UTAH SCIENTIFIC 100-3 Guida all'installazione

UTAH 100 -3

System Setup and Operation

ii UTAH-100/3

UTAH 100-3 Operations Guide

•Document Number: 82101-0086

•Document Version: 2.0

•Date: July 2, 2014

•Printed in U.S.A.

Copyrights and Trademarks

out the prior written consent of Utah Scientific, Inc. is strictly prohibited.

•UTAH 100 is a trademarks of Utah Scientific, Inc.

•Windows, Windows 2000 and Windows NT and XP are registered trademarks of Microsoft Corpo-

ration.

•All other product names and any registered or unregistered trademarks mentioned in this guide are

used for identification purposes only and remain the exclusive property of their respective owners.

Notice

Information contained in this guide is subject to change without notice or obligation. While every effort

has been made to ensure that the information is accurate as of the publication date, Utah Scientific, Inc.

assumes no liability for errors or omissions. In addition, Utah Scientific, Inc. assumes no responsibility

for damages resulting from the use of this guide.

FCC Compliance (USA) and Digital Equipment Compliance (Canada)

This equipment has been tested and found to comply with the limits for a Class A, digital device,

pursuant to Part 15, Subpart B of the FCC Rules and the Canadian EMC Requirement (ICES-003).

These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case, the user will be required to correct the interference at

their own expense. Shielded cables must be used to ensure compliance with the FCC Class A limits.

Setup and Operations Guide

Declaration of Conformity

Utah Scientific, Inc.

4750 Wiley Post Way, Suite 150

Salt Lake City, Utah 84116-2878 U.S.A.

We declare our sole responsibility that the Utah-100 Digital Routing Switcher is in conformance with

the following standards:

Emission

•EN55022:1994+A1&A2

Immunity

•EN55024:1998

•EN61000-3-2

•EN61000-3-3

Safety

•IEC 60950-1:2001 /EN 60950-1:2001

Following the provisions of the Directive(s) of the Council of the European Union:

•EMC Directive 89/336/EED

•Low Voltage Electrical Directive 72/23/EEC

Utah Scientific, Inc. hereby declares that the product specified above conforms to the above Directive(s)

and Standard(s).

iv UTAH-100/3

Important Safeguards and Notices

This section provides important safety guidelines for the Operator and Service Personnel. Specific

warnings and cautions are found throughout the guide where they apply, but may not appear here. Please

read and follow the important safety information, specifically those instructions related to risk of fire,

electric shock, or injury to persons.

Safety Symbols

•Hazardous Voltage symbol

•Caution symbol. The product is marked with this symbol when it is necessary to

refer to the manual to prevent damage to the product.

Warnings

Please observe the following important warnings:

•Any instructions in this guide that require opening the chassis, changing a

power supply, or removing a board, should be performed by qualified personnel

only. To reduce the risk of electric shock, do not perform any service unless you

are qualified to do so.

•Heed all warnings on the unit and in the operating instructions.

•Do not use this product in or near water. Disconnect AC power before installing

any options or servicing the unit unless instructed to do so by this manual.

•This product is grounded through the power cord ground conductor. To avoid

electric shock, plug the power cord into a properly wired receptacle before con-

necting the product inputs or outputs.

•Route power cords and other cables so they won’t be damaged.

•The AC receptacle (socket) should be located near the equipment and be easily

accessible.

•Disconnect power before cleaning. Do not use any liquid or aerosol cleaner -

use only a damp cloth.

Setup and Operations Guide v

•Dangerous voltages exist at several points in this product. To avoid personal

injury, do not touch exposed conductors and components while power is on. Do

not insert anything into either of the systems two-power supply cavities with

power connected.

•Do not wear hand jewelry or watches when troubleshooting high current cir-

cuits, such as power supplies. During installation, do not use the door handles

or front panels to lift the equipment as they may open abruptly and injure you.

•To avoid fire hazard when replacing fuses, use only the specified correct type,

voltage and current rating as referenced in the appropriate parts list for this

product. Always refer fuse replacement to qualified service personnel.

•Have qualified personnel perform safety checks after any service.

Cautions

Please observe the following important cautions:

•When installing this equipment do not install power cords to building surfaces.

To prevent damage when replacing fuses, locate and correct the problem that

caused the fuse to blow, before reconnecting power.

•Use only specified replacement parts

Notices

Please observe the following important notes:

•When the adjacent symbol is indicated on the chassis, please refer to the man-

ual for additional information.

•For the HD-2020 Chassis and Master Control Panel, refer to “Connecting and

Disconnecting Power” - Chapter 2 (Hardware Installation).

vi UTAH-100/3

Company Information

Utah Scientific, Incorporated

4750 Wiley Post Way, Suite 150

Salt Lake City, Utah 84116-2878 U.S.A.

•Telephone: +1 (801) 575-8801

•FAX: +1 (801) 537-3098

•Technical Services (voice): +1 (800) 447-7204

•Technical Services (FAX): +1 (801) 537-3069

•E-Mail -General Information: info@utsci.com

•E-Mail -Technical Services: service@utsci.com

•World Wide Web: http://www.utahscientific.com

•After Hours Emergency: +1 (800) 447-7204. Follow the menu instructions for Emergency Service.

Setup and Operations Guide

Warranty Policies

Hardware Warranty

Utah Scientific, Inc. warrants to the original purchaser that the Utah Scientific hardware is free

from defects in materials and workmanship and will perform substantially in accordance with

the accompanying written materials under normal use and service for a period of ten (10) years

from the date of shipment. Any implied warranties on hardware are limited to ten (10) years.

Some states/jurisdictions do not allow limitations on duration of an implied warranty, so the

above limitation may not apply to certain specific purchasers.

Software Warranty

Utah Scientific warrants that the software will perform substantially in accordance with the

accompanying written materials for a period of one (1) year from the date of shipment.

Customer Remedies

For the first one (1) year after purchase of the software and the first ten (10) years after the date

of purchase of the hardware, Utah Scientific’s and its suppliers’ entire liability and purchaser’s

exclusive remedy shall be, at Utah Scientific’s option, either:

• Return of the price paid, or

• Repair or replacement of the software or hardware that does not meet the above warranties

and is returned to Utah Scientific under the returned materials authorization (RMA)

process with freight and forwarding charges paid.

After the initial warranty periods, purchaser’s exclusive remedy is the repair or replacement of

the hardware upon payment of a fixed fee to cover handling and service costs based on Utah

Scientific’s then-current price schedule. The above warranties are void if failure of the

software or hardware has resulted from an accident, abuse, or misapplication. Any replacement

software or hardware will be warranted for the remainder of the original warranty period or

thirty (30) days, whichever is longer.

viii UTAH-100/3

No other warranties. To the maximum extent permitted by applicable law, Utah Scientific and

its suppliers disclaim all other warranties, either express or implied, including, but not limited

to implied warranties of merchantability and fitness for a particular purpose, with regard to the

software, the accompanying written materials, and any accompanying hardware. This limited

warranty gives the purchaser specific legal rights. These rights may vary in certain states/

jurisdictions.

No liability for consequential damages. To the maximum extent permitted by applicable law,

in no event shall Utah Scientific or its suppliers be liable for any damages whatsoever

(including without limitation, damages for loss of business profits, business interruption, loss

of business information, or any other pecuniary loss) arising out of the use of or inability to use

Utah Scientific products, even if Utah Scientific has been advised of the possibility of such

damages. Because some states/jurisdictions do not allow the exclusion or limitation of liability

for consequential or incidental damages, the above limitation may not apply in those

circumstances.

UTAH 100/3 Operations Guide i

Table of Contents

Section 1

Section 1 1-1

Introduction 1-1

Installation 1-2

Initial Inspections 1-2

Before Applying Power 1-2

Service 1-2

Product Overview 1-3

Installation 1-3

Power 1-5

Power Supplies 1-5

AC Power Connections 1-6

Chassis Layout with Dimensions 1-7

Section 2

Individual Board (DAs) - Distribution Amplifiers 2-1

Analog Audio 1x8 / Dual 1x4 (121271-1) 2-1

171021-11 2-2

171021-12 2-3

3G-HD-SD DA - 1x8 / Dual 1x4 (121276-1) 2-5

171021-08 2-6

171021-09 2-7

3G DA Triple Fan Out - Triple 1x2 (121277-1) 2-8

171021-10 2-9

Digital Video DA SD Only - Dual 1x4 (121267-4 2-10

171021-08 2-11

171021-09 2-12

Analog Video Clamp / Equalizer DA - 1x8 (121265-1), Dual 1x4

(121265-2) 2-13

171021-08 2-15

171021-09 2-16

Analog Video Utility DA - 1x8 (121266-1), Dual 1x4 (121266-2) 2-17

171021-14 2-19

ii UTAH 100 Series

171021-15 2-20

DA Power Supply (121260-1) 2-21

Rear Panel Operation 2-22

Indice

Altri manuali UTAH SCIENTIFIC Amplificatore

UTAH SCIENTIFIC

UTAH SCIENTIFIC UTAH-100 UDS-288 Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente