V-tech VNT814 Manuale utente
Go to
businessphones.vtech.com
to register your product for
enhanced warranty support and
the latest VTech product news.
User’s manual
VNT814
4-Port Ethernet Router
Congratulations
on your purchase of this VTech product. Before using this product, please read
the Important safety information.
This user’s manual provides you with the complete installation, setup and
operation instructions.
For customer service or product information, visit our website at
businessphones.vtech.com or call 1 (888) 370-2006.
Model number: VNT814
Type: 4-Port Ethernet Router
Serial number:
Purchase date:
Place of purchase:
Both the model and serial numbers of your VTech product can be found on the
bottom of the router.
Save your sales receipt and original packaging in case it is necessary to return
your router for warranty service.
i
Important safety information
When using your equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury, including the following:
Read and understand all instructions.
Do not use this product near water such as near a bath tub, wash bowl, kitchen
sink, laundry tub or a swimming pool, or in a wet basement or shower.
Do not place this product on an unstable table, shelf, stand or other unstable
surfaces.
CAUTION: Use only the adapters included with this product. Incorrect adapter
polarity or voltage can seriously damage the product.
Power adapter: Input 100-240V AC 200mA 50/60Hz; Output: 12V DC 500mA
The power adapters are intended to be correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
For pluggable equipment, the socket-outlet shall be installed near the equipment
and shall be easily accessible.
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
Do not cut off the power adapters to replace them with other plugs, as this causes a
hazardous situation.
Do not allow anything to rest on the power cords. Do not install this product where
the cords may be walked on or crimped.
This product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supply in your home,
consult your dealer or local power company.
Do not overload wall outlets or use an extension cord.
This product should not be placed in any area where proper ventilation is not
provided. Slots and openings in the back or bottom of this product are provided for
ventilation. To protect them from overheating, these openings must not be blocked
by placing the product on a soft surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator or heat register.
Never push objects of any kind into this product through the slots because they may
touch dangerous voltage points or create a short circuit. Never spill liquid of any
kind on the product.
To reduce the risk of electric shock, do not disassemble this product, but take it
to an authorized service facility. Opening or removing parts of the product other
than specified access doors may expose you to dangerous voltages or other risks.
Incorrect reassembling can cause electric shock when the product is subsequently
used.
Periodically examine all components for damage.
SAVE THESE INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Important safety information
Electromagnetic fields (EMF)
This VTech product complies with all standards regarding electromagnetic fields (EMF).
If handled properly and according to the instructions in this user’s manual, the product is
safe to be used based on scientific evidence available today.
ii
Parts checklist
Your router package contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.
iii
Router
Power adapter
Ethernet cable
Abridged user’s
manual
iv
Table of contents
Getting started
Router overview ........................................1
Plan and connect your system .................3
Configure your computer network ............5
For Windows XP/2000 ...........................5
For Windows Vista/7/8 ..........................8
Configure your router
Login to the web management page ......11
Fast configuration ...................................12
Status .....................................................13
Device info ...........................................13
Statistics ..............................................14
Setup ......................................................15
WAN ....................................................15
LAN .....................................................16
Advanced ................................................19
Route ...................................................19
NAT .....................................................21
QoS .....................................................28
Port mapping .......................................30
Others ..................................................31
Service ....................................................33
IGMP ...................................................33
UPnP ...................................................34
DNS .....................................................34
DDNS ..................................................35
FTP server ...........................................36
Firewall ...................................................37
MAC filter .............................................37
IP/Port filter ..........................................38
URL filter .............................................39
ACL .....................................................40
DoS .....................................................41
Maintenance ...........................................42
Update .................................................42
Password .............................................46
Reboot .................................................48
Time ....................................................49
Log ......................................................50
Diagnostics ..........................................50
Appendix
Frequently asked questions ....................53
FCC part 15 ............................................54
For cETL compliance only ......................55
Limited warranty .....................................57
Technical specifications ..........................59
Index.......................................................60
1
Getting started
Router overview
e f g
h
d
b ca
1 – (On/Off) light
On when the router is powered on.
2 – WAN light
On when the WAN port is connected.
Flashes when the router receives data from the WAN port.
3 – L1 L2 L3 L4 lights
On when the corresponding LAN port is connected.
Flashes when the corresponding LAN port receives data.
•
•
•
•
•
2
e f g
h
d
b ca
4 – Power jack
Connects to the power adapter.
5 – (On/Off) button
Press to power on the router.
Press once again to power it off.
6 – LAN ports
Connect to Ethernet devices such as computers and SIP phones.
7 – WAN port
Connects to the wide area network.
8 – RESET button
Press and hold for five seconds to reset the router to default settings.
•
•
•
•
•
•
Getting started
Router overview
3
Getting started
Plan and connect your system
The VNT814 router has four LAN ports to connect with Ethernet devices such
as computers and SIP phones. Before you start setting up your system, plan it
carefully. Consider the following before you start planning your system.
Number of Ethernet device(s) you need to connect with.
Number of router(s) you need.
NOTES
Use only the adapter provided.
Make sure the electrical outlet is not controlled by a wall switch.
The adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are
not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
To power on, press button at the back of the router. The light will light up.
•
•
•
Connects to
Computer
Connects to
SIP Phone
Power
on/off
button
Connects
to power
Connects to the
internet via
Cable/DSL Modem
4
To connect more than four Ethernet devices, you can purchase additional
VNT814 router(s), and then connect them to the parent router. See the graphic
below for more details.
NOTES
Make sure you have connected all routers and devices before you power on any router or device.
Follow this sequence to power on the system: (1) Parent router, (2) Child routers, (3) other
Ethernet devices.
Child routers enter Auto Bridge Mode. All Ethernet devices obtain IP addresses from the parent
router directly.
•
•
•
Getting started
Plan and connect your system
Parent router
Child routers
(in Auto Bridge
Mode)
VNT814 Router
VNT814 Router VNT814 Router VNT814 Router VNT814 Router
SIP PhoneSIP PhoneComputer
Cable/DSL Modem
Altri manuali per VNT814
1
Indice
Altri manuali V-tech Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza