Unitronics Vision OPLC V130 Manuale utente

Altri manuali per Vision OPLC V130

1

Indice

Altri manuali Unitronics Controllori

Unitronics

Unitronics Samba SM70-J-TA22 Manuale utente

Unitronics

Unitronics Vision 230 Manuale utente

Unitronics

Unitronics Vision V130-33-R34 Manuale utente

Unitronics

Unitronics Jazz JZ10-11-R16L Manuale utente

Unitronics

Unitronics Samba OPLC SM43-J-R20 Manuale utente

Unitronics

Unitronics V280 Manuale utente

Unitronics

Unitronics V130-33-TR6 Manuale utente

Unitronics

Unitronics Vision V350-35-TU24 Manuale utente

Unitronics

Unitronics Vision OPLC V130-33-B1 Manuale utente

Unitronics

Unitronics UniStream Built-in Series Manuale utente

Unitronics

Unitronics Vision OPLC V130-J-TR20 Manuale utente

Unitronics

Unitronics Vision OPLC V130-33-TA24 Manuale utente

Unitronics

Unitronics Jazz OPLC JZ20-T40 Manuale utente

Unitronics

Unitronics UniStream USC-C3-R20 Manuale utente

Unitronics

Unitronics Samba OPLC SM43-J-R20 Manuale utente

Unitronics

Unitronics UniStream USC-B3-R20 Manuale utente

Unitronics

Unitronics Vision V130J-TR34 Manuale utente

Unitronics

Unitronics Vision V130-J-TA24 Manuale utente

Unitronics

Unitronics Uni-COM UAC-CB-01RS2 Manuale utente

Unitronics

Unitronics M91-19-R1 Manuale utente

Unitronics

Unitronics V120-22-R34 Manuale utente

Unitronics

Unitronics Vision V130-TR6 Manuale utente

Unitronics

Unitronics M90 OPLC Manuale utente

Unitronics

Unitronics Vision V350-35-T2 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente

Headquarters

Unitronics (1989) (R"G) Ltd.

Unitronics Building, Airport City

P.O.B. 300, Ben Gurion Airport, Israel 70100

Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877

From: Barak Illouz e-mail: Page:1Of:2Size: 141312 eSignature:1303-279-21(BI) Date Created: 1-Oct-09

File Name: Z:\HW\Doc\Mechanic\Replacing guide\Replacing a V130 Display.doc Date Printed: 1-Oct-09

Replacing a V130 Display

Before performing these actions, touch a grounded object to discharge

any electrostatic charge.

Avoid touching the PCB board directly. Hold the PCB board by its connectors.

Opening the Controller

1. Turn off the power supply, disconnect, and dismount the controller.

2. The back cover of the controller comprises 4 screws, located in the corners.

Remove the screws, and pull off the back cover.

3.

Hold the I/O PCB board by its top and bottom connectors and steadily pull

the board off.

4. Remove the plastic tabs marked X and Y.

5. Remove the keypad ribbon cable shown in the next figure.

Press the sides of the cable connector and pull it slightly upwards; this releases the cable.

Pull the cable from the connector.

Headquarters

Unitronics (1989) (R"G) Ltd.

Unitronics Building, Airport City

P.O.B. 300, Ben Gurion Airport, Israel 70100

Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877

From: Barak Illouz e-mail: Page:2Of:2Size: 141312 eSignature:1303-279-21(BI) Date Created: 1-Oct-09

File Name: Z:\HW\Doc\Mechanic\Replacing guide\Replacing a V130 Display.doc Date Printed: 1-Oct-09

6. Locate the two screws that fasten the CPU board to the controller and remove them.

7.

Hold the main board by Port 1 and by the I/O expansion port, and pull it out of

8. Locate the two screws that fasten the LCD display to the plastic panel and remove them.

9. Remove the LCD display.

Closing the Controller

1. Replace the new LCD display in the correct location, including the fastening screws.

2. Replace the CPU board, including the fastening screws.

3. Replace Keypad ribbon cable, and verify if the cable connectors are locked.

4. Replace the plastic tabs marked X and Y in the correct location.

5. Replace the I/O board.

6. Close the controller by snapping the plastic cover back in its place. If the card is

placed correctly, the cover will snap on easily.

7. Replace the screws in the corners of the back cover.