Upgrading everyday security SecuPlace WiFi Manuale utente
Quick Start Guide
Visit us on the Web: www.riscogroup.com
For detailed installation and system information,
refer to the full installation manual at:
http://www.riscogroup.com/products/products/953
iOS app Android app RISCO Group website
SecuPlace WiFi
2
Table of Contents
GETTING STARTED.......................................................................................................4
KIT COMPONENTS.............................................................................................................4
EXPANDING YOUR SYSTEM..................................................................................................4
SYSTEM INSTALLATION.......................................................................................................4
IMPORTANT SAFETY PRECAUTIONS ............................................................................5
INITIAL SYSTEM SETUP ................................................................................................6
STEP 1: SIM INSTALLATION AND CONTROL PANEL WIRING .........................................7
INSTALLING THE SIM CARD.................................................................................................7
WIRING AT THE CONTROL PANEL .........................................................................................8
STEP 2: INSTALLING THE CONTROL PANEL.................................................................11
MOUNTING GUIDELINES ..................................................................................................11
INSTALLATION PROCEDURE ...............................................................................................12
STEP 3: POWERING-UP THE CONTROL PANEL............................................................13
STEP 4: SELECTING A LANGUAGE...............................................................................14
STEP 5: REGISTERING COMPONENTS.........................................................................15
REGISTERING KIT COMPONENTS ........................................................................................15
LISTING OF COMPONENT/ZONE INFORMATION ....................................................................15
REGISTERING ADDITIONAL COMPONENTS ............................................................................16
REGISTERING KEYFOBS.....................................................................................................16
DELETING COMPONENT REGISTRATIONS..............................................................................17
DELETING KEYFOB REGISTRATIONS .....................................................................................17
STEP 6: INSTALLING KIT COMPONENTS .....................................................................18
PRE-INSTALLATION PLANNING...........................................................................................18
INSTALLING THE MAGNETIC DOOR /WINDOW CONTACT DETECTOR.........................................19
Mounting Guidelines.............................................................................................19
Installation Procedure ...........................................................................................20
INSTALLING THE PIR DETECTOR .........................................................................................23
Mounting Guidelines.............................................................................................23
Installation Procedure ...........................................................................................24
STEP 7: TESTING THE SYSTEM....................................................................................26
PERFORMING A KEYFOB TEST ............................................................................................26
PERFORMING A WALK TEST FOR DETECTORS........................................................................26
STEP 8: DEFINING SYSTEM USERS..............................................................................27
3
ASSIGNING,EDITING,AND DELETING USERS (USER CODES).................................................... 28
DESIGNATING A FOLLOW ME NUMBER .............................................................................. 29
STEP 9: ESTABLISHING SYSTEM COMMUNICATION .................................................. 29
COMMUNICATION CHANNELS........................................................................................... 29
Connecting to GPRS / GSM ................................................................................... 29
Editing the APN..................................................................................................... 30
CONNECTING TO WIFI..................................................................................................... 31
Selecting your WiFi Network: ............................................................................... 31
Changing the WiFi Network.................................................................................. 31
STEP 10: CONNECTING TO RISCO CLOUD .................................................................. 32
REGISTERING TO RISCO CLOUD........................................................................................ 32
LOGGING IN TO RISCO CLOUD ......................................................................................... 33
OPERATING THE SYSTEM .......................................................................................... 34
BEFORE YOU START USING THE SYSTEM ............................................................................. 34
Describing the Control Panel Keypad ................................................................... 34
Describing the Control Panel LEDs........................................................................ 35
Describing the Keyfob LED.................................................................................... 35
Describing the PIR Detector LED........................................................................... 35
Describing User Commands.................................................................................. 36
Describing Arming Modes .................................................................................... 36
PERFORMING COMMANDS FROM CONTROL PANEL AND KEYFOB ............................................. 37
SENDING SMS COMMANDS ............................................................................................. 38
USING THE SMARTPHONE AND WEB APPLICATIONS .............................................................. 39
Smartphone App................................................................................................... 39
Web Application ................................................................................................... 39
TROUBLESHOOTING ................................................................................................. 40
SYSTEM MAINTENANCE — BATTERY REPLACEMENT ................................................ 43
REPLACING KEYFOB BATTERIES ......................................................................................... 43
REPLACING COMPONENT BATTERIES .................................................................................. 44
PRODUCT SPECIFICATION ......................................................................................... 45
CERTIFICATION AND STANDARDS............................................................................. 47
RISCO GROUP LIMITED WARRANTY ......................................................................... 48
CONTACTING YOUR ENGINEER ................................................................................. 51
CONTACTING RISCO GROUP ..................................................................................... 52
4
Getting Started
Kit Components
Control Panel
The control panel communicates with all system
detectors and accessories, with the alarm receiving
centre, and with users via Cloud-based Smartphone
and Web-browser applications.
