Ustellar UT11221 Manuale utente
Smart LED Downlight Manual
Smart LED Downlight Manual
1
Thank you for ordering from Ustellar. Set-up is easy and takes only
a few
minutes by following the instructions.
The smart downlight can work with both Amazon Alexa and Google
Assistant.
But the light after being installed will need to be paired
with an app called
‘Smart Life’ first, and then the Smart Life app will
need to be bound with either
Amazon Alexa or Google Assistant to
activate the voice control function.
How to install the downlight?
……………………………………………………...
1 - 8
Part One
…………………………...
9 - 16How to pair the downlight to Smart Life app?
Part Two
………………
20 - 22How to control the downlight with Amazon Alexa?
Part Four
…………
23 - 24How to control the downlight with Google Assistant?
Part Five
…………….…
17 - 19How to pair the remote control to Smart Life app?
Part Three
English
2
Quantity
Package Includes
Model Number
Wattage
Size
Color
Color Temperature
Max Luminous Flux
Input Voltage
Protection Rating
CRI
Frequency
Life Expectancy
Ta
UT11221-
RGBCW-US-4H
4-Pack
Downlight x 4,
Hub x 1,
Remote control x 1
Downlight x 1
1-Pack
UT11221-
RGBCW-US-1
P/N
1. Specification
1100LM
15W
UT11221
2700-6500k
AC120V
IP20
>80
50/60Hz
50000H
-25°C~40°C
6 Inches
800LM
10W
UT11222
2700-6500k
AC120V
IP20
>80
50/60Hz
50000H
-25°C~40°C
4 Inches
UT11222-
RGBCW-US-4H
4-Pack
Downlight x 4,
Hub x 1,
Remote control x 1
Downlight x 1
1-Pack
UT11222-
RGBCW-US-1
RGB, Cool White,
Warm White
RGB, Cool White,
Warm White
English
3
English
2. Components
LED downlight panel
** Only the 4-pack package includes a hub and a remote control.
Hub
Junction box
Bluetooth remote control
ON
OFF
4 Setp CCT
4 Setp
Dimming
ABCD
4 Scenes
RGB
Saturation +-
RGB
Dimming ±
6 Colors
RGB Switch
4
English
Note:
1. The Bluetooth Remote Control need to be configured in APP,
please read Part Three.
2. The remote control requires two AAA batteries, which are not
included in the package.
3. The button ABCD correspond to 4 scenes, which can be
configured in the APP Scene page.
A: Night B: Read C: Working D: Leisure
3.Bluetooth Remote Control
Reset
5
English
4. Downlight Panel Dimension
172mm/6.8inch
172mm/6.8inch
254mm/1inch
121mm/4.8inch
121mm/4.8inch
203mm/0.8inch
6 inch downlight
4 inch downlight
Preparation
English
To avoid damaging the lights, please assemble them on a soft, non-
abrasive surface, such as carpet or cardboard. Inspect each part for
defects such as the wire insulation for any cuts, abrasions, or exposed
copper that may have occurred during shipping. If there is a defect
in the wire, do not continue the assembly process.
Required Tools
Philips Screwdriver Safety Goggle Gloves Ladder
5. Installation
How to install the lights?
1.Turn off the circuit breaker.
2.Use a pencil to draw the outline according to the template,
and cut a hole according to the outline.
HOLE CUT-OUT
TEMPLATE
6
Bare copper wire
to Ground
White wire to N
Black wire to L
7
4.Connect the supply wires to the junction box wires:
5.Connect the junction box to the lamp panel, make sure the electrical
connection is good, and then tighten the connector.
English
3.Open the junction box and remove the appropriate knockout(s)
on the side plate. Run electrical wire from the power source (switch)
through the mounting hole.
Insert first, then rotate to make sure the connector buckle is tight
8
This smart downlight is designed for dimming via Smart Life App or
voice control devices such as Alexa or Google Assistant. Physical
dimmer switches are not compatible with this smart downlight. Please
push the physical switch, if any, to the top (at its maximum brightness),
otherwise the downlight may not work properly.
6. Dimming
English
6.Insert the junction box through the hole in the ceiling.
7.Push up the spring clips to insert the lamp panel in the opening
in the ceiling.
8.Turn on the circuit breaker and test the downlight.
9
Part Two - How to pair the
downlight to Smart Life app?
Step A : Smart Life app installation.
Please choose either way below to download and install the app.
Before starting the paring, please make sure to turn on the Bluetooth
and WiFi
on your phone.
1. As per your phone system, choose the QR code to scan.
iOS Android
2. Search keyword ‘Smart Life’ in Apple Store or Google Play.
Step B : Create an account on Smart Life and login.
Note: Please keep your account and password in mind for Alexa or
Google Assistant App pairing later.
English
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Ustellar Attrezzatura di illuminazione
