VADDIO EasyIP Systems Manuale utente

Complete Manual for

EasyIP Systems

Featuring the EasyIP Decoder, EasyIP Mixer, and EasyIP 10 Camera

Document 411-0041-35 Rev C

June 2020

Contents

Overview 1

What's in this Guide 1

The EasyIP Ecosystem 2

EasyIP Cameras 2

EasyIP Decoder 2

EasyIP Mixer 2

PoE+ Switch 2

Camera Features 2

Decoder Features 3

Mixer Features 3

Unpacking the EasyIP System Components 4

EasyIP 10 AV-over-IP PTZ Camera 4

EasyIP Decoder AV-over-IP Switching USB Endpoint 4

EasyIP Mixer AV Switcher 5

A Quick Look at the EasyIP Family 6

EasyIP 10 Camera 6

EasyIP Decoder 7

EasyIP Mixer 8

Installation 9

Don’t Void Your Warranty! 9

Before You Start 9

Before Installing a Camera 10

Cabling Notes 10

Basic Connections – EasyIP Decoder and EasyIP 10 Cameras 11

Basic Connections – EasyIP Mixer 12

Using Dante Devices with the EasyIP Mixer 13

Installing the Wall Mount 13

About Ceiling-Mounted Cameras 13

Installing the Camera 14

Powering Up the EasyIP System 15

Initial Set-Up and Access to Administrative Controls 16

Browser Support 16

Initial Device Set-up Process Overview 17

About the Vaddio Device Controller 17

About the Vaddio Deployment Tool 17

Access and Initial Device Set-Up Using the Vaddio Device Controller 18

Initial Device Set-Up and Access Using the Vaddio Deployment Tool 19

Manual Access and Initial Device Set-Up 20

Initial Access to the Web Interface 20

Access the Web Interface of an EasyIP Decoder or EasyIP Mixer Manually 21

Access the Web Interface of an EasyIP Camera Manually 22

Next Steps for New Deployments 23

Web Interface Quick Reference 24

EasyIP Decoder Basic Operation – Operator's Pages 24

EasyIP Mixer Basic Operation – Operator's Pages 24

Administrative Pages 24

System Administration 26

Setting Passwords and Access 26

Configuring Other Security Settings 27

Changing the Hostname 28

Specifying Time Zone and NTP Server 28

Adding Room Information to the Device's Web Interface 29

Configuring System Behavior 30

Locating and Pairing to Cameras on the Network – EasyIP Decoder 30

Locating and Pairing to Cameras on the Network – EasyIP Mixer 32

Configuring Streaming Behavior 33

Viewing a Stream 33

Configuring USB Streaming 33

Configuring the USB Stream Format for Specific Applications 34

Locating and Pairing to Dante Devices 35

Configuring Audio Settings 37

Muting All Audio Inputs Together 37

Muting and Controlling Volume Per Input or Output 38

Enabling Phantom Power to Microphones – EasyIP Mixer 39

About Echo Cancellation 39

Fine-Tuning Microphone Performance – EasyIP Decoder 40

Fine-Tuning Microphone Performance – EasyIP Mixer 41

Fine-Tuning Speaker Performance – EasyIP Decoder 43

Fine-Tuning Speaker Performance – EasyIP Mixer 44

Synchronizing Audio with Video in the USB Stream – EasyIP Mixer 45

Routing Audio – EasyIP Mixer 46

Working with Video – EasyIP Decoder 48

Working with Video – EasyIP Mixer 49

Working with the EasyIP Mixer's Video Inputs 49

Configuring the EasyIP Mixer's Video Output 50

Working with Graphics – EasyIP Mixer 50

Setting up Macros and Triggers 53

Writing and Editing Macros 54

Testing Macros 55

Assigning Macros to Triggers 57

Testing Triggers 58

iii

Complete Manual for EasyIP Systems

Example: Assigning a Function to the Connected Microphone's Home Button 58

Locking the Front Panel Controls – EasyIP Mixer 59

Configuring System Standby Behaviors 59

Configuring and Adjusting Cameras 60

Setting Cameras to Respond Independently to the IR Remote 61

Inverting the Image for Ceiling-Mounted Cameras 61

Setting the Home Position and Other Preset Shots 62

Renaming Presets 63

Adjusting the Color and Image Quality Settings 63

Lighting and Image Quality Quick Reference 64

Color Adjustment Quick Reference 65

Setting the Speeds for Manual Camera Movements 65

Setting the Speeds of Camera Movements to Presets 66

Setting the Direction for Camera Movements 66

Adjusting the Focus 67

Camera Indicator Light Settings 67

Other Camera Behavior Settings 68

System Maintenance 69

Saving (Exporting) or Restoring (Importing)a Configuration 70

Installing a Firmware Update 71

Installing a Firmware Update for a Connected Vaddio Microphone – EasyIP Decoder 72

