device

1. Press “SET key” on the home page to display the main menu

2. Press“Left/right key” to select sub-menu

3. Press“SET key” to enter the corresponding sub-menu

4. Press “Left/right key” to select sub-menu Settings

5. Press “SET key” to select Settings

6. Press “Back key” to return to the previous level and save the Settings

7. Press "Back key" again to return to the home page of thermal imaging

Main menu:

Sub-menu:

6. Marking tool

If you need to use the center point/high/low temperature tracking/temperature display

function,press "SET key" to pop up the main menu options, select "Marking tool" by using left/right key,

and then press "SET key" to enter the marking tool sub-menu options and make selection byusing

left/right key. (For example: Press "SET key" to select "Center point". When cross collimation appears,

it means that the center point cursor is opened. Press "SET key" again, the cross collimation

disappears, indicating that the function of the center point cursor is closed.

Professional Thermal Imager User Manual

7. Image mode

Press "SET key" to pop up the main menu, select "Image mode" by using"Left/right key", and then

press "SET key" to enter the sub-menu options of image mode. You can make selection byusing

left/right key. For example, press"SET key" to select "Thermal imaging" to switch the image to thermal

imaging mode. (In the fusion mode, you can adjust the fusion ratio by using"Left/right key" and adjust

the fusion distance by using"Up/down key". In picture in picture mode, you can change the position

and size of the picture in picture by selecting Move or Stretch by using"Left/right key". Press "SET key"

to select "QR code", you can manually enter the QR code or scan the code to obtain QR code, and

select "Cancel" to return to the main page).

8. Swatches switching

Press the "SET key" to pop up the main menu options, select "Swatches Switch" by using

"Left/right key", select the required swatches by using "Left/right key", and there are seven swatches

available: white hot, red hot, iron red, black hot, high rainbow, lava, and rainbow.

9. Temperature measuring tool

Press the "SET key" to pop up the main menu options, select "Temperature measuring tool" by

Professional Thermal Imager User Manual

using "Left/right key". By using "Left/right key",select the analysis object type (including point

temperature measurement, line temperature measurement, rectangle, and circle) and select the target

(this function can be used only when the analysis object is added on the home page). Clear all and

preset tools.

Press"SET key" to add point, line, rectangle and circle temperature measurement analysis objects,

and the sub-menu bar of "Select thetarget" will pop up automatically. Select the required functions by

using "Left/right key", including following functions: select, move, stretch (for the point temperature

measurement analysis object, it cannot be stretched), comparing (for the point temperature

measurement analysis object, it can only be compared with point temperature measurement analysis

object, and corresponding comparison information will be displayed on the right after comparison), and

delete (only the currently selected temperature measurement analysis object can be deleted). After

adding the temperature measurement analysis object, the corresponding temperature information will

be displayed on the left side. When select the line temperature measurement analysis object, the

temperature curve of the line area will be displayed in the lower left corner.

After pressing"SET key" to clear all functions, all temperature measurement analysis objects on

the current page will be cleared. If there is the temperature measurement analysis object on the home

page, press "SET key" to select the preset tool, and the "Save Tool" prompt box will pop up. If you

select OK, the current analysis object will be saved and the preset tool can be used next time. If there

is no temperature analysis object on the home page, press"SET key" to select the preset tool, and the

Read Tool dialog box will be displayed. If you select OK, the preset tool saved last time will be added

to the home page.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Unit Telecamera termica

Unit

Unit UTi712S Manuale utente

Unit

Unit 165H Manuale utente

Unit

Unit UTi165A Manuale utente

Unit

Unit UTi85A Manuale utente

Manuali Telecamera termica popolari di altre marche

Hikmicro

Hikmicro B20 Manuale utente

FLIR

FLIR E-EST Series Manuale utente

FLIR

FLIR M-Series Manuale utente

BST

BST BT-72 Manuale utente

FLIR

FLIR G300 pt Series Manuale utente

CBC

CBC EN7-S02T Manuale utente

Satir

Satir YRH600 Manuale utente

TESTO

TESTO 882 Manuale utente

TECPEL

TECPEL TIG-320 Manuale utente

SKF

SKF TKTI 21 Manuale utente

TESTO

TESTO 885 Manuale utente

InfiRay

InfiRay AT300 Series Manuale utente

InfiRay

InfiRay AT Series Manuale utente

FLIR

FLIR X6530sc Series Manuale utente

Videotec

Videotec MAXIMUS MVXT Manuale utente

Guide Sensmart

Guide Sensmart D384M Manuale utente

NBN

NBN FLIR A6 Series Manuale utente

WORKSWELL

WORKSWELL SAFETIS Manuale utente