Vanderbilt CHSM2210 Manuale utente

CHSM2210/2211

Medium Camera Housing

Installation Guide

Data and design subject to change without notice. / Supply subject to availability.

We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights

and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our

prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.

Contents

1Safety .......................................................................................................5

1.1 Target group..............................................................................................5

1.2 General safety precautions.......................................................................5

1.3 Meaning of the signal words .....................................................................6

1.4 Meaning of the hazard symbols................................................................6

2EU Directives...........................................................................................7

3Technical data .........................................................................................8

3.1 Specifications............................................................................................8

3.2 Mechanical dimensions.............................................................................9

3.3 Key to parts...............................................................................................9

4Scope of delivery ..................................................................................10

5Installation .............................................................................................11

5.1 Accessing the inside of the housing enclosure.......................................11

5.2 Fitting the power supply modules ...........................................................12

5.3 Cable entry into the camera housing ......................................................14

5.4 Fitting the camera and lens.....................................................................14

5.5 Mounting the camera housing assembly ................................................15

5.6 Connecting to the power supply..............................................................16

5.7 Adjusting the sunshield...........................................................................17

6Maintenance and service .....................................................................18

7Disposal .................................................................................................18

Safety

1 Safety

1.1 Target group

The instructions in this document are designed only for the following target group.

Target readers

Qualification

Activity

Condition of the

product

Installer

Technical training for

building or electrical

installations.

Installs the product,

individual components

of the product or

replacement parts.

Components of the

product are not yet

installed or need to be

replaced or modified.

1.2 General safety precautions

Read the general safety precautions before operating the device.

Follow all warnings and instructions marked on the device.

Keep this document for reference.

Always pass this document on together with the product.

Please also take into account any additional country-specific, local safety

standards or regulations concerning project planning, operation and disposal of

the product.

It is recommended that all possible work be carried out in a workshop prior to

final installation.

Liability claim

Do not connect the device if it is damaged or any parts are missing.

Do not make any changes or modifications to the device unless they are

expressly mentioned in this manual and have been approved by the

manufacturer.

Use only spare parts and accessories that have been approved by the

manufacturer.

Risk of failure due to incorrect installation

The fuse for the device and the fuse for the electrical system of the building must

be installed separately.

Risk of cable damage due to stress

Use only cable types that are approved for the environmental requirements.

The cable glands used must be appropriate for the cable diameter.

Safety

1.3 Meaning of the signal words

The severity of a hazard is indicated by the following written warning notices.

Signal word

Type of hazard

CAUTION

There is a risk of minor to medium injuries or damage to property

IMPORTANT

Malfunctioning may result

1.4 Meaning of the hazard symbols

The nature of the hazard is indicated by icons.

Warning of a hazard

EU Directives

2 EU Directives

The product complies with the requirements of the following EU directives. The EU

declaration of conformity is available from:

Vanderbilt

Clonshaugh Business and Technology Park

Clonshaugh

Dublin 17

Ireland

www.vanderbiltindustries.com

EU Directive 2004/108/EC on electromagnetic compatibility

Conformity with the European Directive 2004/108/EC is demonstrated by

compliance with the following standards:

Emitted interference:

EN 61000-3-2

EN 61000-3-3

EN 55022 Class B

Resistance to interference:

EN 50130-4

EU Directive 2006/95/EC “Low-Voltage Directive”

Compliance with the European Directive 2006/95/EC has been proven by testing

according to the following standard:

Safety:

EN 60950-1

Technical data

3 Technical data

3.1 Specifications

Nominal Voltage

CHSM2210: 110 –230 V AC, 50/60 Hz

CHSM2211: 12 –24 V AC, 50/60 Hz

Fuse Rating (Fuse F1)

CHSM2210: 2 A, 250 V AC, 5 x 20 Type (T), HBC

CHSM2211: 5 A, 250 V AC, 5 x 20 Type (T), HBC

Electrical Connections

Main supply connections via fused PCB mounted terminal blocks.

Use crimped ferrules when terminating cables.

6 way pillar terminal block available for user connections.

Cable Entry

1 x 20 mm Cable Gland (6 –12 mm diameter cable range)

2 x 16 mm Cable Glands (5 –10 mm diameter cable range)

Heater

Nominal: 7 W

max.: 25 W

PTC resistor heating element, thermostatically controlled.

Environmental

Operating Temperature

-20 to +60 °C

Ensure fitted equipment has suitable temperature range for the

application (e.g. maximum typical ambient operating temperature of

camera and lens. Ta = 40 °C).

Maximum internal dissipated power

30 W

Relative humidity

Up to 95 % non-condensing

Ingress Protection

IP66, BS EN 60529

Material

Toughened Glass Window

Housing body/Sunshield/Mounting rails: Aluminium extrusions

End caps: Die cast aluminium

Finish

Housing body: Polyester powder coat, RAL9006 White Aluminium

Sunshield: Polyester powder coat, RAL9006 White Aluminium

End caps: Polyester powder coat, RAL7016 Grey

Internal Dimensions (L x W x H)

300 x 85 x 85 mm

Weight

2.5 kg

Suitable Pan and Tilt Units

CDD2425, CDD2416-T, CDAP2316-T, CDAP2416-T

Suitable Brackets

CHBS2815, CDBS4540 + CAHA1040

Technical data

3.2 Mechanical dimensions

Fig. 1 Mechanical dimensions

246 mm

208 mm

3 mm

66 mm

133 mm

76 mm

125 mm

3.3 Key to parts

Fig. 2 Key to parts

Front End Cap

Cable Anchors

Housing Body

Terminal Board

Sunshield

Camera Mounting Slot

Rear End Cap

Demister Assembly

Cable Glands

Window

Scope of delivery

4 Scope of delivery

Camera housing assembly

Installation Guide

Camera fixing screw (¼” BSW x ½” hex hd.)

Camera fixing screw (¼” BSW x ¾” hex hd.)

Spacer block (1.6 mm thick)

Spacer block (3 mm thick)

2.5 mm (across flats) ALLEN Key, long reach

Camera plate insulator

Shoulder washer (to insulate screw from camera mounting plate)

NOTE

The complete assembly should be mounted and tested in the workshop prior to use on-site.

Accessories

Type

Designation

CAPD1210-C230

12 V DC 500 mA PSU 230 V AC input

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Vanderbilt Accessori per fotocamere

Vanderbilt

Vanderbilt CHSM2210-B Manuale utente

Manuali Accessori per fotocamere popolari di altre marche

Viltrox

Viltrox EF-NEX Istruzioni per l'installazione

Calumet

Calumet 7100 Series CK7114 Manuale utente

Ropox

Ropox 4Single Series Manuale utente

Cambo

Cambo Wide DS Digital Series Istruzioni operative

Samsung

Samsung SHG-120 Manuale utente

Ryobi

Ryobi BPL-1820 Manuale operativo

Aegis

Aegis ABL-36020P Manuale utente

Pentax

Pentax Data Back Fc Manuale utente

Fantasea

Fantasea EyeGrabber F Series Manuale utente

Honeywell

Honeywell HDZ20HD Manuale utente

EGO

EGO BA1400T Manuale utente

Sima

Sima SRW-62 Manuale utente

Shape

Shape A7SSMKIT Manuale utente

Slide Kamera

Slide Kamera HST-2 Manuale utente

Power works

Power works 2902613 Manuale utente

SES

SES SE-2047-2 Manuale utente

Olympus

Olympus PT-EP05L Manuale utente

Starlite

Starlite OctoDome nxt Manuale utente