V-tech VSP600 Manuale utente

How to configure Vtech VSP600 Cordless Phone:

To begin configuring your Vtech for use on Intermedia’s Network, you will need to pull up the graphical

user interface.

Obtain the Credentials for the device in HostPilot:

1. Login to HostPilot.

2. Navigate to Services>Voice Services.

3. Choose Numbers&Extensions Tab.

4. Click on the phone number of the device.

5. Navigate to SIP configuration

To Pull the IP of the phone, there are two ways:

On the phone:

1. Press the Softkey button for Menu on the phone

2. Scroll down to ‘Status’ and hit the Center button [Select]

3. Press [Select] for ‘Network’ or press the [Enter] soft key

4. The IP of the phone should now be displayed

Via Netscan:

1. Run Netscan

2. Find the MAC of the phone in the scan and look at the associated IP

Once you find the IP address, input that into any Web Browser, you will be met with a login pop-up.

The default credentials are: admin/admin (after factory reset, username and password are user/user)

At this point we’re ready to configure this SIP phone.

1. Click on System across the horizontal Black bar

Click on ‘Account 1’ under SIP Account Management on the left-hand Pane.

Fill out the following information:

General Account Settings:

Toggle ‘Enable Account’ On

Display name: (Optional)

User identifier: [EXT]

Authentication name: [SIP User Name In HostPilot]

Authentication password: [SIP Password In HostPilot]

Leave the rest as default

SIP Server:

Server Address: [SIP Domain In Host Pilot]

Port: [In Host Pilot]

Registration:

Server Address: [Same as SIP server address]

Port: [Same as SIP server port]

Expiration (secs): 300

Registration Frez (secs): 300

Outbound Proxy:

Server Address: [Outbound Proxy In Host Pilot –Same as SIP server address]

Port: [Same as SIP server port]

Backup Outbound Proxy

Server Address: [Outbound Proxy In Host Pilot –Same as SIP server address]

Port: [Same as SIP server port]

Audio:

Codec Priority 1: [Preferred Codec In Host Pilot]

Codec Priority 2: [Secondary Codec In Host Pilot]

Mark ‘None’ for the rest of the Codec Priorities

Signaling Settings:

Local SIP port: 6xxx –(xxx = The ext #. Our example shows 6225 for Ext 225)

Transport: UDP

Voicemail Settings:

Mailbox ID: [EXT]

Expiration (secs): 300

NAT Traversal

Toggle ON ‘Enable UDP Keep-Alive’

Keep-alive interval (secs): 300

Hit ‘SAVE’ at the bottom

2. Under System, click on ‘Signaling’ on the left-hand panel

Voice:

Min Local RTP port: 30000

Max Local RTP port: 50000

NAT Traversal

Min Public RTP Port: 30000

Max Public RTP Port: 50000

Hit ‘Save’

3. Your phone may have an incorrect time even though the HostPilot may indicate the correct time

zone for this particular device.

To correct this:

Go to the ‘Servicing’Tab

Click on ‘Time and Date’ on the left-hand panel

Network Time Settings:

Ensure ‘Enable Network Time’ is toggled ON

NTP Server: us.pool.ntp.org

Time Zone and Daylight Savings Settings:

Adjust Time Zone: [Depends on location]

If applicable, toggle ON ‘Automatically adjust clock for Daylight Savings’

Manual Time Settings:

Date Format: (User Preference)

Time Format: (Adjust Accordingly)

Hit Save, then hit Apply

4. We can change the name under System and Handset Name.

For Handset 1, you can

This is the Phone Display name.

5. If you have multiple handsets, you would need to register the second account [Account 2] and

adjust them accordingly

Go to System > Account Assignments

Ensure Account 1 is only checked for Handset 1. The Default account should be ‘Account 1’

For Handset 2, we should have Account 2 only checked and the Default should be ‘Account

2’

Refer to picture below:

6. Lastly, we should reboot the phone.

Click on the ‘Servicing’ Tab across the horizontal black bar

Click on Reboot

Note: It may take a few minutes for phone to come back into operation after applying

settings.

The Line should now be registered under Status then System Status.

‘Account 1’ should show registered now.

Altri manuali per VSP600

Altri manuali V-tech Telefono senza fili

V-tech

V-tech VT 9115 Manuale utente

V-tech

V-tech i 5871 Manuale utente

V-tech

V-tech gz 2334 Manuale utente

V-tech

V-tech CS5113 Manuale utente

V-tech

V-tech t2416 Manuale utente

V-tech

V-tech VT 1421 Manuale utente

V-tech

V-tech ia5870 Manuale utente

V-tech

V-tech i 6773 Manuale utente

V-tech

V-tech CS6928-2 Manuale utente

V-tech

V-tech t2326 Manuale utente

V-tech

V-tech CS5111-2 Manuale utente

V-tech

V-tech VT 1901 Manuale utente

V-tech

V-tech IS8251 Manuale utente

V-tech

V-tech DS6673 Manuale utente

V-tech

V-tech CS6719 Manuale utente

V-tech

V-tech v 2651 Manuale utente

V-tech

V-tech Cordless Telephone Manuale utente

V-tech

V-tech 3111-2 Manuale utente

V-tech

V-tech LS6217 Manuale utente

V-tech

V-tech Vonage IP 8100-2 Manuale utente

V-tech

V-tech 6031 Manuale utente

V-tech

V-tech CS6124 Manuale utente

V-tech

V-tech CS6124 Manuale utente

V-tech

V-tech CS6858-3 Manuale utente

Manuali Telefono senza fili popolari di altre marche

3Com

3Com NBX Manuale utente

Panasonic

Panasonic KX-TGK210HK Manuale utente

Panasonic

Panasonic KX-TCA181EX Manuale utente

BT FREESTYLE 3200 Manuale utente

AT&T

AT&T CL84102 Manuale utente

BREZZICNI

BREZZICNI CL-3622 Manuale utente

Panasonic

Panasonic KX-TG1831NZ Manuale utente

Panasonic

Panasonic KX-TG7301E Manuale utente

Furuno

Furuno FM-4721 Manuale utente

Sanyo

Sanyo CLT-J70 Manuale utente

Amplicomms

Amplicomms BigTel 201 Manuale utente

GE 26992 Manuale utente

AT&T

AT&T E1812B Manuale utente

Sanyo

Sanyo CLT-670 Manuale utente

GE 15432970 Manuale utente

Curtis

Curtis TC595 Manuale utente

Gigaset

Gigaset Gigaset 3000 Micro Manuale utente

Poly

Poly VVX D230 Guida all'installazione