VADDIO PrimeSHOT 20 HDMI Manuale utente

Installation Guide for

PrimeSHOT 20 HDMI

PTZ Camera

Document 411-0022-31 Rev B

July 2018

Contents

Overview 1

What's in this Guide 1

Features 1

Unpacking the Camera 2

A Quick Look at the Camera 3

Front of the Camera 3

Back of the Camera 4

Video Resolution Setting 4

Installation 5

Before You Install the Camera 5

Don’t Void Your Warranty! 5

Cabling Notes 5

Installing the Thin Profile Wall Mount 6

About Ceiling-Mounted Cameras 6

Basic Connection Diagram 6

RS-232 Serial Communication 7

Installing the Camera 8

Powering Up the Camera 9

Status Light 9

Next Steps 10

Operation, Storage, and Care 10

Compliance Statements and Declarations of Conformity 11

FCC Part 15 Compliance 11

ICES-003 Compliance 11

European Compliance 12

Warranty Information 13

Photo Credits 14

Index 15

Overview

This guide covers the PrimeSHOT™ 20 HDMI PTZ camera:

nPrimeSHOT 20 HDMI (black), North America – 999-30420-000

nPrimeSHOT 20 HDMI (white), North America – 999-30420-000W

nPrimeSHOT 20 HDMI (black), Europe and UK – 999-30420-001

nPrimeSHOT 20 HDMI (white), Europe and UK– 999-30420-001W

nPrimeSHOT 20 HDMI (black), Australia and New Zealand – 999-30420-009

nPrimeSHOT 20 HDMI (white), Australia and New Zealand – 999-30420-009W

nPrimeSHOT 20 HDMI (black) with HDMI Extenders, North America – 999-30420-

300

nPrimeSHOT 20 HDMI (white) with HDMI Extenders, North America – 999-30420-300W

nPrimeSHOT 20 HDMI (black) with HDMI Extenders, Europe and UK – 999-30420-301

nPrimeSHOT 20 HDMI (white) with HDMI Extenders, Europe and UK – 999-30420-301W

nPrimeSHOT 20 HDMI (black) with HDMI Extenders, Australia and New Zealand – 999-30420-309

nPrimeSHOT 20 HDMI (white) with HDMI Extenders, Australia and New Zealand – 999-30420-309W

What's in this Guide

This guide covers:

nUnpacking the camera

nTips for a successful installation

nInstructions for installing the camera mount

nInformation on connecting and mounting the camera

nCamera power-on

Complete product information is available in the Integrator's Complete Guide to the PrimeSHOT 20

HDMI PTZ Camera.

Features

nPTZ camera for medium to large venues such as houses of worship and lecture theaters

n2.12 Megapixel effective, native 1080p/60 full HD image sensor

n20x optical zoom, 55° horizontal field of view (wide end)

nSimultaneous HDMI 1.3, S-Video, and IP streaming outputs

nPrecise pan and tilt movements at up to 90° per second

nPresenter-friendly IR remote control

nIntegration-ready Telnet or serial RS-232 control

nFull administrative control via web interface; manage the camera remotely while monitoring the stream

separately

Unpacking the Camera

Make sure you received all the items you expected.

Caution

Always support the camera's body when lifting or moving it. Lifting the camera by its head or mounting arm

will damage it.

999-30420-000 – PrimeSHOT 20 HDMI (black), North America

999-30420-000W – PrimeSHOT 20 HDMI (white), North America

999-30420-001 – PrimeSHOT 20 HDMI (black), Europe and UK

999-30420-001W – PrimeSHOT 20 HDMI (white), Europe and UK

999-30420-009 – PrimeSHOT 20 HDMI (black), Australia and New Zealand

999-30420-009W – PrimeSHOT 20 HDMI (white), Australia and New

Zealand

nPrimeSHOT 20 HDMIcamera

nThin Profile Wall Mount with mounting hardware

nVaddio IR Remote Commander

n12 VDC, 3.0 Amp power supply with AC cord set(s)

