Vangear Mini-Pod Manuale utente
Mini-Pod Instructions
Thank you for purchasing a unit from Vangear. For more information please visit
www.vangear.co.uk
Please check for damages and report them within 48 hours of receiving the unit. Please
keep the original packaging in case you need to return the unit.
We appreciate any feedback about our units. We would also appreciate any photos or
videos of your unit in your van that we could use on Facebook and social media.
e-mail us at: info@vangear.co.uk
https://www.facebook.com/vangearcampervanunits/
https://www.instagram.com/vangear/
The Table/Door
1. Push the button to remove the door
2. The leg is stored in the loop. Remove the leg and insert, then clip onto table rail
3. And reverse to store
The cordless tap
1. Insert the tap holder into the hole and tighten up with the black washer and nut on
the underside
2. Always pre charge prior to a trip the cordless tap via USB and bring a USB charger
with you
3. Push the water hose through holder
4. Insert the hose firmly into the bottom of the tap and push the tap into the holder
5. If you have opted for the conventional tap then push the tap nozzle onto the tap and
simply plug the 12v plug into your closest power source.
Fixing the stove onto the shelf
1. Line up the channel with the holes
2. Remove the lid from the stove and centralise over the channel
3. Fix down with an allen key
Gas stove
1. Use push button to open the stove shelf
2. And pull out stove support (FULLY) to ensure maximum stability
3. To store the stove push in the stove support and depending on the model of the
stove, reverse the top holder and use elastic to secure the hob stand so that it
doesn’t stick out and catch anything. The elastic also retains the canister flap.
Main Safety Points
Always ensure the stove support is fully pulled out!
Always move the stove lever into the unlocked position
Always wait for the stove to cool down before storing
Lock the stove when not in use
Fitting
1. If using the bolts, use the mounting slots to secure to the floor. Always dry fit the
units first. Take care when drilling through the floor, it is easier to mark where you
are drilling with masking tape first.
2. On rails, space apart as far as possible and on one rail
3. Foam can also be used to stop the wing nuts blocking the bottles
Feedback
As this is a new unit we are particularly interested in feedback and photos! Please email
any feedback/photos to info@vangear.co.uk
You can also view our video on our youtube channel called ‘How Does the Vangear Mini-
Pod Work’
Find us at:
Email: info@vangear.co.uk
Tel: 01444 247129
Sam: 07810 592353
www.facebook.com/Vangearcampervanunits
www.youtube.com/c/vangearuk
www.instagram.com/vangear
Design registered and copyrighted at Intellectual Property Office
Indice
Altri manuali Vangear Accessori per automobili