Detectors
Detectors generate alarm events upon intrusion
detection. Magnetic door / window contact detectors
serve to protect doors and windows, while PIR
(Passive Infra-Red) motion detectors serve to protect
designated zones. A large selection of other (optional)
RISCO Group detectors can also be installed.
Keyfobs
Keyfobs are hand-held mini-remote control
transmitters that enable arming / disarming the system,
sending panic alarms and medical assistance alarms.
Expanding your System
This kit contains the necessary components required to operate your
security alarm system, however you can enhance and customize your
system by adding additional components – up to a maximum of 32
detectors and sensors, 19 keyfobs, 4 repeaters (range extenders), 4 keypads,
and 1 alarm sounder. Visit the RISCO Group website for more information
at: www.riscogroup.com. Also, see Product Specification on page 45 for
further system details.
System Installation
It is recommended to have your system installed by a professional, such as
an alarm system engineer or electrician.
5
Important Safety Precautions
WARNING: Installation or usage of this product that is not in
accordance with the intended methods as described in
the instructional materials and by the supplier can
result in damage, injury, or death.
WARNING: Make sure this product is not accessible by children and
those for whom system operation is not intended.
WARNING: Do not ever attempt to repair your wireless security
alarm system by yourself, as doing so could result in
damage, injury or death. Always contact your
engineer / supplier for repair or maintenance issues.
WARNING: The main panel should be connected to an
easily-accessible electrical wall outlet or disconnection
device, such as a circuit breaker.
WARNING: Electrical power connections to the control panel should
be according to applicable electrical code and
regulations.
WARNING: Do not attempt to replace the battery in the control panel
yourself – always contact your engineer / provider.
WARNING: Ensure a battery is replaced with the correct type and
polarity. Do not recharge, disassemble, deform, expose
to high heat, or incinerate batteries. Failure to observe
these warnings may result in explosion, fire, damage,
injury, or death.
CAUTION: Always dispose of used batteries according to applicable
law and regulations.
6
Initial System Setup
The following steps are required to initially set up your system for
operation:
Step 1: SIM Installation and Control Panel Wiring
Step 2: Installing the Control Panel
Step 3: Powering Up the Control Panel
Step 4: Selecting a Language
Step 5: Registering Components
Step 6: Installing Kit Components
Step 7: Testing the System
Step 8: Defining System Users
Step 9: Establishing System Communication
Step 10: Connecting to RISCO Cloud
7
Step 1: SIM Installation and Control Panel Wiring
WARNING: Make sure the control panel is NOT connected to an
electrical power supply when performing SIM
installation and wiring.
WARNING: Make sure to comply with all applicable electrical code
and regulations.
CAUTION: If your system does not have a SIM card pre-installed,
install it before applying electrical power to the control
panel.
Installing the SIM Card
A SIM card must be installed to enable GPRS communication. Access is
from the back-side of the control panel, which enables the SIM card to be
installed without having to open the panel (see illustration on page 9).
Alternatively, if you have any wiring to be done at the control panel, when
you open the control panel for the wiring tasks, you can also install the SIM
card at the same time.
To install a SIM card:
8
Wiring at the Control Panel
To perform wiring at the control panel:
1. Make sure the control panel is NOT connected to an electrical
power supply, and then open it as follows; both covers remain
connected to each other with a ribbon cable (do not detach):
Remove and retain the screw on the cover.
Release the right and left tabs (left location shown).
Detach the cover from the bottom-facing side.
Detach the cover from the top-facing side.
9
2. At the back side of the control panel, route the AC power cable
through the wiring outlet:
Tamper switch location (on opposite side)
Screw mounting grooves
SIM card access cover
Wiring outlet
Wiring ducts
3. Connect the AC power cable leads to the AC terminals, ensuring
the correct live [L] and neutral [N] wiring, as shown in the
following illustration on page 10.
NOTE: For the AC power cable wiring colors, refer to the
applicable electrical code for the country / region of
installation.
4. Secure the AC power cable onto the PCB using the provided cable
clamp, screw and washer and then route the cable through one of
the wiring ducts:
10
5. At the terminal block connect wire leads for the relevant
connections, as required:
AC power supply terminals
Cable clamp
Terminal block. Connection terminals from left to right:
external module, PGM, zone (for a single hard-wired
peripheral), GND.
6. If the SIM card has not been installed yet, install it now directly
onto the PCB in order to enable GPRS / GSM communication
(see Installing the SIM Card, page 7).
7.
When all control panel wiring and the SIM card installation tasks
are finished, close up the control panel casing. Make sure the tabs
on the cover snap into place into their respective grooves, and then
re-install the small screw back onto the front cover.
8. Mount the control panel onto the wall (see Step 2: Installing the
Control Panel, page 11).
Indice
Altri manuali Upgrading everyday security Sistema di sicurezza
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente