SCUBAPRO AIR2 3rd & 4th Generations
2003 SCUBAPRO
Important note: The following information is not designed to be a complete training guide for servicing the listed SCUBAPRO regulators. All SCUBAPRO
technicians are required to attend an annual service training program to insure safe handling and servicing of SCUBAPRO products. All SCUBAPRO technicians
must be employed by an authorized SCUBAPRO facility.
10
P/N43040000
TOOLS
NEEDED
No tools needed
this step
Replace the “c” clip. If needed, use a
small screwdriver or flat pick to insure
that the “c” clip is tightly in place.
Inspect the diaphragm to insure there
are no punctures or wear.
Reassemble the diaphragm, friction
washer and front cover. Tighten using
the Seat Slider tool.
Adjustments are made by inserting the
Air 2 spider tool into the quick
disconnect side of the air barrel.
Turning clockwise reduces the distance
between the orifice and the poppet seat
and increases the cracking effort.
Turning counter-clockwise increases
the distance and reduces the cracking
effort.
