Vanward GD4819S Manuale utente
1
GAS GRILL ASSEMBLY, USE AND CARE MANUAL GD4819S
Do not attempt to assemble and use this grill unless you read this entire manual thoroughly.
Keep it in a handy place as it has answers for questions that may occur in your future use.
NOTE: THIS APPLIANCE IS NOT INTENDED TO INSTALL IN OR ON RECREATIONAL
VEHICLES OR BOATS.
FOR OUTDOOR
USE ONLY
2
！！！WARNING！！！
1. Failure to follow all manufacturers’ instructions could result in serious body injury
and/or property damage.
2. Some parts of this grill may have sharp edges—especially as mentioned in this
manual! Wear suitable protective gloves if necessary.
3. Only to be used outdoors.
4. Read the instructions before using the appliance.
5. Warning: accessible parts may be very hot. Keep young children away.
6. Do not move the appliance during use.
7. Turn off the gas supply at the gas container after use.
8. Any modification of the appliance may be dangerous.
9. Never mount the cylinder under the BBQ on the base shelf as this will result in
serious injury to the user.
10.If the ground temperature is above 50K, the surface needs protection.
TECHNICAL DATA
Total heat input: 17.2 kW (main burner: 14.0 kW + side burner: 3.2 kW)
Gas consumption: 1252 g/h (main burners: 1019 g/h + side burner: 233 g/h)
Gas bottle: standard cylinder.
Make sure the gas cylinder is lower than the gas connection/gas inlet
Always place gas cylinder/bottle on a flat level surface DO NOT fix on trolley. Care should be taken so the gas
hose and gas cylinder do not come in contact with hot surfaces or sharp edges, and should not pass under the
barbecue
Pressure reducer: comply with EN16129 (Flow rate: max. 2.0 kg/h)
Gas hose: comply with EN standard or local market standard (max. 1.5m, max. FI 1.2m)
Gas system information:
Gas Category Category I3+ (28~30/37) Category I3B/P(30) Category I3B/P(37) Category I3B/P(50)
Gas Type Butane at (28~30)
mbar/ Propane at 37
mbar;
G30(Butane),G31
(Propane) or their
mixtures at
(28~30) mbar
G30(Butane),G31(
Propane) or their
mixtures at 37
mbar
G30(Butane),G31
(Propane) or their
mixtures at 50
mbar
Injector Size (Dia.
mm) Grill burner: 0.91
Hotplate burner: 0.86
Grill burner: 0.91
Hotplate burner:
0.86
Grill burner: 0.87
Hotplate burner:
0.81
Grill burner: 0.80
Hotplate burner:
0.76
Destination of
Countries
BE, FR, IT, LU, LV,
IE, GB, GR, PT, ES,
CY,
CZ, LT, SK, CH, SI
LU, NL, DK, FI,
SE, CY, CZ, EE,
LT, LV, MT,
SK, SI, BG, IS,
NO, TR, HR, RO,
IT, HU
PL AT, DE, SK, CH,
LU
This appliance has been made with regard to the European Gas Appliance Standard EN498 and EN484 and
bears the CE certification
Which gas category or gas type will be used, please check the detail information on the appliance.
3
1.Patns List
CODE PART QTY
HOOD&BODY
A1 Hood (Pre-Assembled to Body) 1
A2 Burner 4
A3 Cooking grid 1
A4 Warming rack 1
A5 Grease cup 1
A6 Drip tray 1
A7 Side burner valve/Hose Assembly 1
A8 Flame Tamer 2
A9 iron plate 1
SIDE SHELF
B1 side shelf 1
B2 Knob 5
B3 Side shelf Knob bezel 1
B4 Side burner 1
B5 side burner shelf 1
B6 Side burner grid 1
B7 Hook 1
TROLLEY
C1 Right side trolley Assembly 1
C2 Side panel 2
C3 Door (R) 1
C4 Lock castor 2
C5 Trolley Base 1
C6 magnet 1
C7 Door handle 2
C8 castor 2
C9 Door (L) 1
C10 Left side trolley Assembly 1
C11 Upper rim 1
C12 Rear panel 1
C13 LightingRodAssembly 1
HARDWARE
D1 M6×12 bolt & Ø6 spring washer 15
D2 Door axe 2
D3 Ø6 washer 4
D4 M3×15 bolt 2
D5 M4×8 bolt & Ø4 spring washer 8
D6 M5×12 bolt & Ø5 spring washer 14
4
2. Parts Diagram
5
3.Hardware Reference Diagram
ASSEMBLY INSTRUCTIONS
PLEASE READ THE INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP.
THE GRILL SHOULD BE INSTALLED BY TWO PERSON.
TOOLS REQUIRED:
Head screwdriver & wrench (not provided).
6
Step1: Attach the Trolley Base (C5) onto Right Side Trolley Assembly (C1) and Left Side
Trolley Assembly (C10) using M6×12 Bolt & Ø6 Spring Washer (D1) as shown.
Insert the two Lockable Castors (C4) and two standard Castors (C8) into the trolley frame
assembly as shown.
Step2: Attach the Side Panels (C2) and Rear Panel (C12) to the trolley frame using M5×12
Bolt & Ø5 Spring Washer (D6), and to the bottom panel using M6×12 Bolt & Ø6 Spring Washer
(D1) as shown.
7
Step3:Attach the Magnet (C6) onto bottom panel using M3×15 Bolt (D4).
Attach the Door Axes (D2) to the trolley frame in the areas as shown.
Step4:Attach the Upper Body Support (C11) onto the trolley frame assembly using M6×12
Bolt & Ø6 Spring Washer (D1) as shown.
8
Step5:Attach the Door Handles (C7) onto the Left Door (C9) and Right Door (C3) using
M4×8 bolt & Ø4 spring washer as shown.
M4*8 4 pcs
C9C3
C7D5
D5
Step6: Fit the doors to the cabinet by placing them into the door axes and then depressing
the spring pins to insert into the upper body support.
9
Step7：Push the control knobs (B2) onto the valve stems on the control panel.
Step8：
Carefully place the Hood and Barbecue Body (A1) onto the trolley assembly.
WARNING: DO NOT RELEASE THE BARBECUE BODY WHILE THE BARBECUE HAS
NOT BEEN PROPERLY SEATED. THIS MAY RESULT IN INJURY OR DAMAGE TO YOUR
BARBECUE.
Attach the barbecue body to the trolley assembly using the M6x12 Bolt & Ø6 Spring Washer
(D1) and Ø6 Washer (D3).
10
Step9: Insert the Side Shelf (B1) into the two slots on the right side of the barbecue as
shown.
Step10: Tighten the pre-installed screws as the below picture shown.
Indice
Altri manuali Vanward Griglia
