Vantron VT-TABLET-5081S Manuale utente
VT-TABLET-5081S User Manual
Product Version: 1.0
Date: 2021/11/22
For any question, please contact Chengdu Vantron Technology, Ltd.
Copyright © Vantron Technology, Ltd. All rights reserved.
Change History
This document describes VT-TABLET-5081S briefly and is intended for all readers. This table
describes the version and release date.
No.
Version
Date
Description
Author
1
1.0
2021/11/22
First release.
Kang
Foreword
Copyright
While all information contained herein have been carefully checked to assure its accuracy in
technical details and printing, Vantron assumes no responsibility resulting from any error or
features of this manual, or from improper uses of this manual or the software. Please contact our
technical department for relevant operation solutions if there is any problem that cannot be solved
according to this manual.
Vantron reserves all rights of this manual, including the right to change the content, form, product
features, and specifications contained herein at any time without prior written notice.
The trademarks and registered trademarks in this manual are properties of their respective owners.
No part of this manual may be copied, reproduced, translated or sold. No changes or other
purposes are permitted without the prior written consent of Vantron.
Vantron reserves the right of all publicly-released copies of this manual.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Type
Description
Notice
Important information and regulations
Caution
Caution for latent damage to system or
harm to personnel
Statement & Disclaimer
It is recommended to read and comply with this manual before operating VT-TABLET-5081S which
provides important guidance and helps decreasing the danger of injury, electric shock, fire, or any
damage to the device.
Vantron assumes no legal liability of accidents resulting from failure of conforming to the safety
instructions.
Limitation of Liability/Non-warranty
For direct or indirect damage to this device or other devices of Vantron caused by failure of
conforming to this manual or the safety instructions on device label, Vantron assumes neither
warranty nor legal liability even if the device is still under warranty.
VT-TABLET-5081Sshould be installed, debugged and maintained by professionals.
The outside antennas are not permitted to be installed or to be changed by non-professionals. To
run the device normally, only specified antennas are approved to be assembled together by
professionals.
Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoor.
Safety Instructions
Keep and comply with all operation instructions, warnings, and information.
Pay attention to warnings on this device.
Read the following precautions so as to decrease the danger of injury, electric shock, fire, or
any damage to the device.
Operations and service instructions are provided with the equipment.
Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed
outdoor.
The maximum operation temperature is 40°C.
Precautions
Pay attention to the product labels/safety instructions printed on silk screens.
Do not try repairing this product unless declared in this manual.
Keep away from heat source, such as heater, heat dissipater, or engine casing.
Do not insert other items into the slot (if any) of this device.
Ensure ventilation of the ventilation slot.
System fault may arise if other items are inserted into this device.
Installation: ensure correct installation according to instructions from the manufacturer with
recommended installation tools.
Ensure ventilation and smoothness according to relevant ventilation standards.
Safety Instructions for Power Cables and Accessories
Use Proper power source only. Start only with power source that satisfies voltage label and
the voltage necessary according to this manual. Please contact technical support personnel of
Vantron for any uncertainty about the requirements of necessary power source.
Use tested power source. This product still contains a button lithium battery as a real-time
clock after its external power source is removed and therefore should not be short-circuited during
transportation or placed under high temperature.
Place cables properly: Do not place cables at any place with extrusion danger.
Cleaning Instructions
Please power off before cleaning the device.
Do not use spray detergent.
Clean with a damp cloth.
Do not try cleaning exposed electronic components unless with a dust collector.
Support for special fault: Power off and contact technical support personnel of Vantron in case
of the following faults:
The device is damaged.
The temperature is excessively high.
Fault is still not solved after operations according to the manual.
Contents
1. OVERVIEW ........................................................................................................................................................................... 1
1.1 Introduction ...................................................................................................................... 1
1.2 Order Information............................................................................................................. 2
2. VT-TABLET-5081S HARDWARE INSTRUCTIONS ................................................................................................................ 3
2.1 Product Appearance ........................................................................................................ 3
2.2 Specifications................................................................................................................... 5
2.3 Buttons............................................................................................................................. 6
2.4 Interface Description ........................................................................................................ 6
2.4.1 USB OTG (Type C) ...................................................................................................................................................... 6
2.4.2 Audio Jack ................................................................................................................................................................. 6
2.4.3 Speakers .................................................................................................................................................................... 7
2.4.4 FM ............................................................................................................................................................................. 7
2.4.5 Wi-Fi and Bluetooth .................................................................................................................................................. 7
2.4.6 LTE ............................................................................................................................................................................. 7
2.5 Packing List ..................................................................................................................... 7
3. SOFTWARE INSTRUCTION .............................................................................................................................................. 8
4. DEVICE INSTRUCTIONS................................................................................................................................................... 9
5. TIPS............................................................................................................................................................................. 10
6. FCC WARNING STATEMENTS......................................................................................................................................... 12
7. RF EXPOSURE INFORMATION(SAR)............................................................................................................................... 13
APPENDIX A: HOW TO CONTACT US........................................................................................................................................ 14
VT-TABLET-5081S User Manual
1
1. Overview
1.1 Introduction
Thank you for choosing Vantron. It is our commitment to provide our valued customers
with the embedded devices equipped with the state-of-the-art technology and product
services.
Tablet enables interaction between operators/users and applications, connects industrial
control products such as wireless, transducer, built-in battery, storage, etc. Tablet adopts
a display and supports units such as touch screen, keyboard, audio, sensors, etc. As a
digital device for information interaction between human and machine, tablet is composed
of hardware and software. Based on its ample function interfaces and powerful user
operational interfaces, it is very suitable for control units such as medical device,
intelligent transportation, industry, etc.
Vantron’s VT-Tablet products are based on the most advanced ARM and Rockchip
processors and have low power consumption and high integration. The products are
designed for applications in industry, medicine, transportation, etc.
VT-TABLET-5081S User Manual
4
Figure 2-2 Back view
Indice
Altri manuali Vantron Tavoletta
Vantron
Vantron VT-TAB185-SKLU Manuale utente
Vantron
Vantron IQ Hub Manuale utente
Vantron
Vantron M05 Manuale utente
Vantron
Vantron LNG-PRN-0137 Manuale utente
Vantron
Vantron VT-MOD-CELL-B48 Istruzioni per l’uso
Vantron
Vantron VT-PNL156-MT65-HD Istruzioni per l’uso
Vantron
Vantron VT-TABLET-5081-N Manuale utente
Vantron
Vantron VT-TABLET-5081 Manuale utente
Vantron
Vantron VT-TAB07-RK68H Istruzioni per l’uso
Vantron
Vantron M10 PRO Istruzioni per l’uso
