Usamobility ST902 Manuale utente
Table of Contents
i
Control Buttons 1
Getting Started 2
Turning Device On 3
Replacing Battery 3
Turning Device Off 3
Backlight 4
Using the Main Menu 4
Setting the Time and Date 5
Sending a Message 6
Reading a Message 8
Setting an Alert 9
Replying to Messages 11
Deleting All Read Messages 13
Deleting All Messages 13
Deleting Sent Messages 13
Setting New/Info InBox 14
Contacts 15
Setting the Alarm 17
Quiet Mode 17
Turning the Transmitter Off 18
Setting Quick Text 18
Setting Private Time 19
Setting Owner Info 19
Creating a Signature 20
Setting the Contrast 20
Setting the Screen Saver 21
About 21
Care and Maintenance 22
Safety Information 23
ii
1
Control Buttons
Getting Started
2
Turning Device On
•Ensure that a AA alkaline battery is properly installed.
•Open the lid and press the ENTER key to power on the device. Upon powering on, the ST902 will
take several seconds to initialize before displaying the Home Screen.
•From the Home Screen, press any key (except ESC key) to display the Main Menu.
•If a menu item is not selected, the device reverts to Standby mode after a predefined amount
of time (configurable in the Display/Keyboard/Screen Saver section of Preferences)
•If the device contains one or more unread messages, a circle indicator icon on the left side of
the screen will flash (while in Standby mode).
Turning Device Off
•From the Main Menu, press the Navigation button to scroll down to Power Off and press ENTER.
•Highlight Yes and press Enter.
3
Replacing Battery
•Remove the old battery
•Wait 10 seconds for the device to clear its “Low Battery”condition
•Insert a new alkaline AA battery
If your device does not register with “Full Service”or you experience issues with sending messages or
replies it may be necessary to insert a new AA battery in the device and wait up to 4 hours for the
internal battery to fully charge.
Using the Main Menu
Use the Main Menu for the following features:
•Read the received or sent messages
•Send messages
•Access contact information
•Change preferences
•Set the alarm
•Access quiet mode
•Turn the transmitter off and on
•Turn the device off
Press navigation keys to highlight the desired feature and then press Enter.
Backlight
In low-light conditions, press and hold ESC to turn on the backlight.
The backlight remains illuminated until the ST902 times out and returns to the Standby screen.
To manually turn the backlight off, press and hold ESC again.
4
Setting the Time and Date
•From the Main menu, press the navigation keys to highlight Preferences and press Enter.
•Press navigation keys to highlight Setup and press Enter.
•Press navigation keys to highlight Set Time & Date and press Enter.
•Use Left/Right keys to select the desired Network Sync type. They are:
•Yes : The minutes value of the time is automatically set.
•No : Allows complete manual setting of the time and date.
•Use Up/Down keys to move the cursor up and down.
•Use Left/Right keys to select the desired date format while the cursor is on the Format.
•Use Left/Right keys to move the cursor field to field while the cursor is on the Time and Date
setting.
•Use Enter key to increase the time and date while the cursor is on the Time and Date setting.
5
Sending a Message
This section discusses how to compose a message, select addresses and send a message with the
device.
Composing a Message
From the Main Menu, press the navigation keys, highlight Write and then press Enter.
Enter a message. After composing the message, press the Menu key (located at the upper left corner of
the keyboard).
Menu Options
The device will display six menu items. Menu items include: Select Address, Send, Add-replies, Quick-
Text, Back and Cancel. Use the navigation key to highlight the desired item and then press Enter to
execute.
•Select Address: The user can select addresses to send the message to.
•Send: The device sends the message. The Send icon will only be highlighted after an address
has been selected.
•Quick-Text: The user can insert pre-defined text into the message being composed.
•Back: Exits the Write menu.
•Cancel: Removes the menu items from the bottom of the screen.
6
Indice
Altri manuali Usamobility Cercapersone
