VARIZOOM MEDIA RIG Manuale utente

VZ-DVMediaRig

Professional Camera Support

Kit includes: (1) Adjustable Shoulder

Arch (2) Handle Section (3) Belt (4)

Spring Pod (5) Quick-release Plate (6)

Tilt Lever (7) Accessory Mount (8)

Swiveling counterweight (may differ from

picture)

WARNING: NEVER POINT THE TIP OF THE SPRING POD AT YOUR FACE. ONLY LOOSEN

THE CLAMPS WHEN THE SPRING POD IS ATTACHED TO THE LOADED DV MEDIA RIG. THE

SPRING POD CAN POP OUT QUICKLY AND CAUSE INJURY IF THESE RULES ARE NOT

FOLLOWED.

1) Connect the handles to the shoulder arch by

sliding the smaller end of the handle

assembly through the stainless steel cylinder.

Secure the two sections together by inserting

the tilt lever (6) through the stainless steel

cylinder and threading it into the handle

section. The tilt lever adjusts the tension on

the tilt action of the handles. The position of

the lever can be adjusted without loosening –

simply grab the lever and press on the red

button, then adjust the angle of the lever.

2) The swiveling counterweight can be adjusted to the left or right to

compensate for balance issues created by the camera and other

mounted accessories. For now, tighten the pivot knob thoroughly

so it doesn’t move while you are mounting the camera and

accessories and making adjustments to the Rig.

3) Attach the quick-release plate to your camera using the appropriate screw. Remove the

unused screw and store in a secure location. Once the quick-release plate is firmly attached to

your camera, set it aside.

4) Attach the belt to your waist with the holster facing front. Take the spring pod and insert the

flat end into the holster, making sure to run the pod through the D-ring at the top of the holster.

Do not loosen the spring pod clamps yet.

5) Make sure the tilt lever on the DV Media Rig is tightened so the

handles don’t rotate easily and the unit can stand securely. Take

the camera with quick-release plate attached and secure it to the

base plate on the DV Media Rig. Pick up the Rig and place it over

your shoulder. The front of the Rig must be attached to the spring

pod. Insert the brass tip of the spring pod into the coiled spring on

the underside of the handle assembly. Once the spring pod is

secured, loosen the spring pod clamps.

6) If you plan to attach any accessories such as a light, mic, XLR mic adapter, etc., go ahead and

attach them to the accessory mount and fix it to the Rig.

7) With the Rig fully mounted and loaded, you’ll know if any position and balancing adjustments

need to be made. You can adjust the side-to-side balance of the camera by loosening the

single-wing knob above the spring pod attachment point and sliding the camera platform. You

can also adjust the side-to-side balance by pivoting the counterweight at the rear.

8) The primary positional adjustment is at the shoulder pivot. This

will allow you to change the angle and height of the shoulder arch

for maximum comfort.

The tilt lever allows you to change the amount of tension in the

tilting mechanism or soft-lock the tilt position. Never operate the

Rig with the tilt lever excessively loose.

Depending on the weight of your camera, you may want to lock one of the sections of the

spring pod to minimize the spring action. You can also extend and lock both sections for

elevated shots.

The DV Media Rig is covered by a 2-year parts & labor warranty against defects.

If you have any questions, give us a call or shoot us an email –www.varizoom.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali VARIZOOM Accessori per fotocamere

VARIZOOM

VARIZOOM VZ-QuickJib Manuale utente

VARIZOOM

VARIZOOM CP JR Manuale utente

VARIZOOM

VARIZOOM Cinema Pro JR-K5 Manuale utente

VARIZOOM

VARIZOOM FLOWCAM GT Manuale utente

VARIZOOM

VARIZOOM CrossFire FP Manuale utente

VARIZOOM

VARIZOOM VZ-FlowPod Mini Manuale utente

VARIZOOM

VARIZOOM VZ-MC100 Manuale di installazione

VARIZOOM

VARIZOOM FlowPod Manuale utente

VARIZOOM

VARIZOOM CP Micro Manuale utente

VARIZOOM

VARIZOOM Solo Slider Dolly Manuale utente

VARIZOOM

VARIZOOM VZ-FH100 Manuale utente

VARIZOOM

VARIZOOM VZ-MC50 Dual Manuale utente

VARIZOOM

VARIZOOM VZ-MC50 Manuale utente

VARIZOOM

VARIZOOM VZ-LSP Manuale utente

VARIZOOM

VARIZOOM SoloJib Manuale utente

VARIZOOM

VARIZOOM S1080BS Manuale utente

VARIZOOM

VARIZOOM VZ-MC50 Manuale utente

VARIZOOM

VARIZOOM StealthyPro Manuale utente

VARIZOOM

VARIZOOM VZ-FC350K Manuale utente

VARIZOOM

VARIZOOM VZ-EFC2 Manuale utente

VARIZOOM

VARIZOOM VZ-EFC-U Manuale utente

VARIZOOM

VARIZOOM AutoRig Manuale utente

VARIZOOM

VARIZOOM VZ-MC100 Manuale utente

VARIZOOM

VARIZOOM Cinema Pro JR Manuale utente

Manuali Accessori per fotocamere popolari di altre marche

Viltrox

Viltrox EF-NEX Istruzioni per l'installazione

Calumet

Calumet 7100 Series CK7114 Manuale utente

Ropox

Ropox 4Single Series Manuale utente

Cambo

Cambo Wide DS Digital Series Istruzioni operative

Samsung

Samsung SHG-120 Manuale utente

Ryobi

Ryobi BPL-1820 Manuale operativo

Aegis

Aegis ABL-36020P Manuale utente

Pentax

Pentax Data Back Fc Manuale utente

Fantasea

Fantasea EyeGrabber F Series Manuale utente

Honeywell

Honeywell HDZ20HD Manuale utente

EGO

EGO BA1400T Manuale utente

Sima

Sima SRW-62 Manuale utente

Shape

Shape A7SSMKIT Manuale utente

Slide Kamera

Slide Kamera HST-2 Manuale utente

Power works

Power works 2902613 Manuale utente

SES

SES SE-2047-2 Manuale utente

Olympus

Olympus PT-EP05L Manuale utente

Starlite

Starlite OctoDome nxt Manuale utente