Vanco Evolution EVMX4008 Manuale utente

Vanco Part Number

EVMX4008

HDBaseT 8x8 Matrix

Selector Switch

(230ft/70m)

www.vanco1.com • 800.626.6445

HDBaseT™ 8x8

MATRIX SELECTOR SWITCH

(230ft/70m)

www.vanco1.com 800.626.6445

1. Do not expose this unit to water,

moisture, or excessive humidity.

2. Do not install or place this unit

in a built-in cabinet, or other

conned space without adequate

ventilation.

3. To prevent risk of electrical shock

or re hazard, due to overheating

do not obstruct unit’s ventilation

openings.

4. Do not install near any source of

heat, including other units that

may produce heat.

5. Do not place unit near ames.

6. Only clean unit with a dry cloth.

7. Unplug unit during lightening

storms or when not used for

an extended period of time.

A surge protector is strongly

recommended.

8. Protect the power cord from

being walked on or pinched,

particularly at the plugs.

9. Use unit only with accessories

specied by the manufacturer.

10. Refer all servicing to qualied

personnel.

CAUTION

HDMI is a very complex technology requiring continuous authentication of the signal

and the same video resolution and audio settings on all electronic equipment in the

system. When there are multiple sources and displays, the video resolution and

audio setting on all connected units must be adjusted to correspond with that of the

display having the lowest video and audio capability.

WARNING

DEAR CUSTOMER

Thank you for purchasing this product.

For optimum performance and safety, please

read these instructions carefully before connecting,

operating or adjusting this product. Please keep this

manual for future reference.

This product is 100% inspected and tested in the United

States to verify HDMI performance parameters.

www.vanco1.com 800.626.6445 3

INTRODUCTION

The Evolution by Vanco EVMX4008 8X8 Matrix with HDBaseT Technology, Wide-band IR, and PoE is

an HD switching and extension system that comprises of an 8 input/8 output matrix unit. Have 8

sources displayed simultaneously on any display or have a single source duplicated on multiple displays,

exibility for the perfect solution. Features HDBaseT (70m/230ft) technology, which allows for audio,

1080p video, IR, and Power over Cable to be transferred over a single Cat5e/6/7 cable up to 230

feet. Also features Power over Ethernet (PoE) Technology which transmits power over Cat5e/6, allowing

for Receiver unit to be powered without the use of a power supply. The result is an easy and plug and

play solution that allows each output with the ability to extend HDMI over long distances in conjunction

with the Evolution by Vanco HDBaseT (70m/230ft) receiver EVRX3000 (sold separately). Features

additional HDMI output per HDBaseT output for exibility or mirroring capability, able to handle up to 16

displays. With an output bandwidth of 6.75 Gbps, the EVMX4008 is capable of high denition video and

multi-channel audio distribution with simple control using the front panel or remotely via IR Receivers at

display locations. Includes RS-232 connectivity for third party integration for control and switching, as

well as IP control along with LAN connectivity for control and switching remotely, using a smartphone or

tablet. Also features EDID management system, which allows and encourages device communication

compatibility for seamless integration. For longer length applications with full exibility for control, the

EVMX4008 is a great solution.

FEATURES

www.vanco1.com 800.626.6445

HDBaseT 8x8 Matrix Selector Switch (230ft/70m)

Part # EVMX4008

• Allows up to 8 HDMI sources to be distributed simultaneously to up to 8 displays

• 8 additional HDMI outputs for exibility or mirroring capability; allows for connection of

up to 16 displays or the ability to create a larger distribution system by cascading or

daisy chaining

• HDBaseT Technology that supports HDMI Deep Color, 3D, and up to 1080p High

Denition resolution

• Supports Power Over Ethernet (PoE) which integrates power into the Cat5e/Cat6

cable, requiring no power supply for receiving unit

• Transmission Range: Extends 1080p resolutions up to 230ft (70m)

• Features EDID management which supports default HDMI EDID and has the ability to

learn the EDID of display equipment for any “handshake” issues via RS-232 connectivity

• Receivers (sold separately) feature LED indicators for clear power and video signal

selection

• HDCP Compliant

• Supports HDMI Deep Color and 3D

• Supports 7.1 channel digital audio

• Wideband IR pass-through (20kHz to 60 kHz)