nEZCamera RS-232 control adapter

nQuick-Start Guide

999-30420-300 – PrimeSHOT 20 HDMI (black) with HDMI Extender, North America

999-30420-300W – PrimeSHOT 20 HDMI (white) with HDMI Extender,

North America

999-30420-301 – PrimeSHOT 20 HDMI (black) with HDMI Extender,

Europe and UK

999-30420-301W – PrimeSHOT 20 HDMI (white) with HDMI Extender,

Europe and UK

999-30420-309 – PrimeSHOT 20 HDMI (black) with HDMI Extender,

Australia and New Zealand

999-30420-309W – PrimeSHOT 20 HDMI (white) with HDMI Extender,

Australia and New Zealand

nPrimeSHOT 20 HDMIcamera

nThin Profile Wall Mount with mounting hardware

nVaddio IR Remote Commander

n12 VDC, 3.0 Amp power supply with AC cord set(s)

nEZCamera RS-232 control adapter

nQuick-Start Guide

nC2G HDMI Extender Transmitter unit

nC2G HDMI Extender Receiver unit

n5VDC 1.0A Extender power supply with regional plugs, quantity 2

n1 ft (0.3 m) HDMI cable

nC2G HDMI Extenders User Booklet

Installation Guide for the PrimeSHOT 20 HDMI PTZ Camera

A Quick Look at the Camera

This section covers the physical features of the camera.

Front of the Camera

Camera and Zoom Lens: The PrimeSHOT 20 HDMI camera features a 20x optical zoom lens.

IR sensor: Receives signals from the IR remote. Make sure there's nothing directly in front of the camera

base, and point the remote at the camera.

Status light: The multi-colored LED indicates the camera's current state. This light can be turned off.

nBlue – Camera is active

nRed – Tally

nPurple – Standby mode or booting

nYellow – Firmware update is in progress

nBlinking red – Video mute is on (UC color scheme only)

nBlinking yellow – Motor out of calibration

nBlinking purple – Error

Note

By default, the camera's status light is active during normal operation; however, it can be configured to

remain off when the camera is powered up. The camera may be sending video even if the indicator light is

off.

Installation Guide for the PrimeSHOT 20 HDMI PTZ Camera

Back of the Camera

From left to right:

nPower connector – Connect the 12 VDC, 3 A power supply shipped with the camera.

nRotary switch – Select the video output resolution.

nEthernet connector – Connect to the network.

nRS-232 connector – Optional. Connect to a camera controller to manage the camera.

nS-Video connector – S-Video output; can be set to NTSC or PAL.

nHDMI connector – HDMI 1.3 video output.

Video Resolution Setting

Use the rotary switch on the back of the camera to set the desired HDMI output resolution.

The S-Video output can be set to PAL or NTSC in the administrative interface (see Setting Other Camera

Behaviors). Default is NTSC.

Installation Guide for the PrimeSHOT 20 HDMI PTZ Camera

Installation

This section covers:

nSelecting the location for the camera

nInstalling the mount

nConnecting the camera

nMounting the camera

Before You Install the Camera

nChoose a mounting location that will optimize camera performance. Consider camera viewing angles,

lighting conditions, line-of-sight obstructions, and in-wall obstructions where the camera is to be

mounted.

nEnsure that the camera body can move freely and will normally point away from the ceiling and lights.

The camera will not perform well if it is pointed toward a light source such as a light fixture or window.

nFollow the installation instructions included with the camera mount.

Don’t Void Your Warranty!

Caution

This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate

protective enclosure. Do not allow it to come into contact with any liquid.

Use only the power supply included with this product. Using a different one will void the warranty, and

could create unsafe operating conditions or damage the product.

Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these

things happen, return it to Vaddio for safety and functional testing.

Cabling Notes

Note

Use standard RJ-45 connectors and a good crimping tool. Do not use pass-through RJ-45

connectors. Poorly crimped connectors can damage the connectors on the product, cause

intermittent connections, and degrade signal quality. Test cable pin-outs and continuity before connecting

them.

Intact – will make reliable contact

with cable connector

Damaged – Bent contact fingers

will NOT make reliable contact

with cable connector

Pro Tip

Label all cables at both ends.

Installation Guide for the PrimeSHOT 20 HDMI PTZ Camera

Installing the Thin Profile Wall Mount

The PrimeSHOT 20 HDMI camera is shipped with a Thin Profile Wall Mount. Other mounting options are

available as well. Contact us if you don’t have the camera mount you need.

