Vacon 10 Istruzioni per l'installazione
1•vacon vacon-adp-mcaa adapter
Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
vacon adp-mcaa communication adapter for vacon
10, user’s instructions
1. INTRODUCTION
VACON-ADP-MCAA communication adapter has two functionalities:
1) It is needed as an adapter between Vacon 10 and the PC cable when Vacon 10 is
connected to a computer.
2) The adapter functions also as a parameter memory device that can store param-
eter settings from the drive. The parameter settings can be copied to another drive
with the help of this adapter.
NOTE! The parameters can only be
copied to another Vacon 10 drive of
same power and voltage!
VACON-ADP-MCAA communication adapter delivery includes only the adapter.
VACON-ADP-MCAA KIT delivery includes the adapter and the PC connection cable.
vacon-adp-mcaa adapter vacon •2
2. DESCRIPTION OF DIFFERENT PARTS AND THEIR FUNCTIONS
Communication adapter external parts I:
Figure 1.1: Communication adapter external parts I
1) Communication indicator (green): the indicator blinks when information is
being transferred between the MCA adapter and the drive.
2) Error indicator (red); blinks when when there is an error in communication
between MCA adapter and the drive.
3) Upload button: Pressing this button uploads the parameter settings from
the drive to the adapter.
4) Download button: Pressing this button downloads the parameter settings
from the adapter to the drive.
5) Battery cover: Cover for a 9V battery (for future use).
1
2
3
4
5
3•vacon vacon-adp-mcaa adapter
Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
Communication adapter external parts II:
Figure 1.2: Communication adapter external parts II
6) RJ-45 connector: Connector for the PC-cable.
7) Connector for the Vacon 10
8) Fitting clamps for attaching the adapter to the drive
9) Connector for external power supply (for future use)
67
88
9
vacon-adp-mcaa adapter vacon •4
3. USING THE VACON-ADP-MCAA ADAPTER
3.1 Functionality of the led indicators
Figure 1.3: Functionality of the LED indicators
COMM
ERROR
COMM
ERROR
COMM
ERROR
Communication LED on (green):
Ready state, e.g. data
transfer completed
Error LED on (red):
Fault state, communication
error between the MCA and the drive.
COMM LED blinks:
MCA and the drive are communicating
(for example parameter up-/downloading)
5•vacon vacon-adp-mcaa adapter
Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
3.2 Connecting Vacon 10 to a PC with the MCAA adapter
1Make sure that Vacon 10 is powered off.
2
Remove the rubber plug covering the connector port of the drive, see
below:
3
Connect the MCAA adapter to the drive, see below:
4Connect the PC cable to the adapter and to your PC.
vacon-adp-mcaa adapter vacon •6
3.3 Disconnecting Vacon 10 from the PC
3.4 Copying parameter settings from a drive to another
NOTE! The parameters can only be copied
to another Vacon 10 drive of same power
and voltage!
5Power on Vacon 10. You can now adjust parameter settings, control the
operation of the drive, monitor the drive with VaconLive PC-software or
update the software of the drive by using VaconLoader PC-software
1Make sure that Vacon 10 is powered off.
2Remove the PC cable and disconnect the adapter from the drive by
pressing the fitting clamps on the sides of the adapter. (See Figure 1.2)
3Insert the rubber plug back on the connector port of the drive
1Make sure that Vacon 10 is powered off and connect the MCAA adapter to
the drive. See steps 1-3 in Chapter 3.2.
2Power on the drive and press the upload button on the adapter to upload
the parameter values from the drive to the adapter. Wait until the COMM
LED stops blinking.
3Power off the drive and remove the MCAA adapter. See step 2 in ch. 3.3
4Connect the adapter to the other drive according to the procedure
described above.
5Power on the drive and press the download button on the adapter to
download the parameter values from the adapter to the drive. Wait until
the COMM LED stops blinking.
6Power off the drive and remove the MCAA adapter. The parameter set-
tings from the first drive have now been copied onto this drive.
Altri manuali per 10
8
Indice
Altri manuali Vacon Controllori
Vacon
Vacon nxs Manuale utente
Vacon
Vacon NX_ 0003 5 Manuale utente
Vacon
Vacon 20 Manuale utente
Vacon
Vacon NX Manuale utente
Vacon
Vacon NXP Manuale utente
Vacon
Vacon 100 INDUSTRIAL Manuale utente
Vacon
Vacon NXP series Manuale utente
Vacon
Vacon NX ACTIVE FRONT END II Istruzioni per l’uso
Vacon
Vacon 100 INDUSTRIAL Manuale utente
Vacon
Vacon 20 CP/X Istruzioni per l’uso
Vacon
Vacon 100 INDUSTRIAL Manuale utente
Vacon
Vacon 10 Manuale utente
Vacon
Vacon 20 CP Manuale utente
Vacon
Vacon NX Manuale utente
Vacon
Vacon 20 x Manuale utente
Vacon
Vacon 20 SERIES Istruzioni per l’uso
Vacon
Vacon 100 INDUSTRIAL Manuale utente
Vacon
Vacon 10 Manuale utente
Vacon
Vacon optea Manuale utente
Vacon
Vacon 100 INDUSTRIAL Manuale utente
