4
B ttery Inform tion
Ch rging the B ttery
Your uDirect has an internal,
rechargeable battery. To
charge it, connect the mini
USB into the uDirect, then
plug the charger into a
power outlet. You can also
use the optional USB cable
and charge your uDirect via a USB port of a computer.
For safety reasons, recharge the battery only with
chargers supplied by Unitron.
During the charging process, the battery light will turn
orange. Once the battery is fully charged, the indicator
will turn green.
Charging an empty battery takes approximately 90
minutes. It is safe to leave the charger connected
overnight – the battery cannot be overcharged.
Wh n charging your uDir ct for th first tim , allow it
to charg for at l ast 3 hours, v n if th batt ry
light turns gr n aft r 90 minut s. Allow th batt ry
to fully charg and discharg for a minimum of 3
cycl s.
A new battery’s full performance is achieved only after
two or three complete charge and discharge cycles.
