V-TAC VT-5122 Manuale utente
WEEE Number: 80133970
INSTALLATION INSTRUCTION
WIFI PTZ CAMERA [VT-5122]
Multi-Language
Manual - QR CODE
Please scan the QR code
to access the manual in
multiple languages.
INTRODUCTION
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best.
Please read these instructions carefully before starting the installation and keep this
manual handy for future reference. If you have any another query, please contact
our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best.
This marking indicates that
this product should not be
disposed of with other
household wastes.
ENGLISH
SCREW NUTS
(2PCS) FITTING
(1PC) FITTING NUT
(1PC) SCREWS
(2PCS) ADAPTER
(1PC)
STEEL PIN
(1PC)
INSTALLATION DIAGRAM
PACKAGING CONTENTS
CAMERA
(1PC)
ENGLISH
MAIN FUNCTION
TECHNICAL DATA
DOWNLOAD THE APP
• Google Play Store - Search “YCC365 Plus”
• IOS (Apple Store) - Search “YCC365 Plus”
• Android phones and IOS(Iphone) can
download by scanning the following QR codes.
• 10 meters Night Vision
• 25–30fps Frame Rate
• Two way Audio
• WEP/WPA-PSK/WPA2-PSK encryption
Wireless Security
• SD up to 128gb Storage
• Indoor Use only – IP20
• Supports Android & IOS devices
• IEEE802.11b/g/n Wireless Frequency
• DC:5V±5% Input Power
• Auto tracking
• Motion Detection
• 2.4~2.4835 Ghz Wireless Frequency
• 355°/85° Pan/Tilt
• 1920x1080P Resolution
• 2.0M pixel HD cmos Image Sensor
• 3.6mm Lens
• H.264/Mjpeg Video Compression
ENGLISH
FIGURE 1 FIGURE 2 FIGURE 3
FIGURE 4 FIGURE 6FIGURE 5
REGISTER NEW ACCOUNT
LOGIN USING EMAIL
1. Tap on “Sign Up” to register with your email address as user ID and tap on
“Next” to create a password.
2. Tap on “Next” - The APP will send a confirmation link to your email ID. Please
confirm the link to complete the registarion process.
LOGIN USING PHONE NO.
1. Tap on “Login in with mobile phone number” (fig 1) to change the login panel
2. Tap on “Sign Up” to register with your phone number as user ID and tap on
“Next” - The APP will send a SMS verification code to your mobile phone. Please
input the SMS verification code in the APP to complete the registarion process.
3. Tap on “Next” to create a password.
ENGLISH
FIGURE 7 FIGURE 8 FIGURE 9
ADDING CAMERA DEVICE TO THE APP
TIP: First, connect the power adapter to the camera, then the camera will sound
"Please configure camera by AP hotspot or by scanning code" then using the YCC365
Plus APP start adding the camera to the APP. If you do not hear the sound, press and
hold the "RESET" button on the device until you hear the sound "Reset Success". Please
wait until you hear the sound "Please configure camera by AP hotspot or by scanning
code"
NOTE: The camera only supports 2.4G Wi-Fi, before adding devices, make sure your
router is 2.4G Wi-Fi, and your phone is connected to 2.4G Wi-Fi.
Add Camera
• Add camera Tap on top right corner “+” sign as shown below (figure 7)
• Tap on “Smart Camera” as shown below(Figure 8)
• There are three ways for adding the camera: (a) Device adding by scanning code (b)
Addition of AP hotspot (c) Addition by connecting to network cable(This feature is not
available for this camera) (Refer to Figure 9)
ENGLISH
FIGURE 10 FIGURE 11
A. DEVICE ADDING BY SCANNING THE CODE
• Tap on “device adding by scanning the code” (Ref Figure 9).
• Please refer to "TIP" before tapping on Next.
After you hear the sound from camera "Please configure camera by AP hotspot or by
scanning code" tap on Next (Figure 10)
• Enter your Wi-Fi Name and Password.