• Choose from 5 switching modes – front panel buttons, Local remote control, RS-232

control, IR call-back (dedicated IR extension cable connected to IR extension port, and

IR emitters on sources required), and IP control utilizing smartphone or tablet via LAN

• 24V 8.3A DC, UL Listed Power supply for 8X8 matrix

• 8X8 Matrix Dimensions: 17.26” (438.4 mm) W x 3.4” (86.4 mm) H x 12.56” (318.9

mm) D

www.vanco1.com 800.626.6445 5

SPECIFICATIONS

TECHNICAL SPECS

HDCP Compliance...................................................... Yes

Video Bandwidth ........................................................ Single-link 340Mhz [10.2 Gbps]

Video Support ........................................................... 480i/480p/720p/1080i/1080p @60 36-bit color

Audio Support ........................................................... Surround Sound (up to 7.1 ch) or stereo digital audio

ESD Protection .......................................................... [1] Human body model — ±19kV [air-gap discharge]

& ±12kV [contact discharge] [2] Core chipset — ±8kV

PCB stack-up ............................................................ 4-layer board [impedance control — differential

100Ω; single 50Ω]

Input ........................................................................ 8x HDMI / 1x RS-232 / 1x RJ-45 for IP Control / 9x

IR for IR receivers

Output...................................................................... 8x RJ-45 (HDBaseT) / 8x HDMI / 9x IR for IR

blasters

HDMI connector ........................................................ Type A 19 pin female

RJ-45 connector........................................................ WE/SS 8P8C with 2 LED indicators

RS-232 connector ..................................................... DE-9 [9-pin D-sub female]

3.5mm connector ...................................................... Earphone jack for IR blaster; [All IR Out] IR signal

from all outputs; [IR1~IR8] IR control on individual source device; Earphone jack for IR receiver; [System IR]

Receives IR commands from remote control; [IR1~IR8] Receives IR commands from individual remote control

MECHANICAL SPECS

Housing .................................................................... Metal enclosure

Power supply............................................................. 24V 8.3A DC

Power consumption.................................................... 120 Watts [max]

Operation temperature............................................... 32-104 degrees F

Storage temperature.................................................. -4 - 140 degrees F

Relative humidity ....................................................... 20-90% RH (no condensation)

PACKAGE CONTENTS

• (1) EVMX4008 HDBaseT 8X8 Matrix Selector Switch

• (9) IR Receiver (RX)

• (8) IR Blaster (TX)

• (1) DC 24V 8.3A power supply

• (1) Rack-mounting ear set

• (1) Installation software CD

• (1) IR remote control

• (1) User Manual

www.vanco1.com 800.626.6445

1. Power Switch

2. Source Status: Input source indicator LED

3. 7-segment LED: for output 1-8 status

4. IR SENSOR: IR sensor for receiving the IR commands from IR remote

5. Push Button: Select the output and input

6. Push Button: Enter Button

7. RS-232: RS-232 control port

8. +24V DC: 24V DC power jack

9. Ethernet: Ethernet control port

10. IR Receiver 1-8: Infrared 3.5mm socket for plugging in the extension cable of IR

receiver

11. LED Link

12. Output Port 1-8: RJ-45 outputs for each output channel

13. HDMI Local Loopout Port 1-8: Local loopout HDMI outputs for each output channel

14. IR Blaster 1-8: 3.5mm IR blaster socket for individual HDMI source control

15. System IR Receiver: Ext. IR receiver

16. All IR Output: 3.5mm IR blaster socket for HDMI source control on all 8 inputs

17. INPUT 1-8: HDMI inputs

PANEL DESCRIPTIONS

www.vanco1.com 800.626.6445 7

1 2 3 4 5 6

7 8

PANEL DESCRIPTIONS RECEIVER -

Part#EVRX3000 (Sold Separately)

1. 24V DC: Connect to 24V DC power supply (optional)