Rebooting the Device 72

Using the Camera's Remote Control 73

Quick Reference 73

IR Remote Details 74

Storing a Preset Using the Remote 74

Clearing a Preset Using the Remote 74

Operating the System Using the Web Interface 75

Quick Steps: Muting and Standby 75

Working with Audio 76

Moving the Camera to a Preset Position 76

Accessing Camera Controls 77

Moving the Camera Manually 77

Selecting a PIP Source and Layout 78

Working with On-Screen Graphics – EasyIP Mixer 78

Telnet Serial Command API 80

Camera Commands 81

camera home 81

camera pan 82

camera tilt 83

camera zoom 84

Complete Manual for EasyIP Systems

camera focus 85

camera preset 86

camera ccu get 87

camera ccu set 88

camera standby 89

camera led 90

camera icr 90

Video Management Commands 91

video mute 91

video pip 92

video source 92

video type 93

Audio Management Commands 94

audio mute 94

audio volume 95

audio route 96

audio crosspoint-gain 97

Communication and Network Commands 98

camera authenticate 98

camera comm host 98

streaming settings get 99

network settings get 99

Control and Power Commands 100

trigger 100

camera standby 101

system standby 102

Maintenance and Troubleshooting Commands 103

camera recalibrate 103

network ping 103

system reboot 104

system factory-reset 104

version 105

Telnet Information and Session Management Commands 106

history 106

help 106

exit 106

Specifications 107

EasyIP 10 Camera 107

EasyIP Decoder 107

EasyIP Mixer 108

Troubleshooting and Care 109

Complete Manual for EasyIP Systems

System and Power issues 109

Camera 110

Audio 110

Status Indicator Light 111

Correct a Camera Motor Calibration Error 111

Restoring Factory Default Settings 113

Contacting Vaddio Technical Support 114

Viewing Diagnostic Logs 114

Operation, Storage, and Care 115

Glossary 116

Compliance and Conformity Statements 119

FCC Part 15 Compliance 119

ICES-003 Compliance 119

European Compliance 120

Photo Credits 121

Index 122

Complete Manual for EasyIP Systems

Overview

This guide discusses the following products:

nEasyIP 10AV-over-IP PTZ camera, 999-30200-000 (black, worldwide)

EasyIP 10 AV-over-IP PTZ camera, 999-30200-000W (white, worldwide)

nEasyIP Decoder AV-over-IP switching USB endpoint, 999-60210-000 (worldwide)

nEasyIP Mixer AV switcher, 999-60320-000 (worldwide)

What's in this Guide

This guide covers

nUnpacking

nPhysical features

nInstallation

nSystem administration and performance/behavior configuration

nTelnet API reference

nSpecifications

nTroubleshooting

nWarranty and compliance/conformity information

For your convenience, the information you need to install EasyIP products is available in the smaller,

stand-alone Installation Guide for EasyIP AV-over-IP Systems.

The EasyIP Ecosystem

Vaddio®EasyIP products are designed to be used together, and have limited or no compatibility with other

types of products.

nEasyIP cameras deliver video in Vaddio's proprietary EasyIP format.

nAn EasyIP Decoder or EasyIP Mixer is required to convert the cameras' output signal to an IP and/or

USB stream.

nThe decoder and mixer do not recognize other types of cameras.

nThe decoder or mixer automatically detects EasyIP cameras on its own subnet.

nCameras are not required to be on the same subnet as the device that manages them.

nEasyIP products require PoE+ power. Typically the EasyIP system is powered by a PoE+ switch.

EasyIP Cameras

EasyIP cameras may be installed anywhere on the network. They require only a PoE+ power connection.

An EasyIP Decoder or EasyIP Mixer is needed to decode the AV-over-IP signal.

EasyIP Decoder

The decoder is the central component of a basic EasyIP installation. Its functions include

nVideo – pair with up to four cameras at a time, control the active camera via web interface, and decode

the camera's AV-over-IP signal.

nAudio – connect two Vaddio microphones and a speaker.

nUSB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing

applications.

EasyIP Mixer

The mixer is the central component of a full-featured EasyIP pro AV room solution. Its functions include

nVideo – pair with up to four cameras at a time, control the active camera via web interface, and decode

the camera's AV-over-IP signal.

nAudio – connect two microphones and two speakers; pair with Dante®audio products on your network.

Built-in audio mixer.

nUSB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing

applications.

PoE+ Switch

A PoE+ switch simplifies installation, eliminating the need for PoE+ power injectors and placing all the

connected products on the same subnet.

Camera Features

n2.14 Megapixel effective, native 1080p/60 full HD image sensor

n10x optical zoom, horizontal field of view of 67°

nResolutions up to 1080p/60

nPrecise pan and tilt movements at up to 90° per second

nIntegration-ready Telnet control

nPairs with an EasyIP Decoder, which provides video and audio connectivity and manages streaming

nJust one cable – the EasyIP connection to a PoE switch

nEnterprise-class IT administrative capabilities with full web controls for remote management

Complete Manual for EasyIP Systems

Decoder Features

nUncompressed USB 3.0 streaming

nStreaming video resolutions up to 1080p/60

nFull-duplex audio streaming

nAudio inputs for two Vaddio microphones

nHDMI video output for local display

nUniversal Video Class (UVC) and Universal Audio Class (UAC) drivers supported in Windows®,

macOS®, and Linux operating systems, compatible with most UC conferencing applications

nIntegration-ready Telnet control

nPairs with up to four EasyIP 10 cameras on your network to provide control and manage streaming

nEnterprise-class IT administrative capabilities with full web controls for remote management

Mixer Features

nUncompressed USB 3.0 streaming

nStreaming video resolutions up to 1080p/60

nFull-duplex audio streaming

nLine-level inputs for two microphones

nLine-level outputs for two speakers

nAudio mixer and video switcher

nSupport for Dante®microphones and speakers

nHDMI video output for local display

nUniversal Video Class (UVC) and Universal Audio Class (UAC) drivers supported in Windows®,

macOS®, and Linux operating systems, compatible with most UC conferencing applications

nIntegration-ready Telnet control

nPairs with up to four EasyIP 10 cameras on your network to provide control and manage streaming

nEnterprise-class IT administrative capabilities with full web controls for remote management

Complete Manual for EasyIP Systems

Unpacking the EasyIP System Components

Make sure you received all the items you expected.

EasyIP 10 AV-over-IP PTZ Camera

Worldwide: 999-30200-000 (black), 999-30200-000W (white)

The box should contain these items:

nCamera (black or white)

nVaddioIR Remote Commander

nThin Profile Wall Mount with mounting hardware

nCat-5e cable, 10 ft. (3 m)

nQuick-Start Guide

Caution

Always support the camera's base when lifting or moving it. Lifting the camera by its head or mounting arm

will damage it.

EasyIP Decoder AV-over-IP Switching USB Endpoint

Worldwide: 999-60210-000

The box should contain these items:

nEasyIP Decoder

nUSB 3 cable, 6 ft. (1.8 m)

nCat-5e cable, 3 ft. (0.9 m)

n4-position Phoenix-type connector

nHalf-rack mounting kit

nQuick-Start Guide

Complete Manual for EasyIP Systems

Altri manuali per EasyIP Systems

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali VADDIO Sistema di conferenza

VADDIO

VADDIO WideSHOT 999-6911-000 Manuale utente

VADDIO

VADDIO ConferenceSHOT AV Manuale utente

VADDIO

VADDIO GroupSTATION Manuale utente

VADDIO

VADDIO ConferenceSHOT AV Manuale utente

VADDIO

VADDIO EasyIP Systems Manuale utente

VADDIO

VADDIO AV BRIDGE MATRIX PRO Manuale utente

VADDIO

VADDIO ConferenceSHOT AV Manuale utente

VADDIO

VADDIO ConferenceSHOT AV Manuale utente

VADDIO

VADDIO BaseStation 999-8920-000 Manuale utente

VADDIO

VADDIO HUDDLESTATION Manuale operativo

VADDIO

VADDIO OneLINK Bridge Manuale utente

VADDIO

VADDIO PowerVIEW HD-30 Manuale utente

VADDIO

VADDIO BaseSTATION Manuale utente

VADDIO

VADDIO ConferenceSHOT AV Manuale utente

VADDIO

VADDIO ConferenceSHOT AV Manuale utente

VADDIO

VADDIO GroupSTATION 999-8900-000 Manuale utente

VADDIO

VADDIO EasyMic MicPOD Manuale utente

VADDIO

VADDIO ConferenceSHOT AV Manuale utente

VADDIO

VADDIO ConferenceSHOT AV Manuale utente

VADDIO

VADDIO WallVIEW HD-USB PRO System Manuale utente

VADDIO

VADDIO EasyTalk Manuale utente

VADDIO

VADDIO HUDDLESTATION Manuale utente

VADDIO

VADDIO Quick-Connect CCU H900 Manuale utente

Manuali Sistema di conferenza popolari di altre marche

Kramer

Kramer VIA GO Manuale utente

AVT

AVT MAGIC AC1 Go Manuale utente

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuale utente

Sony

Sony PCS-I150 Manuale utente

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuale utente

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guida

Speakerbus

Speakerbus iD 712 Manuale utente

Trelleborg

Trelleborg SafePilot CAT PRO Manuale utente

Sennheiser

Sennheiser ADN Manuale utente

ADTRAN

ADTRAN NetVanta 7100 Manuale utente

AINA

AINA PTT Voice Responder Manuale utente

Yamaha

Yamaha ProjectPhone PJP-100H Manuale utente

vissonic

vissonic VLI Series Manuale utente

Panasonic

Panasonic KX-VC500 Manuale utente

Poly

Poly Trio 8300 Manuale utente

Crestron

Crestron Mercury CCS-UCA-SMK Disegno dimensionale

Inmarsat

Inmarsat mini M Manuale utente

Tenveo

Tenveo ALL-IN-ONE Manuale utente