You can install the camera wall mount to a 2-gang wall box or directly to the drywall.

nIf you mount it to drywall, use the wall anchors provided with the wall mount.

nIf you mount it to a wall box, use the cover plate screws supplied with the wall box.

If you install the camera wall mount to drywall, use the wall anchors provided with the mount.

About Ceiling-Mounted Cameras

If you use an inverted mount, set the camera's Image Flip soft DIP switch ON.

Basic Connection Diagram

The Quick-Start Guide for the PrimeSHOT 20 HDMI PTZ Camera provides additional information.

Installation Guide for the PrimeSHOT 20 HDMI PTZ Camera

RS-232 Serial Communication

The RS-232 serial port (RJ-45, color-coded blue) on the camera's back panel enables third-party control.

Parameter Value

Communication Speed 9600 bps (default)

Number of start bits 1

Number of stop bits 1

Number of data bits 8

Parity None

Flow control None

Connector pin-out:

nPin 1: Not used

nPin 2: Not used

nPin 3: Not used

nPin 4: Not used

nPin 5: Not used

nPin 6: GND

nPin 7: RXD (from TXD of control source)

nPin 8: TXD (to RXD of control source)

Caution:

Check Cat-5 cables for continuity before using them. Using the wrong pin-out may damage the camera

system and void the warranty. Pro tip: Label your cables.

Installation Guide for the PrimeSHOT 20 HDMI PTZ Camera

Installing the Camera

Caution

Before you start, be sure you can identify all cables correctly. Connecting a cable to the wrong port can

result in equipment damage.

Caution:

Check Cat-5 cables for continuity before using them. Using the wrong pin-out may damage the camera

system and void the warranty. Pro tip: Label your cables.

1. Verify that you have set the switch on the back of the camera to the desired video resolution.

2. Route the cables through the opening in the mounting shelf and connect them to the camera.

Caution:

Use the power supply shipped with the camera. Using a different power supply will damage the camera

and void the warranty, and may create an unsafe operating condition.

3. Place the camera on the mount.

4. Attach the camera to the mount using the mounting screw supplied with the camera.

Image for illustration only; not to scale. Camera and mount details may differ.

Note

If the camera is jostled or bumped, it may require a pan-tilt reset.

Installation Guide for the PrimeSHOT 20 HDMI PTZ Camera

Altri manuali per PrimeSHOT 20 HDMI

Indice

Altri manuali VADDIO Telecamera di sicurezza

VADDIO

VADDIO PTZCam 100 Manuale utente

VADDIO

VADDIO CeilingVIEW 70 PTZ HideAway Manuale utente

VADDIO

VADDIO ZOOMSHOT 20 Manuale utente

VADDIO

VADDIO CLEARVIEW HD-18 Manuale utente

VADDIO

VADDIO WALLVIEW DVI/HDMI HD-20 Manuale utente

VADDIO

VADDIO WallVIEW CCU HD-18 HD-SDI Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

VADDIO

VADDIO RoboSHOT USB Series Manuale utente

VADDIO

VADDIO ZoomShot 999-6920-000 Manuale utente

VADDIO

VADDIO CeilingVIEW 70 PTZ Manuale utente

VADDIO

VADDIO WallView Manuale utente

VADDIO

VADDIO CLEARVIEW HD-20SE Manuale utente

VADDIO

VADDIO AutoTrak 2.0 Manuale utente

VADDIO

VADDIO WALLVIEW DVI/HDMI HD-20 Manuale utente

VADDIO

VADDIO CeilingVIEW 70 PTZ HideAway Manuale utente

VADDIO

VADDIO VADDIO/CANON BU Series Manuale utente

VADDIO

VADDIO WIDESHOT WALLVIEW MINI 999-6911-100 Manuale utente

VADDIO

VADDIO WallVIEW 50i PTZ HideAway Manuale utente

VADDIO

VADDIO RoboSHOT 12 HDMI Manuale utente

VADDIO

VADDIO ConferenceSHOT 10 Manuale utente

VADDIO

VADDIO POWERVIEW HD-22 QSR Manuale utente

VADDIO

VADDIO ZOOMSHOT 20 Manuale utente

VADDIO

VADDIO 999-9200-050 Manuale utente

VADDIO

VADDIO WALLVIEW PRO H700 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente