UTRAI JS-1 Pro Manuale utente
PJSTAR-V2.0
Jump Starter JS-1 Pro
USER MANUAL
01
11
21
31
41
51
61
..........................................
.........................
.....................................
.......................
............................................
...................................
..........................
Packing List
01EN
English
JS-1 Pro Smart Battery Clamp USB To USB-C Cable
Carrying Case User Manual
JumpStarter
JS-1Pro
USERMANUAL
Layout
02EN
6
7
8
2
4
9
5
10
1
3
13
14
11
12
Situation
Function
LED Flashlight
Compass
EC5 Output Port
LED Indicator
USB Output Port 1
Red Battery Clamp
Safety Hammer
USB-C Input Port
Battery Clamps Plug
USB Output Port 2
Black Battery Clamp
Display Screen
Power Button
01
05
07
11
09
13
06
08
12
10
14
02
03
04
Normal, Strobe, SOS, Warning.
Direction.
Insert the plug into the jump starting port.
Show the work status of the battery clamp.
Charge your devices.
Connect to positive terminal of the car battery.
Essential safety tool, car window breaker.
Charge the jump starter.
Insert the plug completely into the jump starter.
Charge your devices.
Connect to negative terminal of the car battery.
Show the battery percentage, input, output
and wireless charging status.
• Press the button to show the remaining capacity.
• Long press the button to turn on / o the
ashlight.
• When the ashlight turns on, press the button to
change the ashlight.
Charge your devices which support wireless
charging.
Wireless Charging
Pad
03EN
04EN
Specications
Important Safety Information
Model
Car Jump Start Output
Battery Capacity
USB-C Input
USB1 Output
USB2 Output
Wireless Charging
Unite Size (L * W * H)
JS-1 Pro
12V
59.2Wh
5V/2A, 9V/2A
5V/3A, 9V/2A, 12V/1.5A
5V/2.1A
10W
179mm * 90mm * 47mm
WARNING: Read all instructions and warnings prior to using this product.
Improper use of this product may result in product damage, excess heat,
toxic fumes, re or explosion, for which corporation is not responsible.
• Always read all instructions carefully before using your Jump Starter.
• Do not submerge your Jump Starter in water, or expose it to rain or moisture.
• Never open or disassemble your Jump Starter as it will void your warranty.
• Do not expose your Jump Starter to re, intense heat, or ammable liquids.
• Keep away from and out of reach of children.
• Do not insert foreign objects into ANY inputs or outputs.
• Do not allow the metal teeth of the red clamp to touch the metal teeth of the
black clamp when connected to your Jump Starter.
• Do not connect the black clamp to the vehicle battery’s positive(+) terminal
when connected to your Jump Starter. Do not connect the red clamp to the
vehicle battery’s negative(-) terminal when connected to your Jump Starter.
• Do not open your Jump Starter to replace the internal battery. No user-
replaceable parts are inside your jump starter.
• Always disconnect the jump start cables from your Jump Starter after use and
store separately.
• For protecting this unit, make sure the battery capacity of jump starter is
above 75% before jumping start your car.
• Check the power of the product at least every three months, and charge the
product in time.
05EN
Operation Guide
Charging your jump starter
• At Home :
1. Plug the USB cable into USB charging output or any USB 2A wall adaptor (not
included).
2. Connect the USB-C port into the Jump Starter.
• In Car :
1. Plug the car adaptor (not included) into the socket.
2. Connect the USB-C port into the Jump Starter.
How the LCD display shows:
1. When charging the jump starter, the “IN” and “ ” show up at the same
time, it indicates ordinarily charge the jump starter, and the units digit of the
power percentage ashes.
2. When the “IN” and “ ” show up at the same time, it indicates quickly
charge the jump starter.
3. It will stop ashing after full charged, and the LCD display will automatically
turn o after 10 seconds.
4. If the charger is unplugged while charging, the LCD display will go out
immediately.
06EN
Charge your devices
JS-1 Pro comes with 2 USB output ports.
• Plug the USB cable into the USB output ports on your jump starter.
• Connect the cable to your phones, tablets or other devices you want to
charge.
• Press the power button to start charging. When the “OUT” and “ ” show up
at the same time, it indicates that jump starter ordinarily charge your device.
• When the “OUT” and “ ” show up at the same time, it indicates that jump
starter quickly charge your device.
Wireless charging
1. Press the power button to activate the jump starter.
2. Place the mobile device face up on the wireless charging pad. Move the
mobile device slowly until the power percentage, “ ”and “ ” always-on
displays on the LCD display.
NOTE: It is recommended to recharge the JS-1 Pro every 3 months to maintain
the battery eciency and prolong the battery life even if the unit has not been
used.
07EN
Flashlight
1. Please press & hold Power Button for 3 seconds to turn on / o the ashlight.
2. In ashlight mode, press Power Button to select from 5 modes (normal,
strobe, SOS, warning, o).
Safety hammer
This is an essential safety tool that helps you out from the vehicles.
Please choose the left or right window and hit the corner of the glass. The front
and the backward windshields will crack on the surface but will not be broken
when hit by the hammer.
Jump starting a vehicle
By owning a Jump Starter, you have everything you need to jump start a
vehicle—no need to wait for help, JS-1 Pro to the rescue!
We know you’re excited, but before jumping your vehicle, please be sure to
take some precautionary steps:
• Read your vehicle owner’s manual rst as the manufacturer may have
specic steps and precautions that pertain to your vehicle.
• Be sure to turn o all electronics in your car (radio, lights, etc.) before jump
starting.
• Make sure you are in a dry, well-ventilated area. Never jump start a vehicle in
an enclosed area.
• Remove any moisture from your JS-1 Pro unit, accessories, and your
vehicle’s battery. Never attempt to jump start a vehicle when moisture is
present.
• Check that the vehicle’s battery terminals are clean to ensure the best
conductivity.
• Properly identify the vehicle battery’s positive (+, red) and negative (-, black)
terminals before connecting the clamps.
Choose the left or right window
Hit the corner 1,2,3,4 of the glass
3
2
4
1
08EN
NOTE：When adjusting the clamps please be sure to disconnect your Jump
Starter rst. This will prevent the occurrence of minor sparks.
How to jump start your car
Step 1: Insert the plug of the battery clamps completely into the jump starter,
the red and green lights ashing alternately.
Step 2: Connect the red clamp to the positive electrode (+) of the car battery
and the black clamp to negative one (-). The green light is always on.
• When using the clamps, do not allow the metal teeth of the black clamp to
touch the metal teeth of the red clamp.
• When using the clamps, DO NOT connect the RED clamp to the vehicle
battery’s negative (-) terminal, or the BLACK clamp to the vehicle battery’s
positive (+) terminal.
• When connecting smart clamps to the battery terminals, ensure the copper
teeth on each side of the clamp make good contact with the terminal. The
better the connection, the easier it will be to start your vehicle.
RED BLACK
Indice
Lingue:
Altri manuali UTRAI Avviamento remoto
