URC Total Control SNP-2 Manuale utente
Owner's anual
SNP-2
Streaming Network
Music Player
SN -2 Owner’s Manual ©2014 Universal Remote Control, Inc.
The information in this Owner’s Manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written consent
from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR O ER-
ATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN
THIS MANUAL.
The information in this Owner’s Manual may be subject to change without prior
notice.
Total Control is a registered trademark of Universal Remote Control, Inc.
Complete Control is a registered trademark of Universal Remote Control, Inc.
URC - Control the Experience is a registered trademark of Universal Remote
Control, Inc.
SiruisXM, Rhapsody, vTuner and andora are all registered trademarks.
All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.
Universal Remote Control,Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
hone: (914) 835-4484 Fax: (914) 835-4532
Page 1
SNP-2 STREA ING NETWORK PLAYER
Congratulations!
Thank you for purchasing the SNP-2 Streaming Network Music
Player! Listen to popular music services like Rhapsody, Pandora,
vTuner, and SiriusXM, as well as your stored music via My Music or
Windows Media Player. ntegrate the SNP-2 with a Total Control
system to listen throughout your home or office, or listen in your
room as a standalone device using Complete Control products.
View, control, and see what is playing from any Total Control
remote, keypad or iOS device. Also use the SNP-2’s HDM output
to view and control its interactive and engaging on-screen interface.
Features and Benefits
• HD I Output
Utilize the SNP-2’s HDM output to enjoy and quickly
navigate through its interactive and colorful onscreen
television experience.
• Streams Popular usic Services
Listen and subscribe to popular music services such as
SiriusXM, Rhapsody, Pandora and vTuner.
• Plays Compatible Network usic
Access stored music via My Music or Windows Media
Player, on your PC, Mac or network attached storage hard
drives. Compatible audio formats include: M 3 (16 kbps to
320 kbps), WMA, ACC, OGG, FLAC (16 & 24 bit and up to
192kHz sample rate), ALAC (Apple Lossless), M4A, and WAV.
• Full Two-way Communication
View song information on your television as well as your
Total Control remote, keypad or mobile device.
• Third-Party Integration
Easily integrate other brands with the SNP-2 by using the
Audio L, R or coaxial outputs.
• Easy rack-mounting
Streamline and organize your SNP-2 along with the rest of
the Total Control system by integrating the optional RMK-1
rack-mounting kit.
Page 2
SNP-2 STREA ING NETWORK PLAYER
Parts Guide
The SNP-2 Streaming Network Player includes:
1 - SNP-2 Streaming Network Player 1 - AC Power Adapter
1 - Power Cord 1 - Ethernet Cable
1 - Owner’s Manual
Page 3
SNP-2 STREA ING NETWORK PLAYER
Front Panel Description
Power LED: ndicates the SNP-2 is connected to power.
Ethernet LED: ndicates the network connectivity status.
●ON = Connected
●OFF = Not Connected
●Blinking = Attempting to connect
Reset Button: The front panel reset button offers a quick way to
power cycle or reset the SNP-2 back to its factory state.
● Power Cycle: Press to turn the unit OFF then back ON
again while retaining your music account information.
(Ie. login and music libraries.)
● Factory State: Pressing and holding for 15 seconds will
revert the SNP-2 back to its factory state while also
removing your music account information. (Ie. login and
music libraries.)
Power
Ethernet
Reset
Page 4
SNP-2 STREA ING NETWORK PLAYER
Rear Panel Description
Power 12V (3.5A): The power socket accepts either UL/CSA
approved 110V power cords or CE approved 220V power cables to
be used with the power supply. The power supply automatically
switches when connected to either 100V or 240V.
LAN: A 10/100 LAN connection ensures that the SNP-2 sends a
network stream to the DMS amplifiers. Also receives streams from
popular music services and networked hard drives.
Control IR IN: Connect a URC RF base station to control the SNP-2
with a one-way URC remote control.
HD I Output: HDM , 1.4A compatible, contains both digital
audio and digital video signals.
Coaxial Digital Audio Output: Connect to a coaxial digital input of
a device to enjoy digital quality music.
Analog Audio (L, R): Connect to the analog inputs of a device.
LAN
Power Control IR IN
HDMI Out ut
Coaxial
Analog Audio
Page 5
SNP-2 STREA ING NETWORK PLAYER
Installation
Total Control Interface View Only (Streaming Audio Device)
The SNP-2 can be used as a streaming audio device in up to 32
zones by broadcasting its proprietary audio signal over the local
area network to the Total Control system. The signal is then received
by a DMS-100, DMS-1200 or a DMS-AV, all while the user controls
the music selection from one of the Total Control interfaces like the
TRC-1080.
1. Plug the power cord into the rear of the SNP-2 and the other
end into a power outlet.
2. Plug the Ethernet RJ45 cable to the LAN port in the rear of
the SNP-2 and plug the other end into an available port of a
MFS-8 or router.
3. Control the SNP-2 directly from a Total Control interface such
as a TRC-1080. (Requires the Custom rofessional to
download the program to the Total Control system.)
TRC-1080
Page 6
SNP-2 STREA ING NETWORK PLAYER
Hybrid Total Control System
While the SNP-2 is streaming over the network, its interface can be
viewed and controlled via an HDM display such as a television or
an audio/video receiver.
1. Plug the power cord into the rear of the SNP-2 and the other
end into a power outlet.
2. Plug the Ethernet RJ45 cable to the LAN port in the rear of
the SNP-2 and plug the other end into an available port of a
MFS-8 or router.
3. Connect an HDM cable to the rear of the SNP-2 and an
HDM TV.
4. Control the SNP-2 from a Total Control interface or from the
television. (Requires the Custom rofessional to download
the program to the Total Control system.)
TRC-1080
Page 7
SNP-2 STREA ING NETWORK PLAYER
Standalone Operation
The SNP-2 also functions without a Total Control system, by simply
adding a URC Complete Control RF base station and RF remote
control.
1. Plug the power cord into the rear of the SNP-2 and the other
end into a power outlet.
2. Plug the Ethernet RJ45 cable to the LAN port in the rear of
the SNP-2 and plug the other end into an available port of a
MFS-8 or router.
3. Connect an HDM cable to the rear of the SNP-2 and an
HDM TV.
4. Connect a URC RF base station to the R input of the SNP-2.
5. Program a compatible one-way URC remote to communicate
with the RF base station. (Requires the URC Certified Custom
rofessional to program the URC remote and base station.)
MX-780
Indice
Altri manuali URC Lettore multimediale