• Now if your mobile phone is already connected to network Wi-Fi, it will show your
network Wi-Fi name. If not, press “Switch the network” to open your phone’s WLAN
and connect to your available network. Then go back to the app. Input Wi-Fi pass-
word (note: this password must be your network Wi-Fi password), and then click
“Next”. A QR code will show on phone screen.
• Place the QR code towards the camera lens at a distance of around 4-8 inches.
After the camera reads the QR, it will sound with “two beeps” and Wi-Fi connecting.
Now on the App, tap on “Beep or flashing lights” (Figure 12). Then wait till the
camera confirms with “Internet connected” “welcome to use cloud camera”. On app it
will also show “Addition is successful”- Select/type the device name (Figure 15) and
tap on “Start to experience”.
FIGURE 12
ENGLISH
B. ADDITION OF AP HOTSPOT
• Tap on “addition of AP Hotspot” (Ref Figure 9).
• Please refer to "TIP" before tapping on "Go to setting".
After you hear the sound from camera "Please configure camera by AP hotspot or by
scanning code" tap on "Go to setting" (Figure 10)
• Tap on “Go to Setting" (Figure 16) button then Select the camera hotspot named with
“CLOUDCAM_XXXX” (Figure 17). After connecting the camera then go back to the app and
Tap on “Next” (Figure 18).
FIGURE 14 FIGURE 15
FIGURE 16 FIGURE 18
FIGURE 17
FIGURE 13
ENGLISH
• Connect the Ethernet cable between
camera and Wi-Fi router.
• Tap on “Addition by connecting to
network cable” (Ref Figure 9).
• Please scan the QR code on the
device and wait for the network
connection to succeed.
FIGURE 19
FIGURE 21
FIGURE 20 [A] FIGURE 20 [B]
C. ADDITION BY CONNECTING TO
NETWORK CABLE
(ONLY SUPPORT LAN PORT DEVICE)
• Select your network Wi-Fi and input Wi-Fi password (note: this password must be your
network Wi-Fi password). Then Tap “confirm” [Figure 19], the camera will sound with two
beeps and voice “Network is connecting, please wait”. Then wait till the camera confirms with
“Internet connected welcome to use cloud camera”. On app it will also show “Addition is
successful”- Select/type the device name (Figure 20 [B]) and tap on “Start to experience".
ENGLISH
FIGURE 22 [A] FIGURE 22 [B] FIGURE 22 [C] FIGURE 22 [D]
FIGURE 22 [F]FIGURE 22 [E] FIGURE 22 [G] FIGURE 22 [H]
D. AP DIRECT MODE (SPECIAL)
• Open the YCC365 plus APP to enter the login interface. Tap on "Local direct connection" as
shown in Figure 22[A]
• Tap on plus sign on the top right hand corner as shown in Figure 22[B].
• Power up the camera and wait until you hear the voice "Please configure camera by AP
hotspot or scanning code" and Tap on "Next" as shown in Figure 22[C] (if you don't hear the
voice, reset the camera）
• Tap on "Go to setting" as shown in Figure 22[D] and connect the camera hotspot named
with “CLOUDCAM_XXXX" as shown in Figure 22[E]. After connecting the camera go back to
the APP and tap on "Next" as shown in Figure 22[F]. If unsure please refer to Figure 22[D]
and tap on "How to connect the device".
• Enter the User name: admin | Password: 12345 and tap on “Next”, as shown in Figure
22[G].
• On app it will also show “Addition is successful”- Select/type the device name (Figure
22[H]) and tap on “Start to experience"
ENGLISH
8
FUNCTION INTRODUCTION
Real-time preview interface
A: Settings Menu
B: Video
C: Snapshot
D: Full Screen
E: Pan-tilt reset
F: Preset
G: Pan&Tilt
H: Message
I: Video quality
J: Hold to talk
K: Sound
L: More
View cloud albums.
Video to the phone
FIGURE 22
FIGURE 23
ENGLISH
Altri manuali per VT-5122
1
Indice
Lingue:
Altri manuali V-TAC Telecamera di sicurezza