2. LED: Power indicator

3. HDMI OUT: Connects to an HDMI display with an HDMI male-male cable

4. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster

5. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver

6. Mini-USB: For rmware updates

7. LED: TX/RX link indicator

8. RJ-45: Plug in for Cat5e or Cat6 Cable

www.vanco1.com 800.626.6445

1. Full-HD(1080p@60)-24bit 2D & 2ch & Dolby 5.1ch

2. Full-HD(1080p@60)-24bit 2D & 7.1ch

3. Full-HD(1080p@60)-24bit 3D & 2ch

4. Full-HD(1080p@60)-24bit 3D & 7.1ch

5. HD(1080i@60)(720p@60)-24bit 2D & 2ch

6. HD(1080i@60)(720p@60)-24bit 2D & 7.1ch

7. Full-HD(1080p@60)-36bit 2D & 2ch

8. Full-HD(1080p@60)-36bit 2D & 7.1ch

9. Full-HD(1080p@60)-24bit 2D & 2ch

EDID

EDID Settings:

There are nine embedded default EDID settings as shown below:

EDID

EDID management allows for EDID learning or to pre-set an EDID to encourage a “handshake” between the

display and source.

The EDID learning function is only necessary whenever any display on the HDMI output port is not outputting

audio and video properly. Because the HDMI source devices and displays may have various level of capability in

playing audio and video, the general principle is that the source device will output the lowest standards in audio

format and video resolutions to be acceptable among all HDMI displays connected. In this case, a 720p stereo

HDMI signal output would be probably the safest choice. The EDID function can also force the matrix to learn

the EDID of the lowest capable HDMI display among others to make sure all displays are capable to play the

HDMI signals normally.

There are 3 methods for EDID Learning as shown below:

1. IR Remote Control: Please refer to the Operation Control - IR Remote Control

2. Software Control: Please refer to the Operation Control - Software Control through RS-232 and LAN port

3. Web Interface Control: Please refer to the Operation Control – Web Interface Control

www.vanco1.com 800.626.6445 9

OPERATION CONTROL - FRONT

PANEL

1. INPUT/OUTPUT MAPPING

• Use the “LEFT” or “RIGHT“ push button to select the output desired to switch sources

to.

• Use the “UP” or “DOWN“ push button to select the specic source.

• Press “SET” to conrm

www.vanco1.com 800.626.6445

OPERATION CONTROL - IR

REMOTE CONTROL

1. INPUT/OUTPUT Switch - Push the corresponding button on the remote to select Input & Output port.

2. Function Key

Button Function

OFF Standby mode

ON Power on the matrix switcher

MUTE Turn off output’s video and audio

STATUS Preset output status

SAVE Save current mapping mode

PRESET Preset mapping mode

DEFAULT EDID Begin default EDID selection

LEARN EDID Begin EDID learning from one output

CLEAR Clear the previous IR operation procedure

TAKE Trigger the previous setting

F1 Reserved

F2 Reserved

Operation Procedure 7-Segment LED

IN/OUT Switch Output Number (1~8) + Input Number (1~8)

Ex: Input 2 To Output 3 1. Press output number key “3” to select Output 3

2. Press input number key “2” twice to select Input 2

Indice

Altri manuali Vanco Commutatore a matrice

Vanco

Vanco VPW-280799 Manuale utente

Vanco

Vanco 280564 Istruzioni per l'installazione

Vanco

Vanco Evolution EVMX4K08 Manuale utente

Vanco

Vanco VPW-280795 Manuale utente

Vanco

Vanco 280719 Manuale utente

Vanco

Vanco Evolution EVMX4K42 Manuale utente

Vanco

Vanco HDBaseT Lite Manuale utente

Vanco

Vanco 280568 Manuale utente

Vanco

Vanco VPW-280781 Manuale utente

Vanco

Vanco 4x3 HDBaseT Istruzioni per l'installazione

Vanco

Vanco Evolution EVMX4K16 Manuale utente

Vanco

Vanco Evolution EVMX4044 Istruzioni per l’uso

Vanco

Vanco Evolution EVMX44SL Manuale utente

Vanco

Vanco 280688 Manuale utente

Vanco

Vanco Evolution EVMX4K44 Manuale utente

Vanco

Vanco Evolution EVMX4442 Manuale utente

Vanco

Vanco EVMX4X3 Manuale utente

Vanco

Vanco 281442 Manuale utente

Vanco

Vanco EVOLUTION EVMX42MV Manuale utente

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

CYP

CYP nT15GX01 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette